Escolar Documentos
Profissional Documentos
Cultura Documentos
Nova Geração
7.5G
240G
Tellabs 8609 80G
7.5G
ELC1
ELC1
Figura 1
Item Part number 8630 SUBRACK 8660 SUBRACK 8660 R2 SUBRACK Max
81.86S-8630-R6 81.86S8660SUBRA-R5 82.86S-8660-R6 numero
81.86S-8660-R6 de ELC1
1) Quatro cartões ELC1 no subrack Tellabs 8630 é suportado até +45°C se a altitude for menor que 1km. Se a altitude for maior que 1km, a
temperatura suportada é de +40°C.
2) CDC1 versões de 940W/1200W
3) Requer PIM
Sub-Slot
20
0
STM-1: SO slot/IFM/port
4/29/2014
GE: GE slot/IFM/port
14
CDC
13
Empty IFC Slot 12
Empty IFC Slot
CDC: MFE 14/0
11
Empty IFC Slot
Configurando interfaces no 8660
10
Empty IFC Slot 9
8660
8
Empty IFC Slot 7
Empty IFC Slot 6
Empty IFC Slot 5
Empty IFC Slot
Sub-Slot Sub-Slot
1 0
8630
Empty CDC Slot 1
8 x GE IFM 24 x E1 IFM 6
Empty IFC Slot 7
Empty IFC Slot 8
Empty IFC Slot 9
Interfaces: CDC 14
CDC: MFE slot/0
GE: GE slot/IFM/port
E1: PDH slot/IFM/port
Tellabs 8609
Max. E1/T1 32 16 16
10GE Future N/A N/A
Synchronization SCI, SCO, E1/T1, SCI, SCO, E1/T1, SCI, E1/T1, sync
sync Eth,1588v2 sync Eth,1588v2 Eth,1588v2
Circuit Breaker -48= 10 A / +24= 16 A -48 = 4 A / +24 = 10 A -48 = 3 A / +24 = 4 A
(disjuntor)
MFE (gerência) 2x MFE 2/0 , 2/1 N/A (utilizar FE) N/A (utilizar FE)
Full HW redundancy
Interfaces: 14
SCM: MFE slot2/0
GE: GE 2/Mod/port
E1: PDH 2/Mod/port
2 RU altura
Temperatura suportada (-40ºC to +65ºC) 3 HM module slots:
2 Switching & Control module slots: 4 x 100/1000 BASE-X
Proteção de switch fabric 4 x 10/100/1000BASE-TX
Proteção de control plane 1 x 10GE (XFP) *obrigatoriamente devem
ser instalados nos slots 5 e 6
Portas de gerência redundantes
4 LM module slots (Compatíveis com 8607
LM´s não são Hot-Swap, necessidade desligar and 8609): 8 x chE1/chT1 (multiservice) / 8 x
equipamento para manuseio.
10/100Base-TX
Interfaces fixas 8xGE SFP and 4xGE RJ45: Não possui interface de gerência, utilizar
qualquer interface fe/ge do equipamento
8xGE optical ports support 100BASE-FX, para as configs.
1000BASE-X and 1000BASE-T
LM´s não são Hot-Swap, necessidade desligar
4xGE support 10/100/1000BASE-TX equipamento para manuseio.
Interfaces: 14
GE: GE Mod/port
E1: PDH Mod/port
Acessar a interface
Ex: Interface gigabit slot 4, módulo 0, port 1
Interface ge4/0/1
- Telnet:
• cli-server telnet enable
- FTP
• ftp-server enable
clock set as-utc 19:50:00 28 Apr 2014 (sempre 3 horas a mais do horário atual
exemplo: 16:50)
no terminal more
show run
show tech