Escolar Documentos
Profissional Documentos
Cultura Documentos
Cat Villares Oleo Gas
Cat Villares Oleo Gas
SEGMENTO DE LEO E GS
STEELS AND ALLOYS FOR THE OIL
AND GAS SECTOR
ASTM
VM40
UNS
AISI
F11
ASTM A182
GRADE F11
(MOD.)
F22
ASTM A182
GRADE F22
(MOD.)
4340
K11597
K11572
K21590
UNS
DIN / Wnr.
Dimensions
VRC625
ASTM
B446
UNS
N06625
DIN 17744
Wnr. 2.4856
5.00 - 205.00
VATX750
ASTM
B637
N07750
Wnr. 2.4669
5.00 - 300.00
VAT80A
ASTM
B637
N07080
DIN 17742
Wnr. 2.4925
5.00 - 205.00
N07090
Wnr. 2.499
Wnr 2.4632
5.00 - 205.00
Wnr. 1.4980
5.00 - 490.00
Others
SAE 4340 /
AMS 6414
ASME SA387
Gr. 11
ASME SA387
Gr. 22
Dimenses
ASTM
Outros
VAT90
VAT286A
ASTM
A660
VB30
8630
SAE 8630
VAT617
ASTM
B166
N06617
Wnr. 24663a
5.00 - 205.00
Wnr. 2.4668
5.00 - 205.00
4130
ASTM
B637
N07718
SAE 4130 /
VGS 5.11.1
REV. 6
VAT718A
VL30
DIN 1715
Wnr. 1.3912
5.00 - 300.00
VEC 36
VL40
4140
AMS 6349
VAT800HT
ASTM
B408
N08811
Wnr. 1.4876
1.4959
5.00 - 345.00
VM30
4330
EN 30B /
AMS 6411
VRC400
ASTM
B164
B564
N04400
Wnr. 2.4360
5.00 - 300.00
VRC825
ASTM
B425
N08825
Wnr. 2.4858
5.00 - 345.00
ASTM
DIN
Wnr.
Outros
Dimenses
Dimensions
Others
AMS
5643
V630
ASTM - A564
(630)
17-4 PH
1.4542
ASTM
ASTM - A564
(631) 17-7 PH
1.4568
N4540
ASTM - A564
(XM-12) 15-5 PH
1.4540
AMS
5659
ASTM - A564
(XM-13)
PH 13-8 Mo
1.4534
AMS
5629
UNS
Dimenses
Condies de
Fornecimento
Wnr. / DIN
Dimensions
Wnr. 1.4460
DIN X3CrNiMoNbN
12.70 - 350.00
Wnr. 1.4462
DIN 2CrNiMoN
12.70 - 350.00
NORSOK MDS
D47
upon consultation
Supplying Conditions
5.00 - 400.00
N4460
ASTM A 182
UNS
Gr F50 /
S32900
ASTM A276
5.00 - 500.00
N4462
ASTM A 182
Gr F51 /
ASTM A276
VF53
ASTM A 182
UNS
Wnr. 1.4410
Gr F53 /
S32750 DIN X2CrNiMoN25-7-4
ASTM A276
12.70 - 350.00
NORSOK MDS
D57
upon consultation
N4501
ASTM A 182
Gr F55 /
ASTM A276
Wnr. 1.4501
DIN
X2CrNiMoCuWN25-7-4
12.70 - 350.00
NORSOK MDS
D57
under consult
N4507
ASTM A 182
UNS
Gr F61 /
S32550
ASTM A276
Wnr. 1.4507
DIN
X2CrNiMoCuN25-6-3
12.70 - 350.00
NORSOK MDS
D57
upon consultation
AMS
5622
V631
N4534
5.00 - 360.00
5.00 - 500.00
5.00 - 400.00
5.00 - 500.00
5.00 - 350.00
UNS
S31803
UNS
S32760
A linha de produtos da Villares Metals atende s normas de acordo com API 6A.
Condies diferenciadas sob consulta.
Villares Metals product line meets the API 6A standards.
Special requirements upon consultation.
ASTM
UNS
Outros
AISI
DIN / Wnr.
Others
N4313
ASMT A182
Gr F6NM
S41500
Wnr. 1.4313
DIN X3CrNiMo13-4
VC140
S41000
410
Wnr. 1.4006
DIN X12Cr13
NBR 5601
SAE 51410
NBR 5601
Type 420
NBR 5601
AMS 5610L
Type II
VC150
S42000
420
Wnr. 1.4021
DIN X20Cr13
V416
S41600
416
Wnr. 1.4005
DIN X12CrS13
Dimenses
Relao de Equipamentos
Equipamentos
Peso mx. t
Caractersticas Bsicas
Qtde.
Equipment
Maximum
Weight t
Basic Characteristics
Qty.
