Escolar Documentos
Profissional Documentos
Cultura Documentos
Mopa PDF
Mopa PDF
06 SOBRE A MOPA
ABOUT MOPA
30 LEITO NAVAL
MARINE LADDER TRAY
08 ELETROFORT
14 ECOFORT
16 ELETROCALHA
42 RODAFLEX
STANDARD CABLE TRAY
STEEL PERIMETER TRUNKING
20 LEITOFORT 44 MOPOST
LEITOFORT LADDER TRAY POWER POLE TRUNKING
PERFORT
3
49 CAIXAS STD 59 CAIXAS STD P/ PISO EM PLACAS
FLOOR OUTLET BOX STD CAVITY FLOOR BOX STD
54 MOPADUTOS
UNDERFLOOR DUCTING
SISTEMAS PARA CONTRA PISO E PISO ELEVADO
Mopaduto
Neste Catlogo abordaremos os produtos da nossa Diviso de Canais para Fios e Caixas de Tomada Lume
Cabos composta por: Sistemas de Bandejamento, Sistemas Aparentes, Sistemas Caixas de Tomada STD
para Contrapiso e Piso Elevado, conforme descritos abaixo. Caixas de Passagem
Informaes complementares, novos lanamentos e demais linhas de produtos Caixas de Tomada Redonda
MOPA, esto disponveis em nosso site: www.mopa.com.br. Tomadas e Tampes
PRESENTATION FLOOR TRUNKING SYSTEMS
We introduce in this catalogue the products of our Cable Tray Systems Section composed by: Floor Trunking - Mopaduto
Cable Tray Systems, Floor Trunking Systems and Perimeter Trunking Systems. Floor Boxes - Lume and STD
Additional information, new releases and other lines of the MOPA products can be found on (with lid & trim assemblies )
our website: www.mopa.com.br.
Passage Floor Boxes
Grommets Floor Boxes
Sockets and Plugs
IN THIS BROCHURE:
In the market since 1954 with an updated industrial park located in a 45,000 sqm area, Mopa
works in the development of metallurgical products and it is leader in cable tray systems.
Along these years, Mopa has always launched innovative products that have become a market
reference. Pioneer in the use of Hot Dip pre-galvanized plate, the use of several technological
solutions, such as the process of cold joining of plates that does not cause damages to the
zinc coating and the development of mechanical steel sheet structure with a significant lower
weight of products and surpassing the required mechanical performance.
PERFORT
Matria Prima e Acabamento Raw Material and Finishing
Os materiais e acabamentos disponveis esto designados a seguir. As letras The raw materials and finishing available are discriminated below. The letters
indicadas entre parnteses so utilizadas para a identificao do acabamento e ou between brackets are used to identify the finishing and/or the material requested,
and they must be placed as the last digit in the code of product.
material solicitados, devendo ser colocadas como ltimo dgito do cdigo dos produtos.
(Z) - Chapa pr zincada fogo - Norma NBR 7008 (Z) - Hot Dip pre-galvanized plate - NBR 7008 - Rule
Ao SAE 1008/1010 (baixo teor de carbono) zincado pelo processo contnuo de SAE 1008/1010 Iron (low carbon content) zinc plated by continuous process of hot dip and
imerso a quente, onde o revestimento obtido atravs da imerso da tira de ao the coating is attained by immersing the steel strip in a bath of melted zinc at approximate-
num banho de zinco fundido aproximadamente 460C, com recursos para ob- ly 460C with resources to attain coating layers in previously specified and well-controlled
teno de camadas de revestimento em faixas previamente especificadas e bem strips. The systems are produced with an already galvanized plate. The systems are produ-
controladas. Os sistemas so produzidos com a chapa j galvanizada de usina, ao ced with already galvanized plate at the end of the Mopa productive process.
fim do processo produtivo Mopa, as peas esto prontas.
