Escolar Documentos
Profissional Documentos
Cultura Documentos
February 2006
General
Be aware that the initialization will take around 6 minutes for BSC
bring-up and additional time for NE alignment.
System initialization
10.Switch on PWRD:1
11.Unlock PWRD:1
12.Perftest Disk:1
13.Unlock Disk:1
Once the disk is unlocked, the cross copy is started. But MPCC:1 and
TDPC:1 will stay in disable because hotlinks problem
14.Set BSCESUSW and BSCESUDB to “Backup_ESU”.
System initialization
Start Initialization:
1.Switch off BSC Base power
2.Disconnect cables and extract MPCC:0
3.Disconnect cables and extract TDPC:0
4.Replace MPCC:0 and TDPC:0 with new board V9
5.Connect all cables for MPCC and TDPC both copy
6.Switch on PWRD:1
MPCC FW will restart from backup repository of disk copy_1
7.Switch on PWRD:0
The system detects that Disc not aligned and initiates crosscopy.
Test Call