Escolar Documentos
Profissional Documentos
Cultura Documentos
RPC is an ultra high strength and high ductility cementitious composite with advanced mechanical and chemical properties.
fume, cement & quartz sand with very low water cement ratio.
First developed by P. Richard and M. Cheyrezy and RPC was first produced in the early 1990s by researchers at Bouygues laboratory in France.
CEMENTS SILICA FUMES SAND QUARTZ POWDER STEEL FIBERS WATER SUPER PLASTICIZERS
RPC is able to obtain its improved properties by using a very dense mix, consisting of fine particles and fibers. o Low w/cm ratio : 0.16 to 0.24 (as low as 0.13) o Cement with low C3A content give better result (C3A-1%8%) o Silica fume (25% by weight) o High dosages of super plasticizer. o Fine quartz sand (150-600m) (SG=2.75) o Steel fibers (2.5-10% by volume) for toughening o No rebar needed o Cured in steam bath for 48 hrs @ 190F (88C) after initial set, placed under pressure at the molding stage.
COMPONENTS
FUNCTION PARAMETERS
Strength to aggregates. Binding material Maximum reactivity during heat treating. Filling the voids. Improve ductility. Reduces water binding.
Elimination of coarse aggregate for enhancement of homogeneity. Utilization of pozzolanic properties of silica fume. Optimal usage of super plasticizer to reduce W/C and at the same time improves compaction. Post- set heat treatment for enhancement of the microstructure. Addition of small sized steel fibers to improve ductility.
Portland cement-type V Fine Sand (150-400 micron) Silica fume (18m2/gram) Precipitated silica(35 m2/g) Super plasticizer (polyacrylate) Steel fibers Total water Compressive strength(cylinder) Flexural strength Youngs modulus
955 kg/m3 1051 kg/m3 229 kg/m3 10 kg/m3 13 kg/m3 191 kg/m3 153 kg/m3 170-230 MPa 25-60 MPa 54-60 GPa
Portland cement-type V Fine Sand (150-400 micron) Ground Quartz (4 microns) Silica fume (18m2/gram) Super plasticizer (polyacrylate) Steel fibers Total water Compressive strength(cylinder) Flexural strength Youngs modulus
1000kg/m3 500kg/m3 390 kg/m3 230 kg/m3 18 kg/m3 630 kg/m3 180 kg/m3 490-680 MPa 45-102 MPa 65-75 GPa
COMPRESSIVE STRENGTH FLEXURAL STRENGTH WATER ABSORPTION WATER PERMEABILITY HOMOGENITY COMPACTNESS MICROSTRUCTURE MATERIAL DUCTILITY
Plain RPC is found to possess marginally higher flexural strength than HPC. The increase of flexural strength of RPC with the addition of steel fibers is higher than that of HPC.
Flexural strength at first cracking is higher than ultimate flexural strength of normal concrete.
Property
RPC 200
Compressive strength
80 MPa
200 MPa
Flexural strength
7 MPa
40 MPa
Modulus of Elasticity
40 GPa
60 GPa
Fracture Toughness
<10 J/m
30*10 J/m
The percentage of water absorption of RPC is very low compared to that of HPC.
This quality of RPC is one among the desired properties of nuclear waste containment materials. Incorporation of fibers and use of heat curing marginally increase the water absorption. The permeability of RPC is almost 7 times lower than that of HPC.
Improved by eliminating all coarse aggregates. Replaced by fine sand ( 600m maximum)
Reduction in aggregate/matrix ratio.
COMPACTNESS:
Application of pressure before and during concrete setting period.
MICROSTRUCTURE:
Microstructure of the cement hydrate can be changed by applying heat treatment during curing.
MATERIAL DUCTILITY: Material ductility can be improved through the addition of short steel fibres
Used in nuclear waste containment structures due to lower water absorption and low permeability.
Used for heavily loaded structures like bridges due to its ultra high strength and durability.
First bridge that used RPC-pedestrian bridge in Sherbrooke, Quebec, Canada. (230MPa) It was used during the early days of RPC production. Has prompted bridge building in North America, Europe, Australia, and Asia.
Least costly components of conventional concrete are replaced by more expensive elements.
Since RPC is in its infancy, a long term properties are not yet known.
It has immense potential in construction due to its superior, mechanical &durability properties. RPC has ultra dense micro structure , giving advantageous water proofing &durability characteristics. RPC is a better alternative to High Performance Concrete and has the potential to structurally compete with steel.
Development of a lightweight reactive powder concrete, journal of advanced concrete technology, No. 3, vol. 2
A.S Dili and Manu Santhanam, investigation on RPC:A developing ultra high strength technology, The Indian concrete journal, April 2004. M S Shetty , concrete technology S. Chand & company LTD, Ram Nagar New Delhi.