(G) - Galvalume - ASTM A792 Rule
(G) - Galvalume - Norma ASTM A792
Cold laminated carbon steel with an alloy composed by 55% aluminum, 43.5 zinc and 1.5%
Ao carbono laminado a frio revestido com liga composta de 55% de alumnio,
silicon which provides to the steel-base an exceptional protection by the aluminum barrier
43,5% de zinco e 1,5 % de silcio, que propicia ao ao base uma excepcional pro-
added to the galvanic protection of the zinc (excelent performance in protecting the edges
teo por barreira do alumnio conjugado a proteo galvnica do zinco (excelente
and discontinuities in the coating). A material that allies the structural resistance of the steel
perfornance na proteo de bordas e descontinuidades do revestimento). Um ma-
with the high protection to corrosion for the Al/Zn coating.
terial que alia a resistncia estrutural do ao com a elevada proteo corroso do
revestimento Al/Zn. (F) - Hot dip Galvanized Plate - NBR 6323 Rule
SAE 1008/1010 steel (low carbon content) steel wire by immersion in melted zinc. The pro-
(F) - Chapa Galvanizada fogo - Norma NBR 6323
cess is applied as the last step of the manufacturing processes.
7
Ao SAE 1008/1010 (baixo teor de carbono) zincado por imerso em zinco fundido.
Este processo aplicado aps os processos de manufatura, como ltimo estgio. (I) - Stainless Steel
(I) - Ao Inox We are able to offer stainless steel products - AISI 304, AISI 316, AISI 430 , and others upon
Poderemos fornecer produtos em ao inox - AISI 304, AISI 316, AISI 430 e outros request.
sob encomenda.
(A) - Aluminum alloy 1100 H14
(A) - Alumnio liga 1100 H14 Upon request, we are able to offer 5052 H34 NAVAL ALUMINUM alloy or other alloys.
Sob encomenda poderemos fornecer ALUMNIO NAVAL liga 5052 H34 ou outras ligas.
(P) - Electrostatic Painting
(P) - Pintura eletrosttica A modern top-coating process with powder paint that allies high protection with high level of
Moderno processo de revestimento com tinta a p, que alia alta proteo com finishing both with decorative and functional purposes. It can be applied over natural steel
alto nvel de acabamento, tanto para fins decorativos quanto para fins funcionais. with zinc and/or non-ferrous metal coating.
Pode ser aplicado sobre ao natural, revestido com zinco e ou metais no ferrosos. The environment where the product will be applied will determine the best type of powder
O ambiente onde o produto ser aplicado ir determinar o tipo mais indicado de p, that can be polyester, hybrid and/or epoxy.
que pode ser polister, hbrido e/ou epoxy.
(B) - Bi-chromated
(B) - Bicromatizado Electrochemical deposition process normally composed by a zinc layer and other layer of
Processo eletroqumico de deposio, normalmente composta de uma camada de zinco chrome over a steel or iron substrate. The chrome layer presents less porosity than the inner
e outra de cromo, sobre um substrato de ao ou de ferro. A camada de cromo apresenta zinc layer significantly increasing the resistance to corrosion and to the waste compared to
menor porosidade do que a camada interna de zinco, aumentando significativamente a re- surfaces only coated with zinc (eletroctrolytic zincifying) besides of propitiating best electric
sistncia a corroso e ao desgaste, em comparao superfcies revestidas somente com conductivity.
zinco (zincagem eletroltica), alm de proporcionar melhor condutividade eltrica.
O ELETROFORT uma bandeja para cabos com desenho prprio da Mopa. COMPONENTES IDENTIFICADOS
Possui diferenciais e vantagens exclusivas, proporcionando maior produtividade na ins- - Todos os componentes so marcados com a
talao, reduzindo o tempo de instalao, diminuindo assim o custo total da obra. Pro- logomarca MOPA, para garantir a qualidade do
porciona tambm, maior facilidade no transporte e armazenagem dos materiais. produto que o cliente esta recebendo.
ELETROFORT is a cable tray design made by Mopa. It has different and unique advantages, COMPONENTS IDENTIFICATION
propitiating higher productivity in the installation reducing the time of installation and thereby redu- - All components have the MOPA logo printed to ensure
cing the total cost of the work. It also provides easiness of transportation and storage of materials. the quality of the product the customer is receiving.
REFOROS ESTRUTURAIS
- Longitudinais nas laterais e na base,
auferindo maior capacidade de carga.
STRUCTURAL STRENGTHENING
- Sides and botton with longitudinal
structural L strengthening providing higher
load capacity .
TAMPA DE PRESSO
- No utiliza presilhas ou parafusos;
- Pode ser instalada na vertical;
8 - Possui reforos estruturais longitudinais.
PRESSURE COVER
REFOROS ESTRUTURAIS
- Do not use clamps or screws;
- Transversais, auferindo maior
- Can be vertically installed ;
capacidade de carga.