Torno Innobra 2 e 3
(CNC)
10
10
25
mx. 3400mm
Altura mx.: 1700mm
25
mx. 3400mm
Max height.: 1700mm
ASTM
UNS
AISI
DIN / Wnr.
Dimensions
V304UF
S30400
304
Wnr. 1.4301
DIN X5CrNi18-10
5.00 - 762.00
V304XLUF
S30403
304L
Wnr. 1.4307
DIN X2CrNi18-9
5.00 - 762.00
V316UF
S31600
316
Wnr. 1.4401
DIN X5CrNiMo17-12-2
5.00 - 762.00
40
mx. 1500mm
Comprimento mx.: 8000mm
40
mx. 1500mm
Max length: 8000mm
V316XLUF
S31600
316L
Wnr. 1.4404
DIN X2CrNiMo17-12-2
5.00 - 762.00
40
mx. 2030mm
Comprimento mx: 8000mm
40
mx. 2030mm
Max length: 8000mm
V317L
S31703
317L
Wnr. 1.4449
DIN X3CrNiMo18-12-3
5.00 - 762.00
40
40
V321
S32100
321
Wnr. 1.4541
DIN X6CrNiTi18-10
5.00 - 654.00
20
Promatek / Rocco
Trepanning Machine
20
V347SI
347
5.00 - 762.00
mx. 1800mm
Boring max.: 505mm
Max length.(boring): 14000mm
Wnr. 1.4543
DIN X6CrNiTi18-10
mx. 1800mm
Furao mx.: 505mm
Comprimento mx. (furao): 14000mm
Trepanadora
Promatek / Rocco
Trepanadora Echea
mx. 500mm
Furao mx.: 1655mm
Comprimento mx. (furao): 6500mm
Echea 4 Trepanning
Machine
mx. 500mm
Max boring: 1655mm
Max length (boring): 6500mm
Fresadora WMW
(CNC)
20
20
Peso mx . plataforma: 50 t
Peso mx. mesa mvel: 12,5 t
Curso longitudinal: 5500mm
Curso transversal: 500mm
Altura mx.: 2700mm
S34700
Dimenses
ASTM
UNS
AMS
MIL
Dimensions
VART250
(MARAGING 250)
ASTM A579
GR. 72
UNS
K92890
AMS
6512
MIL-S-46850D
5.00 - 350.00
VART300
(MARAGING 300)
ASTM A579
GR. 73
UNS
K93120
AMS
6514
MIL-S-46850D
5.00 - 350.00
VXM19
ASTM A276/
ASTM A479
Gr XM19
S20910
AMS
6514
MIL-S-46850D
5.00 - 152.40
A linha de produtos da Villares Metals atende s normas de acordo com API 6A.
Condies diferenciadas sob consulta.
Villares Metals product line meets the API 6A standards.
Special requirements upon consultation.
Mandrilhadora 125
Mandrilhadora 160
Broaching Machine
125
Broaching Machine
160
Produto
Product
Forma
Shape
Dimenses e Peso
Dimensions and Weight
D = 127 a 1,420mm
L 14,000mm (torneado / turned)
D = 142 a 1,480mm
L 18,000mm (bruto de forja / as forged)
Peso (Weight) 24,000 kg
Barras Redondas
Round Bars
Tolerncias (mm)
(Peas Desbastadas)
Tolerances (mm)
(Rough Machined)
T = 130 a 1,250mm
L 12,000mm
(usinado / machined)
Peso (Weight) 22,500 kg
Barras Quadradas
Square Bars
Barras Chatas
Flat Bars
T = 130 a 1,250mm
W = 130 a 2,300mm
L 12,000mm
(usinado / rmachined) (*)
Peso (Weight) 22,500 kg
T
L
Barras Trepanadas
Hollow Bars
Di
D = 203 a 1,300mm
Di = 65 a 505
T 50mm
L 14,000mm
Peso (Weight) 23,000 kg
T => +3/-0
L => +10/-0
T => +3/-0
W => +3/-0
L => +10/-0
Discos
Disks
(H < D)
D = 450 a 2,340mm
H = 130 a 1,420mm
Peso (Weight) 22,500 kg
D => +3/-0
H => +10/-0
Forma
Shape
Dimenses e Peso
Dimensions and Weight
Tolerncias (mm)
(Peas Desbastadas)
Tolerances (mm)
(Rough Machined)
Limitaes
Limitations
Barras com dimetro superior a 650mm e comprimento superior a
7400mm somente podem ser fornecidas sem tratamento trmico (sob
consulta) ou com tratamento trmico de normalizao ou alvio de
tenses (comprimento mx. 12000). Para barras de dimetro at 215mm,
comprimento mximo de fornecimento 14000mm.
