Você está na página 1de 115

Welcome to Physical Science

You will succeed in this course If YOU apply yourself & Take Good Notes !

Table of Contents

Unit 1: Energy and Motion

Chapter 1: The Nature of Science


1.1: The Methods of Science 1.2: Standards of Measurement

1.3: Communicating with Graphs

The Methods of Science

1.1

What is Science?

Science is a method for studying the natural world. It is a process that uses observation and investigation to gain knowledge about events in nature.

The Methods of Science

1.1

What is Science?

Copy: It is a system of knowledge and the methods used to find that knowledge!
Scientists ask questions to learn about the natural world.

The Methods of Science

1.1

Major Categories of Science

Science can be classified according to three main categories. Life science deals with living things. Earth science investigates Earth and space. Physical science deals with matter and energy.

1.1

Big Ideas of Physical Science


Copy for Test
a. A very small amt. of the universe is matter. b. Matter has Volume and Mass ! c. All Matter is made of Atoms!

Matter and Change:

Forces and Motion:

a. If you push on something still it will move. b. If you push on something moving you will change its motion. c. Forces cause change in motion. The laws of physics allows us to measure these changes in motion.

The Methods of Science

1.1

Science Explains Nature


a. Energy exists in many forms.
b. Kinetic Energy vs. Potential Energy

Energy:

What is the Difference? c. When matter changes Forms Energy is released or gained.

Energy is Transferred but NEVER DESTROYED !

Major Topics - Chemistry


Scientific Inquiry Matter Atoms Atomic Theory Periodic Table Writing and Balancing Equations Acids and Bases

Major Topics - Physics


Motion Newtons Laws Force Work and Power Electricity Magnetism Waves Light

The Methods of Science

1.1

Investigations

Scientists learn new information about the natural world by performing investigations, which can be done in many different ways. Some investigations involve simply observing something that occurs and recording the observations.

The Methods of Science

1.1

Investigations

Other investigations involve setting up experiments that test the effect of one thing on another. Some investigations involve building a model that resembles something in the natural world and then testing the model to see how it acts.

The Methods of Science

1.1

Scientific Methods

An organized set of investigation procedures is called a scientific method. Six common steps found in scientific methods are shown.

The Methods of Science

1.1

Stating a Problem

Many scientific investigations begin when someone observes an event in nature and wonders why or how it occurs. Then the question of why or how is the problem.

Sometimes a statement of a problem arises from an activity that is not working.

The Methods of Science

1.1

Researching and Gathering Information

Before testing a hypothesis, it is useful to learn as much as possible about the background of the problem. Have others found information that will help determine what tests to do and what tests will not be helpful?

The Methods of Science

1.1

Forming a Hypothesis

A hypothesis is a possible explanation for a problem using what you know and what you observe. For example, NASA scientists hypothesized that a ceramic material might withstand the heat and forces of reentry and could work on the space shuttle.

The Methods of Science

1.1

Testing a Hypothesis

Some hypotheses can be tested by making observations. Others can be tested by building a model and relating it to reallife situations.

The Methods of Science

1.1

Testing a Hypothesis

One common way to test a hypothesis is to perform an experiment. An experiment tests the effect of one thing on another using controlled conditions.

The Methods of Science

1.1

Variables

A variable is a quantity that can have more than a single value.


You might set up an experiment to determine which of three fertilizers helps plants to grow the biggest. Possible factors include plant type, amount of sunlight, amount of water, room temperature, type of soil, and type of fertilizer.

The Methods of Science

1.1

Variables

In this experiment, the amount of growth is the dependent variable because its value changes according to the changes in the other variables.
Plant A Amount of Water 4 oz. every three days 4 oz. every three days 4 oz. every three days 4 oz. every three days Amount of Sun 6hr/day Fertilizer Type A Height after two weeks 16cm

B
C D

6hr/day
6hr/day 6hr/day

B
C none

14cm
18cm 10cm

The Methods of Science

1.1

Variables

The variable you change to see how it will affect the dependent variable is called the independent variable.
Plant A Amount of Water 4 oz. every three days 4 oz. every three days 4 oz. every three days 4 oz. every three days Amount of Sun 6hr/day Fertilizer Type A Height after two weeks 16cm

B
C D

6hr/day
6hr/day 6hr/day

B
C none

14cm
18cm 10cm

The Methods of Science

1.1

Constants and Controls

A factor that does not change when other variables change is called a constant.
You might set up four trials, using the same soil and type of plant.

