icha computer printing is a private company engaged in services, especially printing, the company was founded in 2007 and this is the 12th year the company is engaged, the company is located in Jl Panjaitan complex Kawasaki dealers city of Gorontalo • PURPOSE The purpose of making a report entitled "Making ID Card" is as follows: 1. To find out, understand how to make ID cards 2. to find out, understand the work process in making ID cards 3. As the author's experience in compiling a report of the work that has been carried out The process of making ID cards is based on the following stages of activity: Make a Design Image in accordance with the Design Brief Printing Completion / Finishing • Make a design image in accordance with the brief design The Brief Design is the design desired by the Customer or Consumer who will make the ID Card. Making ID Card design is done using a computer with a graphics program in this case the program used is Corel Draw. Making a design with a computer, will obtain maximum results in accordance with the order. This design process is a very important step because if our settings are wrong it will certainly make the results not good, some important points to note are: The size of the ID Card material is 200x300 mm, so adjust the computer settings using this size. ID Card consists of 2 faces (reciprocity), typing on the front of the position is different from the back. For example for the front of the sequence as shown below. Then typing on the back becomes like the picture below. The Corel Draw application method in designing is: the first step is to turn on the computer, then click star select the Corel Draw program, after the Corel Draw program is open then we start designing by making a box first using the Restangel Tool, Click on the Restangel Tool, then for our Beackground Click the file select Import, then find the image that we will use. after that click on Effect then select Powerclip and choose Plase Inside Countainer, to insert the picture into the box, click on that box. Then click Import again to take a photo after that make a small box and then enter the photo in the same way. After that click the Text Tool to make a Name. Now the results will look like the image below. PRINTING After the Design Brief is finished, it is printed on the Hvs paper to be asked for approval of the order of the design that has been produced, both in terms of pictures, writing, color, color brightness, composition and others. Noteworthy in this process are: ID Card material sheets are divided into 2 parts, namely parts which can be printed and parts that cannot be printed. The part that can be printed is usually coarser and not shiny, while the part that can't be printed is smoother and looks to reflect light. Designs that are ready to be printed on the ID Card must be printed on the Horizontal Mirror both face and back. For example the face after the Mirror. the next step before printing the ID Card design is arranged in advance as many as 5 (five) lines in 2 (two) rows. Because each opaque paper can be printed as many as 10 ID Cards. Next install the top opaque paper to print the top design and the bottom opaque to print the bottom. Before printing an image or image must be terrorized first. To produce these prints or print orders. Click the file select print, then set the paper size to be used ie A4. then choose the type of printer then click Ok. The tools used are: a set of computers and color printers or EPSON STYLUS C90 printers. COMPLETION / FINISHING Incorporation of printouts on the bottom and top Pressing Call From the discussion above it can be concluded that the process of making an ID card must be done according to the procedure in order to get maximum results