Anis
Rings
(H < D)
D
Bars with diameters larger than 650mm and length longer than 7,400
mm can only be supplied without heat treatment (upon consultation)
or normalized or stress relieved (length up to 12,000mm).
Bars with diameter up to 215mm can only be supplied with a length
up tto 14,000mm.
Barras com espessura superior a 650mm e comprimento superior a
7400mm somente podem ser fornecidas sem tratamento trmico (sob
consulta) ou com tratamento trmico
de normalizao ou alvio de tenses.
D = 450 a 3,000mm
Di 2,000
H = 130 a 1,420mm
Peso (Weight) 20,000 kg
Buchas
Sleeves
(L > D)
Di
D = 500 a 2,600mm
Di = 380 a 2,000
L 4,300mm
Peso (Weight) 20,000 kg
D => +3/-0
Di => +0/-3
H => +10/-0
D => +3/-0
Di => +0/-3
L => +10/-0
Bars with thickness larger than 650mm and length longer than 7,400
mm can only be supplied without heat treatment (upon consultation) or
normalized or stress relieved.
Barras com espessura ou largura superior a 650mm e comprimento
superior a 7400mm somente podem ser fornecidas sem tratamento
trmico (sob consulta) ou com tratamento trmico de normalizao ou
alvio de tenses.
(*) Barras com largura acima de 1250mm devem ter rea mxima
igual a de uma barra quadrada de 1250mm.
Bars with thickness or width larger than 650mm and length longer
than 7,400mm can only be supplied without heat treatment (upon
consultation) or normalized or stress relieved.
(*) Bars with width larger than 1,250mm must have a maximum area
equal to a square bar area of 1,250mm.
A dimenso dos furos depende das ferramentas disponveis e
das dimenses das peas, mas de forma geral pode variar de 65
a 505mm. Furos menores podem ser fornecidos, sob consulta,
comprando usinagem externa. Barras com dimetro superior a
650mm e comprimento superior a 7400mm somente podem ser
fornecidas sem tratamento trmico (sob consulta) ou com tratamento
trmico de normalizao ou alvio de tenses.
The dimension of the holes depends on the available tools and the
dimension of the parts, but, in general, it varies from 65 to 505mm.
Smaller holes can be supplied upon consultation, by subcontracting
other machine shops. Bars with diameter larger than 650mm and
length larger than 7,400mm can only be supplied without heat
treatment (upon consultation) or normalized or stress relieved.
Peas com dimetro entre 900 e 2340mm podem ser fornecidas com
altura inferior a 175mm ou superior a 1420mm, sob consulta. Peas
com dimetro superior a 1900mm somente podem ser fornecidas
sem tratamento (sob consulta) ou com tratamento trmico de
normalizao
Parts with diameter from 900 to 2,340mm can only be supplied
With a height smaller than 175mm and larger than 1,420mm, upon
consultation. Parts with diameter larger than 1,900mm can only be
supplied normalized.
Esboos Macios
Solid Blanks
L
Eixos Flangeados
Flanged Shafts
D = 400 a 1,600mm
D1 250mm
L 12,000mm
Peso (Weight) 20,000 kg
Di
Di
Esboos Furados
Hollow Blanks
D = 127 a 1,600mm
L 12,000mm
Peso (Weight) 22,000 kg
D = 127 a 1,600mm
Di = 65 a 505mm
L 14,000mm
Peso (Weight) 20,000 kg
D => +3/-0
L => +10/-0
D => +3/-0
L => +10/-0
D => +3/-0
Di => +/-1,5
L => +10/-0
Limitaes
Restrictions
Soma de dimetro interno e espessura deve ser 2200mm.
Peas com dimetro superior a 1900mm somente podem ser
fornecidas sem tratamento (sob consulta) ou com tratamento trmico
de normalizao. Peas com dimetro superior a 2000mm somente
podem ser fornecidas com altura superior a 200mm.
Sum of inner diameter and thickness must be = 2,200mm.
Parts with external diameter larger than 1,900mm can only be supplied
without heat treatment (upon consultation) or normalized.
Parts with external diameter larger than 2,000mm can only be supplied
with inner diameter larger than 200mm.
Soma de dimetro interno e espessura deve ser 2200mm.
Peas com dimetro interno maior que 650mm somente podem ser
fornecidas com comprimento mximo de 2500mm.
Peas com comprimento maior que 2000mm somente podem ser
fornecidos com dimetro interno com acabamento bruto (sob consulta).
Sum of inner diameter plus thickness must be = 2,200mm.
Parts with inner diameter larger than 650mm can only be supplied with
length up to 2,500mm. Parts with length larger than 2,000mm can only
be supplied with inner diameter in the as forged condition
(upon consultation).
Peas com dimetro superior a 650mm e comprimento superior a
7400mm somente podem ser fornecidas sem tratamento trmico (sob
consulta) ou com tratamento trmico de normalizao.
