Escolar Documentos
Profissional Documentos
Cultura Documentos
www.huawei.com
O RTN 900 V1R2 possui dois modelos RTN 950 e RTN 910..
O RTN 900 V1R2 suporta serviços TDM e também quadros hibirdos.
E1
E1
E1
E1
E1
E1
E1 E1
E1
FE E1
FE
E1
E1
STM-1/E1
Regional Backhaul
E1
Network
FE/GE
GE
E1
FE
E1
Serviços E1 Acesso.
unit STM-1Acesso..
Serviços Provê as cross e switch
switching
unit
IF unit Mapeamentoi e sinais de FI.
Interface Acesso E1
Serviço Acesso STM-1
unit Acesso Ethernet
Timeslot Provide cross-conection TDM
cross- services.
connect
unit
Switchin Serviços Ethernet Processos.
g
pacotes
unit
IF unit Mapeamentos de serviços.
SDH/PDH Microondas
Hybrid Microondas
SDH/PDH Microondas
Hybrid Microondas
Plataforma universal:
Dois tipos de cabinetes: IDU 910 (1U) and IDU 950 (2U)
As IDUs 910 e 950 supportam as mesmas placas de FI.
Switching IDU 910 e IDU 950:
Switching da IDU 910 :4.2G,CSHA/CSHB/CSHC;
Switching da IDU 950 :10G,CSH;
Cross-Connection da IDU 910: 8×8个VC-4,CSTA;
Cross-Connect da IDU 910: 32×32个VC-4,CSTA;
As placas de power são as mesmas da versão V1R1.
Power(1+1)
Paires slots
• Placas
Placas Controladora e Croos Conexões
CSTA
CST
Placas Hibrida cross conexões.
Placas de FI.
Placas de Serviço.
Placas Auxiliares e Interfaces de Controle.
Power supply e FAN.
A CSTA cross conexões. Em geral a CSTA prove serviços PDH/SDH e auxiliares. Suporta
serviços VC-12, VC-3, ou VC-4 level 8x8 VC-4s.
Prove 2 STM-1 16 E1.
Prove 1 Ethernet NM interface e NM serial interface.
Prove 1 NE cascade interface.
Suporta 1 input 1 output external clock. / Bypass E1 service interface.
Prove 1 asynchronous / synchronous data interface.
Prove 1 Orderwire interface.
Sincronismo
NM Serial
E1 (1-16)
STM-1 optical interface
interfaces
Alarme
input/output
interface
Button Description
CF RCV button Usado para restaurar o CF card.
Usado para perfomrance e reset
RST button
do equipamento.
TDM services. Supports VC-12, VC-3, ou VC-4 level, matriz de 32x32 VC-4s.
Note:
Indicador NM cascata
es Button interface
NM interface
The second time interface
Note:
• Placas
Hybrid system control, cross-connect, and timing board
CSHA/CSHB/CSHC
CSH
Placas Hibrida cross conexões.
Placas de FI.
Placas de Serviço.
Placas Auxiliares e Interfaces de Controle.
Power supply e FAN.
Synchronous/ Alarm
NM interface/NM E1 (1-16) interface
Asynchronous input/output
serial interface
data interface interface
LOS 1 On (red) The first optical interface on the line reports the
R_LOS alarm.
Off The first optical interface on the line does not report
the R_LOS alarm.
LOS 2 On (red) The second optical interface on the line reports the
R_LOS alarm.
Off The second optical interface on the line does not
report the R_LOS alarm.
As placas CST podem ser inseridas nos slots 7 e 8 nos chassis RTN 950.
As placas CST board não pode ser instalada IDU 910 chassis.
NM NE cascade
interface/NM interface
serial interface
CF RCV button: used to restore the configuration data from the CF card. After you press the CF RCV button
for 5 seconds, the equipment automatically restores the configuration data from the CF card.
RST button: used for warm reset on the board. When you press the RST button and then release it, a warm
reset is performed on the board.
• Placas
Placa de FI
IF1
IFU2
IFX2
Placas Hibrida cross conexões.
Placas de FI.
Placas de Serviço.
Placas Auxiliares e Interfaces de Controle.
Power supply e FAN.
IDU 910:
A placa IF1slot 3 ou slot 4.
On (green) The services are working normally and no service alarm occurs.
SRV
On (red) A critical or major alarm occurs in the services.
indicator
On (yellow) A minor or remote alarm occurs in the services.
On (green) The ODU is working normally.
On (red) The ODU has a critical or major alarm or has no power supply.
ODU
On (yellow) The ODU has a minor alarm.
indicator
On for 300 ms
(yellow) and off for The receive power of the ODU is lower than the required value.
300 ms repeatedly
IDU 910:
A placa IFU2 pode ser inseridas
nos slots 3 e 4.
