Escolar Documentos
Profissional Documentos
Cultura Documentos
Parâmetro
Local: Angola, Kwanza (12° Sul; 17° Este) Água, temperatura: 25 °C
Rendimento diário 5 500 m³; Dimensionamento para Perda por sujidade: 5,0 % Cabo do motor: 50 m
necessário: média mês
Tipo de tubagem: plástico Nível de água 65 m Comprimento da tubulação: 300 m
estático:
Quantida
Produtos de Detalhes
PSk2-100 C-SJ150-7-2 1 pç. Sistema de bombagem submersível com controlador com DataModule, motor e extremidade de
bomba
LC330-P72 600 pç. 198 000 Wp; 20 x 30 módulos; 15 ° inclinado
Cabo do motor 50 m 35 mm² Cabo trifásico para a corrente e cabo monofásico para o aterramento
Tubagem 300 m 200 mm (diâmetro interno) Tubagem
Acessórios 1 conjunto Well Probe V2, SmartStart, PV Disconnect 1000-300-30, Surge Protector2, SmartPSUk2-100
Saída [m³]
Energia [kWh] 848 893 886 1 005 1 195 1 230 1 240 1 170 1 060 908 853 799 1 010
Irradiação [kWh/m²] 4,8 5,1 5,1 5,8 7,0 7,1 7,1 6,8 6,2 5,3 4,9 4,5 5,8
Chuva [mm] 7,0 6,3 7,1 3,7 0,47 0,033 0 0,13 1,0 3,3 6,5 7,5 3,6
Temp. ambiente [°C] 21 21 21 21 21 19 19 22 24 23 21 21 21
Val. horários 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00
Saída [m³/h]
Características do sistema
Esquema elétrico
System Layout
Traçado
H (Nível de água estático): Altura vertical desde o nível de água dinâmico até ao ponto de entrega mais elevado.
B (Descida no nível de Diferença de nível de agua subterranea, dependendo de recuperação do poço.
agua):
D (Diâmetro interior da
tubagem)
L (Comprimento da Tubagem completa da saída da bomba até ao ponto de entrega. Têm de ser adicionados cotovelos e guarnições
tubulação): de comprimento equivalente à tubagem.
M (Cabo do motor): Cabo entre o controlador e a unidade de bombagem.
T (Ângulo de inclinação): Ângulo entre o painel PV gerador e o painel horizontal.
Gama de sistemas
Nível max. 140 m
Taxa de fluxo max. 223 m³/h
Dados técnicos
Controlador PSk2-100
ƒHigh efficiency solar pump controller
ƒInputs for water meter, pressure sensors, digital switches
ƒSimple configuration with LORENTZ PumpScanner AndroidApp
ƒOnboard data logging and system monitoring
ƒInbuilt applications for constant pressure, constant flow and daily
amount
ƒIntegrated Sun Sensor
ƒActive temperature management
ƒIntegrated MPPT (Maximum Power Point Tracking)
Potência max. 90 kW
Tensão de entrada max. 850 V
Ótimo Vmp** > 575 V
Corrente do motor max. 160 A
Eficiência max. 98 %
Temp. ambiente -10...50 °C
Classe do invólucro IP54
Padrões
2006/42/EC, 2004/108/EC, 2006/95/EC
Os logótipos mostrados refletem as homologações concedidas a esta gama de produtos. Os produtos são encomendados e fornecidos com as homologações específicas
para poderem cumprir os requisitos do mercado em questão.
**Vmp: Tensão MPP em condições de teste padrão (STC): radiação solar de 1000 W/m², temperatura da célula de 25 °C
****Special solutions available for >30 °C, please consult your distributor
Dimensões e pesos
Controlador Unidade de
bombagem
H= 859 mm A= 4 810 mm
H1 = 800 mm B= 1 645 mm
H2 = 350 mm C= 3 165 mm
W1 = 610 mm D= 196 mm
W2 = 576 mm S= 6 in
D= 10 mm E= 230 mm
D1 = 402 mm
Peso líquido
Controlador 60 kg
Unidade de bombagem 287 kg
Motor 211 kg
Extremidade de bomba 76 kg
*Vmp: Tensão MPP em condições de teste padrão (STC): radiação solar de 1000 W/m², temperatura da célula de 25 °C
Order Information
Item no.: 19-000005 Product name: Well probe sensor V2
Features
Reliable dry run protection
Simple to install using 3 cable ties
Improved tolerance to dirt
Splicing kit and cable ties for fixing are included
Technical Data
Max. operating temperature 55°C
Enclosure class: IP68
Submersion depth: max 50 m (164 ft)
Cable length: 1.5 m
Wire size: 2 x 0.50 mm² or AWG 20, waterproofed
Must be mounted in a vertical position
Meets the requirements for CE
Dimensions / Weight
Packaging dimensions: 255 x 170 x 40 mm
10.0 x 6.7 x 1.6 in
Total weight: 0.1 kg / 0.2 lbs
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
SmartStart
Automatic Remote Diesel Generator Switching Device
Description
Max. switching capability: 250 V AC / The SmartStart comes with two cables, NP7-12 or a similar sealed 12 V lead-
30 V DC, 2 A one cable to be used with the PSk2 acid battery
Enclosure class: IP54 product line and one cable to be used Recommended minimum capacity: 7
Nominal cross section for remote start with the PSk3 product line. Each cable Ah
cable 1.5 mm² is ready to use and has a length of Max. dimensions without connector:
Further information is available in the 2 m. The required battery must be 151 x 70 x 95 mm (5.94 x 2.56 x 3.74
PSk2 and PSk3 manual on partnerNET ordered separately. The battery must in)
meet the requirements on the right. Max height with connector: 100 mm
(3.94 in)
Connector: 4.8 mm (0.189 in) faston
tabs
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
Mounting options Order information
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
PV Disconnect 1000-300-30 PV Disconnect 1000-300-30
30 string connection box with DC disconnect switch, string fuses
and surge protection device Compatibility
D
E
F
the PV array. A 1170 46.06
B 1137 44.76
The SPD will provide an increased Technical Data C 1100 43.31
level of protection from electrical D 556 21.89
surges (for example caused by indirect E 600 23.62
lightning strikes). For operation it Product name PV Disconnect 1000-300-30
F 650 25.59
D
E
F
requires a reliable ground connection. Built-in protection Surge protection device (SPD) and Fuses
G 230 9.06
Ambient temperature -30 °C to 50 °C [-22 °F to 120 °F]
Net weight 68 Kg 149.9 lbs
Max. Voltage 1000 V DC
Features Max. current per string 15 A
Max. total current 300 A
ʝ DC rated disconnect to provide Max. no. of strings 30
safe isolation of the system
Input cable size 4 - 10 mm² [AWG 12 - 8]
ʝ Simple and cost-effective unit to
2 x 70 mm2 [AWG 0/2] with lug M10
connect up to 30 module strings in Output cable size
Includes 3 m [9.8 ft] cable length
parallel
G
Ground cable size ≥ 16 mm² [AWG 6]
ʝ Built-in protection with Fuses and
Quantity of fuses 30
SPD.