Each plant is given the same amount of sunlight and water and is kept at the same temperature. These are constants.

The Methods of Science

1.1

Constants and Controls

The fourth plant is not fertilized. This plant is a control. A control is the standard by which the test results can be compared.
Plant A B C D Amount of Water 4 oz. every three days 4 oz. every three days 4 oz. every three days 4 oz. every three days Amount of Sun 6hr/day 6hr/day 6hr/day 6hr/day Fertilizer Type A B C none Height after two weeks 16cm 14cm 18cm 10cm

The Methods of Science

1.1

Constants and Controls

Suppose that after several days, the three fertilized plants grow between 2 and 3 cm.
Plant A B C D Amount of Water 4 oz. every three days 4 oz. every three days 4 oz. every three days Amount of Sun 6hr/day 6hr/day 6hr/day 6hr/day Fertilizer Type A B C none Height after two weeks 16cm 14cm 18cm 10cm

4 oz. every three days

The Methods of Science

1.1

Constants and Controls

If the unfertilized plant grows 1.5 cm, you might infer that the growth of the fertilized plants was due to the fertilizers.
Plant A B C D Amount of Water 4 oz. every three days 4 oz. every three days 4 oz. every three days Amount of Sun 6hr/day 6hr/day 6hr/day 6hr/day Fertilizer Type A B C none Height after two weeks 16cm 14cm 18cm 10cm

4 oz. every three days

The Methods of Science

1.1

Analyzing the Data

An important part of every experiment includes recording observations and organizing the test data into easy-to-read tables and graphs. Interpreting the data and analyzing the observations is an important step.
If the data are not organized in a logical manner, wrong conclusions can be drawn.

The Methods of Science

1.1

Drawing Conclusions

Based on the analysis of your data, you decide whether or not your hypothesis is supported.

For the hypothesis to be considered valid and widely accepted, the experiment must result in the exact same data every time it is repeated.

The Methods of Science

1.1

Being Objective or FAIR

A bias occurs when you only test the experiment on yourself or a very small population.

The Methods of Science

1.1

Being Objective Scientists can lessen bias by running as many trials as possible and by keeping accurate notes of each observation made. Valid experiments also must have data that are measurable.

The Methods of Science

1.1

Being Objective

The experiment must be repeatable.


Findings are supportable when other scientists, or Mr. Litaker, performs the same experiment and gets the same results.

The Methods of Science

1.1

Visualizing with Models

Sometimes, scientists cannot see everything that they are testing.

They might be observing something that is too large, too small, or takes too much time to see completely.

The Methods of Science

1.1

Visualizing with Models

A model represents an idea, event, or object to help people better understand it.

The Methods of Science

1.1

Models in History

Example: To better understand how the Earth rotates on its axis, you could look at a globe, which is a small-scale model of Earth. Models help visualize things too small to be seen.

Build Model Planes


Fold a Sheet of paper into an airplane. Throw the plane.

How did the plane Fly?


Now make wing flaps. Turn them in different directions.

The Methods of Science

1.1

High-Tech Models

Today, many scientists use computers to build models. NASA experiments involving space flight would not be practical without computers.

The Methods of Science

1.1

High-Tech Models

Another type of model is a simulator.

The Methods of Science

1.1

High-Tech Models

An airplane simulator enables pilots to practice problem solving with various situations and conditions they might encounter when in the air. This model will react the way a plane does when it flies.

The Methods of Science

1.1

Scientific Theories and Laws

A scientific theory is an explanation of things or events based on knowledge gained from many observations and investigations. It is not a guess.

Just because a scientific theory has data supporting it does not mean it will never change.

The Methods of Science

1.1

Scientific Theories and Laws

A scientific law is a statement about what happens in nature and that seems to be true all the time. A Law is a Rule of Nature A Law summarizes a Pattern found in nature. Gravity is an example of a scientific law.

The Methods of Science

1.1

Scientific Theories and Laws

A theory can be used to explain a law. For example, many theories have been proposed to explain how the law of gravity works. Even so, there are few theories in science and even fewer laws.

The Methods of Science

1.1

The Limitations of Science

Science can help you explain many things about the world, but science cannot explain or solve everything.

