Escolar Documentos
Profissional Documentos
Cultura Documentos
Ltd
TOTAL SOLUTIONS IN CAD, CAM & CAE
ABOUT US
Please note:
Initially you can provide us with 3D modeling project for mutual understanding,
and down the line we can start working with design projects.
3DCAD’s Domain and Experience
3DCAD has
Domain Capabilities
DEFROST DISTRIBUTOR
DASH BOARD - FLAP
DASH PANEL
VENTILLATION DUCT
PLENUM CHAMBER
Capabilities-Aerospace
Wind screen
Canopy
Front fuselage
Fuselage spine
Center fuselage
Rear fuselage
Aft surround structure
Lower surround structure
Door Assembly
Projects executed
Component: Enclosures
Software : Solid Works & CATIA V5
Projects executed - Casting
Component : Casting Components Software: Unigraphics
Projects executed - Automation
SOFTWARE : CATIA
Projects executed - Plastics
Component : PRODUCT DESIGN
Objective : Design and Development
from functional requirements
Software : Solid Edge , Pro-Engineer,
Solid Works,
Mold Flow Analysis (4 Cavities Mold)
Capabilities - Machine & Tooling
Min. Z disp.
Un-displaced position
Max. Z disp.
Displaced position
Displacement Plot
Projects Executed
Projects Executed
Data Migration
Input
• 2D pdf files (Part drawings & Assembly drawings)
Output
• 2D Auto CAD Drawing in .DXF or .DWG format
Component : Ribbon Printing machine
Objective : Data migration from 2D
drawing to CATIA V4
Challenges : In put file was 2D hard
copy drawings, the dimensions were
retrieved from the 2D drawings.
2D Hard Copy to 3D CAD Models
Input
• Existing 2D Auto CAD & Hard copy drawings
Output
• 3D Parametric Models
• Bottom up or Top down assembly
• Associative Drawings
• File Structure and specification tree as per customer
Standards
2D to 3D Conversion
Existing 2D drawings
• Input 2D part file and assemblies
• 104 Part files
• 11 Assemblies
Conversion Status:
• Validation using different contracts to start after web-based system is in place
NO. OF STRIPS 24
POLE COIL
ASSY. POLE PIECE ASSY.
2D to 3D Conversion
Conversion Status:
Creation of parametric & Master models/assemblies for new Valve
body components
Creation of master models and assemblies based on different
models
Start models for Engineering Analysis
User friendly help menus to assist in filling inputs from the
drawing
Strategy for building automated drawings from engineering
models
2D Drawing (Input)
Rib Option and related
dimension.
Valve Size and Mass in
the BOM
ORing Option
Middle Rib Option
‘T’ Rib Option Pocket Option
3D model - Output
Closed Open Position
Position
Client Engagement Models
We hope to build long term & sustainable relationships based on these values.
We are committed to give the total solutions for our customer from Concept
Design till the Prove out with our manufacturing facility