Escolar Documentos
Profissional Documentos
Cultura Documentos
components101.com/switches/spst-rocker-switch-non-illuminated
1/3
Características e especificações elétricas
Interruptores
Tipo de snap-in
A série SDDJE é fornecida nas configurações SPST (Single Pole Single Throw) e
DPST (Double Throw Single Pole)
SDDJE11200 é um interruptor basculante SPST ON-OFF com marcação IO.
Faixa de temperatura operacional –10 ° C a +55 ° C
Resistência de contato 100mΩ máx.
Resistência de isolamento 500MΩ min. 500V DC
2.000V CA à prova de tensão por 1 minuto
Vida operacional 10.000 motos
Força do atuador - Direção operacional 25N
Força do atuador - Direção perpendicular 25N
Below image shows without and with the standard markings made on Rocker Switches.
The SPST switch has one input terminal and an output terminal. The input battery source
is given at the input or I terminal of the switch. LED is connected to the output or the O
side terminal of the switch as seen in the figure. When the Rocker switch is pressed
2/3
down the input terminal is connected to the output terminal and the LED glows.When
the switch is again pressed down at the end of O terminal, the LED turns OFF.
Applications
Small appliances
As AC and DC power ON-OFF switches
Computadores e periféricos
Instrumentação médica
Modelo 2D
3/3