Escolar Documentos
Profissional Documentos
Cultura Documentos
Mapa de Registradores SPS - 3.00-pt
Mapa de Registradores SPS - 3.00-pt
SÍNCRONO
SPS
PARA TRANSFORMADORES MONOFÁSICOS OU TRIFÁSICOS
Mapas de Registradores
Índice
Título Página
Protocolo Modbus RTU 2
Protocolo DNP 3.0 8
Bit Faixa de
Regis-
(0=LSB, Descrição Medição ou Passo
trador
7=MSB) Estado
+1 - Modo de Operação (MOD, vide sub-capítulo 9.1.1) 0...2 1
+2 - Número de taps (TAP, vide sub-capítulo 9.1.4) 2...50 1
+3 - Tipo de Indicação de Tap (IDC, vide sub-capítulo 9.1.5) 0...4 1
+4 - Posição do tap neutro (CNT, vide sub-capítulo 9.1.6) 2...50 1
RES:
47...200
(corresponde a
4,7...20,0 ohm)
Resistência por passo (RES (SPS) / FSR (SPS-I), vide FSR
+5 - 1
sub-capítulo 9.1.7) 01 - 0...1 mA
02 - 0...5 mA
03 - 0...10 mA
04 - 0...20 mA
05 - 4...20 mA
+6 - Tempo para Sincronismo (SNC, vide sub-capítulo 9.1.8) 1...100 1
+7 - Tempo para alarme E04(PRG, vide sub-capítulo 9.1.9) 1...25 1
+8 - Função do relé 1 (RL1, vide sub-capítulo 9.1.10) 0...34 1
+9 - Função do relé 2 (RL2, vide sub-capítulo 9.1.11) 0...34 1
+10 - Função do relé 3 (RL3, vide sub-capítulo 9.1.12) 0...34 1
+11 - Função do relé 4 (RL4, vide sub-capítulo 9.1.13) 0...34 1
+12 - Opção de saída mA (OCS, vide sub-capítulo 9.1.14) 0...9 1
+13 - Opção de idioma (LNG, vide sub-capítulo 9.1.15) 1...3 1
+14 Uso Interno
+15 Uso Interno
+16 Uso Interno
+17 Uso Interno
+18 Uso Interno
+19 Uso Interno
0=inativo
+20 0 Comando Subir -
1=pulso subir
This document is accompanied by table 1, Supported DNP 3.0 Objects, Function Codes, and
Qualifiers, and table 2, Point List.
Notable Objects, functions, and/or qualifiers supported in addition to highest DNP Levels Supported:
Reads of Binary Inputs (Object 01, Variation 02, Qualifier 00, 01 and 06)
Reads of 16-bit Analog Inputs (Object 30, Variation 02, Qualifier 00, 01 and 06)
GENERAL INFORMATION:
Maximum Data Link Frame Size (octets): Maximum Application Frame Size (octets):
None None
Fixed at ___ Configurable, range ___ to ___
Configurable, range 0 to 255 (Fixed is not permitted)
Never
Always
Sometimes If Sometimes, when? ______________________________
Configurable as: __________________________________________
Never
Always (Not recommended)
When reporting Event Data (Slave devices only)
When sending mult-fragment responses (Slave devices only)
Sometimes: If ‘Sometimes’, when? __________________________________________
Configurable: If ‘Configurable’, how? _________________________________________
YES
NO
Never
Fixed at ______ seconds
Configurable, range ______ to _______ seconds
Only at IED startup
The maximum number of objects supported in a single control request for objects 12 and 41.
Control Points per address: Do all indices support the same control codes:
Never Never
Configurable (attach explanation) When Device Restarts
Only certain objects When Status Flags Change
Sometimes (attach explanation)
*No other options permitted.
ENABLE/DISABLE Unsolicited: Minimum number of events and/or minimum time
before transmission of an unsolicited message.
Not Supported
Configurable # of events:__________
Function codes 20,21 supported min. amount of time(msec) :___________
Assign Class Function code supported: Is the Event Buffer size configurable:
Are the updated ENABLE/DISABLE unsolicited Are the updated Assign Class settings saved
settings saved through a device reset: through a device reset:
YES YES
NO NO
Never
Always (attach explanation)
Configurable (attach explanation)
Not Supported
Configurable (attach explanation)
REQUESTS RESPONSES
OBJECTS
(slave will parse) (master must parse)
Function Qualifier Function Qualifier
Object Variation Description
Codes Codes(hex) Codes Codes(hex)
01 02 Binary Input with Status 01 06 00, 129 00, 01
10 02 Binary Output with Status 01, 02 06 00, 129 00, 01
12 01 Control Relay Output Block 05, 06 17, 28 00, 129 Echo
30 02 16 bit Analog Input with flag 01 06 00, 129 00, 01
40 02 16 bit Analog Output Status 01 06 00, 129 00, 01
41 02 16-bit Analog Output Block 05, 06 17, 28 00, 129 Echo
50 - Read / Write Date & Time 01, 02 - 129 -
60 01 Class 0 Data 01 06 129 00, 01
60 02 Class 1 Data 01 06 129 00, 01
60 03 Class 2 Data 01 06 129 00, 01
60 04 Class 3 Data 01 06 129 00, 01
80 01 Internal Indications 02 00, index=7 129 -
- - Cold Restart 13 - 129 -
Configurações Adicionais:
Velocidade: 9600 bps
Stop Bits: 2
Paridade: Nenhuma
Nota: O SPS / PI aceita comandos via protocolo Modbus ou DNP mesmo se configurado para comando
local.