- It has longitudinal structural reinforcements. STRUCTURAL STRENGTHENING
- Cross sectional to grant higher load
capacity.
SISTEMA
AUTO PORTANTE.
Bandeja - Tray Tampa - Cover SELF-CONTAINING
ARESTAS NO CORTANTES NO SHARP EDGES SYSTEM
- Dobras 180 na bandeja e na tampa; - 180 folds in the tray and cover;
- Proporciona maior capacidade de carga; - Higher load capacity; FUROS REBAIXADOS
- 100% de segurana integridade dos cabos; - 100% safety to the integrity of the cabling; - Maior segurana integridade dos cabos.
- Evita acidentes de trabalho; - It prevents accidents in the workplace; DEPRESSED HOLES
- Permite que o sistema seja auto portante. - Assures self-containing feature of the system. - To provide further safety to the integrity of the cabling.
PERFORT
ACESSRIOS EM BLANQUE
- Dobravel manualmente;
- Dispensa o uso de talas;
- Permitem ajustes de ngulos diversos,
PERFIL MATA JUNTA H facilitando o alinhamento do sistema;
- Entre as peas; - Menor custo de transporte.
- 100% de segurana integridade dos ACCESSORIES BLANK
cabos; - Manual folding;
- Instalao estruturada; - Eliminates the use of splints;
- Melhor apelo esttico. - Settings allow different angles, facilitating
the alignment of the system;
H-Binder joint strip
- Lower shipping cost.
- In-between pieces;
-100% security of the cables integrity; FCIL E RPIDO DE MONTAR - EASY AND QUICK TO ASSEMBLE
- Structured Installation;
- Better aesthetic attractiveness.
FLEXIBILIDADE
- Peas multi uso, que reduzem o
nmero de itens diferentes, facilitando as
eventuais adaptaes ao longo da obra.
FLEXIBILITY
- Multi-use parts thus reducing the amount of
different items, making easy eventual adjust-
ments along the work.
Acabamentos e materiais do ELETROFORT e seus acessrios:
Finishing and materials of the Eletrofort and its accessories:
ELETROFORT Mata Junta H
O perfil de alumnio Mata junta H,
Z - Pr Zincado Fogo NBR 7008* - Hot Dip Pre-Gavanized NBR 7008*
Lisa
Solid acompanha os trechos retos de lar- G - Galvalume ASTM A792 - Galvalume ASTM A792
guras: 200, 300, 400, 500 e 600mm. P - Pintura eletrosttica vrias cores - Customized electrostatic painting in several colors
H-Binder joint strip A - Alumnio liga 1100 H14 - Aluminum alloy 1100 H14
The aluminium channel H-Binder joint
I - Inox - Stainless steel
strip follows the straight sections with wi-
ELETROFORT
dths of 200, 300, 400, 500 and 600mm. *Matria prima padro - todos os produtos com este acabamento esto disponveis em estoque.
Perfurada
*Standard raw material - Every product with this kind of finishing avaliable in stock.
Perforated
Carga Distribuida Apoios a Cada
Distributed load support each
As letras acima devem ser mencionadas no final de cada cdigo, veja exemplo:
1,5m 2m The above letters shall be mentioned at the end of each code. Example:
Dimenses LxAxC Ref. Lisa Peso Ref. Perfurada Peso Carga Fl. Carga Fl.