The Methods of Science

1.1

The Limitations of Science

They cannot be tested. You might take a survey to get peoples opinions about such questions, but that would not prove that the opinions are true for everyone.

The Methods of Science

1.1

Using ScienceTechnology

Technology is the application of science to help people.

The Methods of Science

1.1

Using ScienceTechnology

For example, when a chemist develops a new, lightweight material that can withstand great amounts of heat, science is used. When that material is used on the space shuttle, technology is applied.

The Methods of Science

1.1

Using ScienceTechnology

Technology doesnt always follow science, however, sometimes the process of discovery can be reversed. Science and technology do not always produce positive results. The benefits of some technological advances, such as nuclear technology and genetic engineering, are subjects of debate.

Section Check

1.1

Question 1
What are the three main categories of science?

Answer
The three main categories of science are life, earth, and physical.

Section Check

1.1

Question 2
How are science and technology related?
a. Technology is a branch of natural science. b. Science is a branch of technology. c. Advances in science may lead to advances in technology and vice versa. d. Science and technology are not related. Answer: C

Section Check

1.1

Question 3
Which of the following is the group in an experiment in which all conditions are kept the same? A. standard B. independent variable C. experimental D. control

Question 4
What are the Building blocks of Matter?
Atoms

Question 5
In which step of the scientific method is information obtained through the senses? a. drawing conclusions b. making observations c. analyzing data d. revising a hypothesis Answer: b

Section Check

1.1

Question 6
What happens when the data in an investigation do not support the original hypothesis?
a. The scientist gives up and starts an investigation on a new topic. b. The data must be incorrect and are thrown out. c. The hypothesis will be revised. d. The data are altered so that they support the original hypothesis.

Answer: c

Question 7
What is a statement that summarizes a pattern found in nature? a. a scientific law b.a fact c. a scientific theory d. a hypothesis Answer: a

Question 9
What is a physical or mental representation of an object or an event?

a. b.

a theory a hypothesis Answer: c

c. d.

a model a scientific law

Question 10
Why are scientific models important? a. They prove scientific theories. b. They help visualize things that are very complex, very large, or very small. c. They make it harder to understand things. d. They never change. Answer: b

Standards of Measurement

1.2

Units and Standards

A standard is an exact quantity that people agree to use to compare measurements. Suppose you and a friend want to make some measurements to find out whether a desk will fit through a doorway. You have no ruler, so you decide to use your hands as measuring tools.

Standards of Measurement

1.2

Units and Standards

Even though you both used hands to measure, you didnt check to see whether your hands were the same width as your friends.

Standards of Measurement

1.2

Units and Standards

In other words, you didnt use a measurement standard, so you cant compare the measurements. Hands are a convenient measuring tool, but using them can lead to misunderstanding.

Standards of Measurement

1.2

Measurement Systems

Suppose the label on a ball of string indicates that the length of the string is 150. Is the length 150 feet, 150 m, or 150 cm? For a measurement to make sense, it must include a number and a unit.

Standards of Measurement

1.2

Measurement Systems

The English system of measurement is commonly used in the United States. Most other nations use the metric systema system of measurement based on multiples of ten.

Standards of Measurement

1.2

International System of Units

All SI standards are universally accepted and understood by scientists throughout the world. The standard kilogram is kept in Svres, France.

All kilograms used throughout the world must be exactly the same as the kilogram kept in France.

Standards of Measurement

1.2

International System of Units

Each type of SI measurement has a base unit.

The meter is the base unit of length.

Standards of Measurement

1.2

International System of Units

TEST Every type of quantity measured in SI has a symbol for that unit. All other SI units are obtained from these seven units.

Standards of Measurement

1.2

SI Prefixes

The SI system is easy to use because it is based on multiples of ten.

Standards of Measurement

1.2

SI Prefixes

Prefixes are used with the names of the units to indicate what multiple of ten should be used with the units. The most frequently used prefixes are shown.

Standards of Measurement

1.2

Measuring Distance

In scientific measurement length is the distance between two points. The SI base unit of length is the meter, m.

Metric rulers and metersticks are used to measure length.

Standards of Measurement

1.2

Choosing a Unit of Length

The size of the unit you measure with will depend on the size of the object being measured. You probably would use the centimeter to measure the length of your pencil and the meter to measure the length of your classroom.