Parts with diameter larger than 650mm and length larger than 7,400mm
can only be supplied without heat treatment (upon consultation)
or normalized.
Peas com dimetro superior a 650mm e comprimento superior a
7400mm somente podem ser fornecidas sem tratamento trmico
(sob consulta) ou com tratamento trmico de normalizao.
Parts with diameter larger than 650mm and length larger than 7,400mm
can only be supplied without heat treatment (upon consultation) or
normalized.
Soma de dimetro interno e espessura deve ser 2200mm.
Peas com dimetro superior a 1900mm somente podem ser
fornecidas sem tratamento (sob consulta) ou com tratamento trmico
de normalizao. Peas com dimetro superior a 2000mm somente
podem ser fornecidas com altura superior a 200mm.
Sum of inner diameter and thickness must be = 2,200mm.
Parts with external diameter larger than 1,900mm can only be supplied
without heat treatment (upon consultation) or normalized.
Parts with external diameter larger than 2,000mm can only be supplied
with height about 200mm.
Peas esboadas com acabamento bruto e sem tratamento trmico podem ser fornecidas, sob consulta, com peso mximo at 28000 kg e comprimento
de at 18000mm, dependendo da combinao entre dimenses e comprimentos. Os dados constantes nesta tabela so orientativos. As dimenses podem
variar em funo das combinaes entre tipo de ao, perfil e tratamento trmico.
Solid blanks in the as forged condition and without heat treatment can be supplied upon consultation, up to 32,000 kg and length up to 18,000mm, depending on
the relation between sections and lengths. The data in this table are only for guidance. The dimensions can vary as a function of the combinations between grade,
shape and heat treatment.
Componentes Estruturais.
AD 2000/WO/TRD100 - Aplicao de partes pressurizadas.
Componentes de vasos de presso.
Application.
AD 2000/WO/TRD100 - Pressurized parts application. Pressure vessel
components.
Components.
No-Destrutivos.
NORSOK - M650 - Aplicao leo e Gs.
Villares Metals Distribution Center and Services, the largest tool steel distributor in
Latin America, complements its line of products with steels and alloys for special
applications, focusing on sectors such as oil and gas, chemical and petrochemical
and energy generation, as shown in the examples below:
Nicke base alloys: Inconel 625 and 718
Stainless steels: Duplex and Super Duplex
Precipitation hardening steels, PH: 17-4PH, 15-5PH, 13-8PH
Engineering Steels:
SAE 8630 (VB30PET)
SAE 4130 (VL30CAFO)
SAE 4140 (VL40CFO)
SAE 4340 (VM40FO)
Villares Metals has implemented a stock program in its local warehouse to
improve competitiveness and lead time of the Brazilian supply chain with focus on:
Alloy 625 and 718
Duplex and Super Duplex
PH-Grades: 17-4PH, 15-5PH, 13-8PH
Engineering Steels:
SAE 8630 (VB30PET)
SAE 4130 (VL30CAFO)
SAE 4140 (VL40CFO)
SAE 4340 (VM40FO)
Stock can be made available for Export Markets.
Tratamento Trmico
Heat Treatment
O Centro de Servios de Tratamento Trmico Villares Metals oferece solues completas em Tratamento Trmico. Dispe de equipamentos de
ltima gerao e alta tecnologia, aliados a um eficiente sistema automatizado de controle, garantindo a perfeita realizao dos diversos ciclos
trmicos. A seleo correta do ao e seu perfeito tratamento trmico so requisitos para o mximo rendimento das ferramentas. Para maior
comodidade e garantia superior do ferramental, nossos clientes podem contar com Ao e Tratamento Trmico do mesmo fornecedor.
Conhea os servios oferecidos:
The Villares Metals Heat Treatment Service Center offers complete solutions in Heat Treatment. It has last generation and high technology equipment,
coupled with an efficient automatic control system, ensuring a perfect execution of the different thermal cycles. The correct selection of steel grade and
its ideal heat treatment are required for maximum tool yield. For your convenience and greater tooling performance, our customers can count on Steel
Grade and Heat Treatment from the same supplier.
Servios Bsicos
Servios Adicionais
Basic Services
Additional Services
Revenimento a vcuo
Anlises metalogrficas
Vacuum tempering
Metallographic analyses
Recozimento
Annealing
Solubilizao a vcuo
Envelhecimento
Ageing
Sub-zero
Sub-zero
Alvio de tenses
Stress relieving
Nitretao a plasma
Plasma nitriding
Junho/2012
0800 19 0577
0800 707 0577
55 19 3303.8149
edilson.rocha@villaresmetals.com.br
cac@villaresmetals.com.br
www.villaresmetals.com.br
Rua Alfredo Dumont Villares, 155
Jardim Santa Carolina - Sumar/SP
CEP 13178-902