Dimension Ref. N weight Ref. N Weight Load Fl. Load Fl. Como especificar:
W x H x L Solid Kg/m Perforation Kg/m Kgf/m mm Kgf/m mm How to specify: 133-100/050-Z
050x050x3000 123-050/050- 0,70 133-050/050- 0,65 5 2
075x050x3000 123-075/050- 0,80 133-075/050- 0,74
Tipo - Type Dimenso - Dimension Acabamento - Finishing
7 2
(Lisa ou Perfurada) (Largura x Altura) (Z-G-P-A-I)
075x075x3000 123-075/075- 1,00 133-075/075- 0,93 10 3 (Solid or Perforated) (Width x Height) (Z or G or P or A or I)
10 100x050x3000 123-100/050- 1,18 133-100/050- 1,09 11 3
100x075x3000 123-100/075- 1,44 133-100/075- 1,31 10 2
100x100x3000 123-100/100- 1,70 133-100/100- 1,53 19 2
150x050x3000 123-150/050- 1,44 133-150/050- 1,33 14 4
150x075x3000 123-150/075- 1,70 133-150/075- 1,55 22 3 Vista Lateral Altura 50mm - Side View height 50mm
150x100x3000 123-150/100- 1,96 133-150/100- 1,77 28 4
Tampa de Presso - Pressure Cover
200x050x3000 123-200/050- 1,70 133-200/050- 1,57 19 1 19 4 Larg./Width Ref./Ref. N Kg/m
200x075x3000 123-200/075- 1,96 133-200/075- 1,79 28 2 28 6 50 129-050- 0,31
200x100x3000 123-200/100- 2,22 133-200/100- 2,01 39 3 39 6 75 129-075- 0,40
300x050x3000 123-300/050- 2,73 133-300/050- 2,55 29 3 29 8 Vista Lateral Altura 75mm - Side View height 75mm 100 129-100- 0,49
300x075x3000 123-300/075- 3,05 133-300/075- 2,83 44 4 44 10 150 129-150- 0,76
300x100x3000 123-300/100- 3,37 133-300/100- 3,11 59 5 59 10 200 129-200- 0,97
400x100x3000 123-400/100- 4,76 133-400/100- 4,39 81 17 75 21 300 129-300- 1,37
500x100x3000 123-500/100- 6,45 133-500/100- 5,95 101 16 81 20 400 129-400- 2,46
600x100x3000 123-600/100- 7,34 133-600/100- 6,77 121 18 75 20 500 129-500- 3,67
129-600-
carga calculada para uma taxa de ocupao de cabos de 40% da rea til, seguindo o critrio da NBR 5410:2004 subseo 6.2.11.1.6
load calculated for a 40% occupancy rate in the channel area, following the ISO criteria no. 5410:2004, sub-item 6.2.11.1.6 Vista Lateral Altura 100mm - Side View height 100mm 600 4,31
PERFORT
Tampa Tala incorporada, sistema auto portante.
Cover Incorpotare Spince.
Paraf. Cab.
Lent. auto
trav.
1/4 x 1/2
Mata Junta H - H-Binder joint strip Carriage
Head Screw
139-31-Larg/Width Self-Locking
1/4x1/2
Produto j includo para trechos retos com T Horizontal 90
Divisor - Divider larguras iguais ou maiores que 200mm. S 90 Horizontal Tee
139-30-Alt/Height-
comprar se quiser melhorar ainda mais o
acabamento dos trechos retos de larguras
Para fixao, acompanha 4 parafusos menores que 200mm.
cabea lentilha auto-travante 1/4x1/2, Product included for 200mm or higher width
com arruela lisa e porca sextavada. straight sections. Only required for further impro-
4 Carriage Head Screw Self-Locking 1/4x1/2 vement of the finishing in the straight sections Porca
and hex nut, included for fixing. with lower than 200mm width. Sextavada 1/4
Hex Nut 1/4
Arruela lisa 1/4
Mata Junta H, em alumnio Flat Washer 1/4
Aluminium H-Binder joint strip
Altura 50mm Talas auto portan-
Height 50mm tes p/ trecho reto Todos os acessrios so fornecidos em blank, possuem tala incorporada e 11
Altura 75mm Connector Splice for
straight sections devem ser dobrados manualmente na obra.
Height 75mm
All accessories supplied in blank with splint embodied to be manually folded on the site.
Altura 100mm
Height 100mm
Tala - Splice
139-28-Alt/Height-
Paraf. Cab.
Especificar 2 talas para cada ELETRO- Lent. Auto Trav.
FORT e 4 conjuntos de parafusos, porcas 1/4x1/2
e arruelas por tala. tens no inclusos. Carriage Head
Consulte pgina 41. Screw Self-Locking
Order 02 splice for each ELETROFORT and 04 1/4x1/2
screw sets, nuts and washers for splint. Items
not included. Please see page 41. Porca Sextavada 1/4 Arruela lisa 1/4
Hex Nut 1/4 Flat Washer 1/4
Curva Horiz. 90 Curva Horiz. 45 T Horizontal 90
90 Horizontal Bend 45 Horizontal Bend 90 Horizontal Tee
Blank 123-01-Larg/Alt-
Todos os acessrios dispensam o uso de talas, pois possuem talas incorporadas. Assim
Blank 123-00-Larg/Alt- Blank 123-07-Larg/Alt-
sendo, especificar apenas a metade da quantidade necessria no sistema tradicional de Width/Height Width/Height Width/Height
parafusos, porcas e arruelas. Consultar pgina 41. Tampa 129-01-Larg- Tampa 129-00-Larg- Tampa 129-07-Larg-
It is not required the use of splints in every fixture since they have splinces embodied. Therefore, order Cover Width Cover Width Cover Width
only half of the amount required in traditional systems of screws, nuts and washers. Please see page 41.