Standards of Measurement

1.2

Measuring Volume

The amount of space occupied by an object is called its volume. If you want to know the volume of a solid rectangle, such as a brick, you measure its length, width, and, height and multiply the three numbers and their units together (V = 1 x w x h).

Standards of Measurement

1.2

Measuring Volume

For a brick, your measurements probably would be in centimeters. The volume would then be expressed in cubic centimeters, cm3.

Standards of Measurement

1.2

Measuring Liquid Volume

In measuring a liquids volume, you are indicating the capacity of the container that holds that amount of liquid.

The most common units for expressing liquid volumes are liters and milliliters.

Standards of Measurement

1.2

Measuring Liquid Volume

A liter occupies the same volume as a cubic decimeter, dm3. A cubic decimeter is a cube that is 1 dm, or 10cm, on each side.

Standards of Measurement

1.2

Measuring Matter

Mass is a measurement of the quantity of matter in an object.

A bowling ball has a mass of about 5,000 g.

Standards of Measurement

1.2

Measuring Matter

This makes its mass roughly 100 times greater than the mass of a golf ball and 2,000 times greater than a table-tennis balls mass.

Standards of Measurement

1.2

Density

The mass and volume of an object can be used to find the density of the material the object is made of.

Standards of Measurement

1.2

Density

Density is the mass per unit volume of a material.

Standards of Measurement

1.2

Density

You find density by dividing an objects mass by the objects volume.

Standards of Measurement

1.2

Derived Units

The measurement unit for density, g/cm3 is a combination of SI units. A unit obtained by combining different SI units is called a derived unit. An SI unit multiplied by itself also is a derived unit.

Standards of Measurement

1.2

Measuring Time and Temperature

It is often necessary to keep track of how long it takes for something to happen, or whether something heats up or cools down.
These measurements involve time and temperature. Time is the interval between two events. The SI unit for time is the second.

Standards of Measurement

1.2

Whats Hot and Whats Not

Think of temperature as a measure of how hot or how cold something is. For most scientific work, temperature is measured on the Celsius (C) scale.

Standards of Measurement

1.2

Whats Hot and Whats Not

On this scale, the freezing point of water is 0C, and the boiling point of water is 100C. Between these points, the scale is divided into 100 equal divisions. Each one represents 1C.

Standards of Measurement

1.2

Kelvin and Fahrenheit

The SI unit of temperature is the kelvin (K).

Zero on the Kelvin scale (0 K) is the coldest possible temperature, also known as absolute zero.
Absolute zero is equal to -273C which is 273 below the freezing point of water.

Standards of Measurement

1.2

Kelvin and Fahrenheit

Kelvin temperature can be found by adding 273 to the Celsius reading. So, on the Kelvin scale, water freezes at 273 K and boils at 373 K. The temperature measurement you are probably most familiar with is the Fahrenheit scale, which was based roughly on the temperature of the human body, 98.6.

Standards of Measurement

1.2

Kelvin and Fahrenheit

These three thermometers illustrate the scales of temperature between the freezing and boiling points of water.

Section Check

1.2

Question 1
A __________ is an exact quantity that people around the world have agreed to use to compare measurements. A. variable B. standard C. unit D. control

Section Check

1.2

Answer
The answer is B. SI standards are universally accepted and understood by scientists throughout the world.

Section Check

1.2

Question 2
A measurement must include both a number and a(an)
Answer:

A Unit

Section Check

1.2

Question 3
In an experiment, 0.014 seconds equals ____________________ milliseconds. Answer: 14

Section Check

1.2

Question 4
The amount of space occupied by an object is called _________?

Answer
The answer is volume. To find the volume of a solid rectangle, measure the rectangles length by its width by its height.

Question 5
____________________ is the closeness of a measurement to the actual value being measured. Answer: Accuracy

Communicating with Graphs

1.3

A Visual Display

A graph is a visual display of information or data.

This is a graph that shows a girl walking her dog.

Communicating with Graphs

1.3

A Visual Display

The horizontal axis, or the x-axis, measures time. Time is the independent variable because as it changes, it affects the measure of another variable.

Communicating with Graphs

1.3

A Visual Display

The distance from home that the girl and the dog walk is the other variable. It is the dependent variable and is measured on the vertical axis, or yaxis.