Fuse current rating 15 A
ʝ Lockable to secure the system
during maintenance (power locked Fuse voltage rating 1000 V DC
off). Fuse Size 10 x 38 mm Order and Packaging information
PG glands (input) 60 x PG-9
G
ʝ Required for a professional
installation of solar pumping PG glands (output) 2 x PG-36 Item number 19-000113
systems PG gland GND 1 x PG-9 Product name PV Disconnect 1000-300-30
Enclosure class IP 54 Packed gross weight 94 kg [207.23 lbs]
V230725
Housing material Steel (powder coated) Packed volume 0.407 m3 [ 14.37 ft3]
Approvals and standards CE - EN 60204 Packaging dimensions [LxWxH] 1240 x 800 x 410 mm [48.82 x 31.50 x 16.14 in]
1 2
Surge Protector2
Device to Protect LORENTZ Pump Accessories from Voltage Spikes
ORDER INFORMATION
• Item no.: 19-005210 product name: Surge Protector2
FEATURES/COMPATIBILITY
• Reliable surge protection device for any switched, pulse or
analogue (4-20 mA) inputs sensors including:
o Well Probe Sensor 19-000000
o Water Sensor 19-000001
o Float Switch 19-000030
o Pressure Switch 19-000310
o Liquid Level (all types, e.g. 19-005040)
o Liquid Pressure Sensor (all types, e.g. 19-004460)
o Water Meter (all types, e.g. 19-002160)
o Sun Switch (19-000050)
• The device must be installed inside the PS2 or PSk2 controller.
TECHNICAL DATA
• Max. voltage: 30 V DC
• Max current 8/20µs: 500 A
• Enclosure class: IP20
• Ambient temperature: max. 80°C (176°F)
• Wire size: 2 x 1.5mm² (AWG 16)
• Meets the requirements for CE
DIMENSION/WEIGHT
• Packing dimensions: 56 x 26 x 120 mm
2.2 x 1.02 x 0.47 in
• Total weight 0.1 kg / 0.2 lbs
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
SmartPSUk2-100
AC/DC Converter to Supply PSk2 Pump Systems
with Power from a Generator or Grid Supply
Description Features
The SmartPSUk2-100 automatically blends power Provides DC power to PSk2 pump controllers
from solar and external sources, only using the ex- from AC and DC sources
ternal source where the demand for water requires Blends solar power (DC) with AC power from
it. This is not a switching system that switches the grid or generator
between sources but effectively blends power so
Part of the PSk2 SmartSolution for hybrid
that only the power that is needed is demanded
powering of water pumping systems
from the non-solar source. For a hybrid generator
solution, this means running at partial load, for a Data link to PSk2 controller for control and
hybrid grid solution this means using kWh from monitoring
the grid as a top up. Integrated overheat protection and active
cooling
SmartSolution OVERVIEW
PSk2 controller SmartPSUk2 SmartStart generator
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
Order information Mounting options
W2 W2 W1 W1 D1 D1
d d
H2
H2
H1
H1
H
H
H2
H2
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
LC330-P72
High-efficiency PV Module
Features
high energy yields ensured by high conversion
efficiency
sturdy, clear-anodized aluminum frame with
pre-drilled holes for quick installation
advanced EVA encapsulation with triple-layer
backsheet, meets the most stringent safety
requirements for high-voltage operation
pre-wired junction box equipped with connec-
tors ”plug‘n‘play“
Specifications
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
Electrical Performance
140 140
9 9
Current [A]
80 Voc 80
5 5 600 W/m2
50°C Pmax
4 4 60 60
3 3 400 W/m 2 Isc
75°C 40 40
Pmax
2 2
20 20
1 200 W/m
2
1
0 0 0 0
0 10 20 30 40 50 0 10 20 30 40 50 -25 0 +25 +50 +75 100 0 200 400 600 800 1000 1,200
Voltage [V] Voltage [V] Cell temperature [°C] Irradiance [W/m2]
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.