Curva Vertical Multi Funo
Adjustable Vertical Bend
Blank 123-18-Larg/Alt-
Width/Height
Tampa 129-18-Larg-
Cover Width
Cruzeta Horizontal 90 T Vert. Desc. Lateral T Vertical Descida Montagens Possveis para Curva Vertical Multi Funo
90 Horizontal Crosshead Side Descending Vertical Tee Descending Vertical Tee
Possible Assemblies for Multi-Functional Vertical Bend
Blank 123-11-Larg/Alt- Blank 123-08-Larg/Alt- Blank 123-10-Larg/Alt-
Width/Height Width/Height Width/Height
12
T Vertical Subida Flange Gotejador Curva Vertical Interna Curva Vertical Externa Curva de Inverso
Ascending Vertical Tee Flange Dripper Internal Vertical Bend External Vertical Bend Reversal Bend
Blank 123-09-Larg/Alt- 139-22-Larg/Alt- 139-25-Larg/Alt-
Width/Height Width/Height Width/Height
H1
H2
included adjustment. 100x075
123-14-150/075- 300x050 a 300x100 139-03-0300- 120 190
Regulagem permite a conexo de uma pea 150x075 075x075
Para larguras acima de 300mm aconselhvel o uso de
de largura maior varias larguras menores. 150x100 100x100 123-14-150/100-
Adjustment allows to connect a wider part to PERFORT sustentado por 2 vergalhes.
several smaller width. 150x050
With widths above 300mm we recomend to use the Perfort supported by
100x050
Tampa para Reduo 200x050 123-14-200/050- two bars.
075x050
Reductoron Cover
050x050
Larg. Maior Larg. Menor Referncia
Width Bigger Width Smaller Ref. N 150x075
75 050 129-14-075-050- 200x075 100x075 123-14-200/075-
075x075
050 129-14-100-050-
100 150x100
075 129-14-100-075- 123-14-200/100- Sada Horiz. Perfilado Para especificar parafusos, porcas, arruelas e ele-
050 129-14-150-050-
200x100
100x100
Horizontal Channel Output mentos de fixao, consultar a pgina 41.
13
200x050
150 075 129-14-150-075- 139-10-
To order screws, nuts, washers, and fixing
150x050
100 129-14-150-100- elements, please see page 41 .
300x050 100x050 123-14-300/050-
050 129-14-200-050-
075x050
075 129-14-200-075- B Sada Horizontal e Vertical p/ Eletroduto
200 050x050
100 129-14-200-100- Eletric trunking Horizontal and vertical Output
200x075
150 129-14-200-150- A B C D Ref. N Horizontal Ref. N Vertical
150x075
050 129-14-300-050- 123-14-300/075-
22 76 95 31 139-09-1/2- 139-11-1/2-
300x075
1/2
D
C
100x075
075 129-14-300-075-
300 100 129-14-300-100-
075x075 3/4 27 76 95 31 139-09-3/4- 139-11-3/4-
200x100
150 129-14-300-150- 1" 35 76 95 31 139-09-1- 139-11-1-
300x100 150x100 123-14-300/100-
200 129-14-300-200-
100x100 Horizontal 1 1/4 44 76 95 31 139-09-1 1/4- 139-11-1 1/4-
129-14-400-150-
19
150
400 200 129-14-400-200-
300X100
B 1 1/2" 50 76 95 31 139-09-1 1/2- 139-11-1 1/2-
400X100 200X100 123-14-400/100-
300 129-14-400-300- 62 114 133 50 139-09-2- 139-11-2-
D
150X100
2"
200 129-14-500-200-
2 1/2" 75 114 133 50 139-09-2 1/2- 139-11-2 1/2-
A
400X100
500 300 129-14-500-300- 38
C
Sistema auto
portante, acessrios
TAMPA DE PRESSO com talas acopladas,
- No utiliza presilhas ou parafusos; diminuindo o nmero
- Pode ser instalada na vertical; de itens a serem
adquidos.
- Possui reforos estruturais longitudinais.