Communicating with Graphs

1.3

A Visual Display

Different kinds of graphsline, bar, and circleare appropriate for displaying different types of information.

Communicating with Graphs

1.3

A Visual Display

Graphs make it easier to understand complex patterns by displaying data in a visual manner. Scientists often graph their data to detect patterns that would not have been evident in a table. The conclusions drawn from graphs must be based on accurate information and reasonable scales.

Communicating with Graphs

1.3

Line Graphs

A line graph can show any relationship where the dependent variable changes due to a change in the independent variable.

Communicating with Graphs

1.3

Line Graphs

Line graphs often show how a relationship between variables changes over time.

Communicating with Graphs

1.3

Line Graphs

You can show more than one event on the same graph as long as the relationship between the variables is identical. Suppose a builder had three choices of thermostats for a new school. He wanted to test them to know which was the best brand to install throughout the building.

Communicating with Graphs

1.3

Line Graphs

He installed a different thermostat in classrooms, A, B, and C. He recorded his data in this table.

Communicating with Graphs

1.3

Line Graphs

The builder then plotted the data on a graph.

He could see from the table that the data did not vary much for the three classrooms.
So he chose small intervals for the y-axis and left part of the scale out (the part between 0 and 15).

Communicating with Graphs

1.3

Line Graphs

This allowed him to spread out the area on the graph where the data points lie. You can see easily the contrast in the colors of the three lines and their relationship to the black horizontal line.

The black line represents the thermostat setting and is the control.

Communicating with Graphs

1.3

Constructing Line Graphs

The most important factor in making a line graph is always using the x-axis for the independent variable.

The y-axis always is used for the dependent variable.

Communicating with Graphs

1.3

Constructing Line Graphs

Another factor in constructing a graph involves units of measurement. You might use a Celsius thermometer for one part of your experiment and a Fahrenheit thermometer for another.

You must first convert your temperature readings to the same unit of measurement before you make your graph.

Communicating with Graphs

1.3

Constructing Line Graphs

Scientists use a variety of tools, such as computers and graphing calculators to help them draw graphs.

Communicating with Graphs

1.3

Bar Graphs

A bar graph is useful for comparing information collected by counting. For example, suppose you counted the number of students in every classroom in your school on a particular day and organized your data in a table.

Communicating with Graphs

1.3

Bar Graphs

You could show these data in a bar graph like the one shown.

Communicating with Graphs

1.3

Bar Graphs

As on a line graph, the independent variable is plotted on the x-axis and the dependent variable is plotted on the y-axis.

Communicating with Graphs

1.3

Bar Graphs

You might need to place a break in the scale of the graph to better illustrate your results.

Communicating with Graphs

1.3

Circle Graphs

A circle graph, or pie graph, is used to show how some fixed quantity is broken down into parts. This type of graph used to show how a part of something relates to the whole. (Test) The slices represent the parts and usually are represented as percentages of the total.

Communicating with Graphs

1.3

Circle Graphs

This figure illustrates how a circle graph could be used to show the percentage of buildings in a neighborhood using each of a variety of heating fuels.

Section Check

1.3

Question 1
A graph is a(n) __________ of information or data.

A. list B. analysis C. visual display D. conclusion

Section Check

1.3

Answer
The answer is C. Graphs make complex patterns easier to understand by displaying data in a visual manner.

Section Check

1.3

Question 2
Which of the following types of graphs would be the best choice for representing a childs growth over time? A. line B. bar C. circle D. contour

Section Check

1.3

Answer
The answer is A. Line graphs often show how a relationship between variables changes over time.

Section Check

1.3

Question 3
You need to draw a circle graph to represent the following data. Determine the angle on the circle that accurately represents the number of Spanish-speaking households.
Language Spoken English Spanish French Number of Households 127 179 21

Section Check

1.3

Answer
There are 327 households, 179 of which are Spanish-speaking. 179 is 55% of the total, so the angle will be 55% of 360, or 198.
Language Spoken English Spanish French Number of Households 127 179 21

Help

To advance to the next item or next page click on any of the following keys: mouse, space bar, enter, down or forward arrow.

Click on this icon to return to the table of contents


Click on this icon to return to the previous slide Click on this icon to move to the next slide Click on this icon to open the resources file. Click on this icon to go to the end of the presentation.

End of Chapter Summary File

Você também pode gostar