IDU 910
IDU 950:
A placa pode ser inserida nos
slots 1 a 6.
Para a configuração 1+1 FD/SD
devera ser inserida nos slots
pares.
Pares de slots(slot 1, slot 2),
(slot 3, slot 5), and (slot 4, slot 6).
Slot allocation prioridade: Slots 3
and 5 > slots 4 and 6 > slots 1 IDU 950
and 2
1
The ODU-PWR switch is equipped
with a lockup device. To turn on or
turn off the switch, you need to first
pull the switch lever outwards slightly.
2
When the ODU switch is set to “I”, do
not insert or remove the IF cable.
Item Performance
Transmit frequency (MHz) 350
Impedance (ohm) 50
• Placas
TDM system control, cross-connect, and timing board
Hybrid system control, cross-connect, and timing board
CSHA/CSHB/CSHC
CSH
IF board
IF1
IFU2
IFX2
Interface de Serviço.
EM6T/EM6F
SL1D
SP3S/SP3D
Auxiliary e gerencia
AUX
Power supply
IDU 910:
A placa EM6T/EM6F pode ser
instalada nos slots 3 e 4.
IDU 910
IDU 950:
A EM6T/EM6F placa pode ser
inserida nos slots 1 a 6.
Prioridade de slots: Slots 4 and
6 > slots 1 and 2 > slots 3 and 5
IDU 950
GE
FE interfaces-
Indicators interfaces- GE
RJ45 interfaces-LC RJ45
IDU 910:
A placa SL1D pode ser
inserida nos slots 3 e 4.
IDU 910
IDU 950:
A placa SL1D slots 1 to 6.
Prioridades:Slots 4 and 6 >
slots 1 and 2 > slots 3 and 5.
IDU 950
Indicators: STM-
Working status indicator (STAT) – two
colors (red and green) 1interface-LC
Status indicator (SRV) – three colors
(red, green, and yellow)
LOS1/LOS2: Whether the optical
interface have the R_LOS alarm.
A 120
B 75
IDU 910:
A SP3S/SP3D placa pode ser
inserida nos slots 3 e 4.
IDU 910
IDU 950:
A placa SP3S/SP3D pode ser
inseridas nos slots 1 e 6.
Prioridade de slots: Slots 4 and
6 > slots 1 and 2 > slots 3 and 5.
IDU 950
Indicators:
Working status indicator (STAT) – two E1 interface
colors (red and green)
Status indicator (SRV) – three colors
(red, green, and yellow)
NOTE:
In the case of the OptiX RTN 900, only the ports 1-16 and 22-37 of the SP3D interface are
used. Ports 1-16 correspond to E1 signals 1-16 and ports 22-37 correspond to E1 signals 17-32.
A AUX
A AUX prove multiples serviços:
Prove 1 orderwire interface.
Prove 1 64 kbit/s synchronous transparent data interface.
Suporta 1 19.2 kbit/s asynchronous transparent data interface.
Suporta o input de 4 canais de alarms.
Suporta o output de dois chanais de external alarms.
Suporta hot swapping.
Indicators:
Working status indicator (STAT) – two
Alarm input
colors (red and green)
Status indicator (SRV) – three colors
(red, green, and yellow)
说明:
The OptiX RTN equipment also supports the orderwire group call function. For example, when an OptiX RTN
equipment calls the number of 888, the orderwire group call number, all the OptiX RTN equipment orderwire phones
in the orderwire subnet ring until a phone is answered. Then, a point-to-point orderwire phone call is established.
IDU 950
CSH
IF board
IF1
IFU2
IFX2
Interface de Serviço.
EM6T/EM6F
SL1D
SP3S/SP3D
Auxiliary e gerencia
AUX
Functional
Board Description Valid Slot
Version
IDU 910:
TNC1
IDU 950:
TND1
BGND power
input interface When the PWRA
and PWRB
indicators are on BGND power
and green, it input interface
indicates that the
power is
accessed.
–48 V power
–48 V power input interface
input interface
One PIU board whose functional version is TNC1 One PIU board whose functional version is TND1 accesses one –48 V
accesses two –48 V DC (or -60 V DC) power DC (or –60 V DC) power supply for the equipment. The PIU boards
supplies for the equipment. The two power that have the functional version of TND1 are fixedly inserted in slot 9
supplies function as a hot backup for each other.
and slot 10. The two PIU boards function as a hot backup for each
other.
Functional
Board Description Valid Slot
Version
FAN TNC1 Fan of the OptiX RTN 910 Slot 5 in the IDU 910
FAN TND1 Fan of the OptiX RTN 950 Slot 9 and slot 10 in the IDU 950
MAJ indicator
Orange The subrack has a major alarm.
MIN alarm
Yellow The subrack has a minor alarm.