Self-containing
PRESSURE COVER system, accessories
- Do not use clamps or screws; coupled with splints
- Can be vertically installed ; decreasing the
14 - It has longitudinal structural reinforcements. - Peas multi uso, que amount of items to
be purchased.
reduzem o nmero de itens
diferentes, facilitando as
Bandeja eventuais adaptaes ao
Tray longo da obra.
- Multi-use parts thus redu- REFOROS ESTRUTURAIS
cing the amount of different - Longitudinais nas laterais e na base,
items, making easy eventual
adjustments along the work.
auferindo maior capacidade de carga.
STRUCTURAL REINFORCEMENT
- Sides and base with longitudinal structural
reinforcements to provide higher load capacity.
Tampa - Cover
ARESTAS NO CORTANTES ACESSRIOS EM BLANQUE
- Dobras 180 na bandeja e na tampa; - Dobravel manualmente;
- Proporciona maior capacidade de carga; - Dispensa o uso de talas;
- 100% de segurana integridade dos cabos; - Permitem ajustes de ngulos
- Evita acidentes de trabalho;
diversos, facilitando o
- Permite que o sistema seja auto portante.
REFORO ESTRUTURAL alinhamento do sistema;
NO SHARP EDGES
- Recartilhado longitudinal no - Menor custo de transporte.
- 180 folds in the tray and cover; ponto de dobra; ACCESSORIES BLANK
- Higher load capacity; - Reforo na estrutura. - Manual folding;
- 100% safety to the integrity of the cabling; STRUCTURAL REINFORCEMENT - Eliminates the use of splints;
- It prevents accidents in the workplace; - Longitudinal knurling in the folds. - Settings allow different angles, facilitating the alignment of the system;
- Assures self-containing feature of the system. - Strengthening the structure. - Lower shipping cost.
ECOFORT As letras acima devem ser mencionadas no final de cada cdigo, veja exemplo:
Liso The above letters shall be mentioned at the end of each code. Example:
Solid
Mata Junta H Como especificar:
O perfil de alumnio Mata junta How to specify: 233-100/050-Z
H, acompanha os trechos retos de lar-
guras: 200, 300, 400, 500 e 600mm. Tipo - Type Dimenso - Dimension Acabamento - Finishing
H-Binder joint strip (Lisa ou Perfurada) (Largura x Altura) (Z-P)
ECOFORT The aluminium channel H-Binder joint (Solid or Perforated) (Width x Height) (Z or P)
Perfurado strip follows the straight sections with wi- Acessrios
Perforated dths of 200, 300, 400, 500 and 600mm.
Todos os acessrios utilizados no sistema ELETROFORT, se aplicam ao ECO-
FORT. Para especific-los, consultar as pginas 11, 12 e 13.
All accessories used in ELETROFORT System, apply to the ECOFORT system. To order,
Carga Distribuida
Apoios a Cada see pages 11, 12 e 13.
Distributed load support each
1,5m 2m
Dimenses LxAxC Ref. Lisa Peso Ref. Perfurada Peso Carga Fl. Carga Fl.
Dimension Ref. N weight Ref. N Weight Load Fl. Load Fl.
W x H x L Solid Kg/m Perforation Kg/m Kgf/m mm Kgf/m mm
16
TAMPA DE ENCAIXE
FITTING COVER
AUSNCIA DE REBARBAS
- Processo produtivo controlado:
corte e furao.
NO BURRS
- Controlled Production process:
cutting and drilling.
Height
Height
I - Inox - Stainless Steel
As letras acima devem ser mencionadas no final de cada cdigo, veja exemplo:
Width Width
The above letters shall be mentioned at the end of each code. Example:
Como especificar: Eletrocalha Lisa Tipo U (sem abas) Tipo C (com abas)
How to specify: 121-100/050-Z Solid Cable Tray Model U (without flaps) Model C (with flaps)
Dimenses LxAxC Chapa Referncia Peso Kg/m Referncia Peso Kg/m
Tipo - Type Dimenso - Dimension Acabamento - Finishing Dimension WxHxL Plate Ref. N Weight Kg/m Ref. N Weight Kg/m
(Lisa ou Perfurada) (Largura x Altura) (Z-G-F-P-A-I) 050x050x3000 22 121-0050/050- 0,96 120-0050/050- 1,09
(Solid or Perforated) (Width x Height) (Z or G or F or P or A or I) 075x050x3000 20 121-0075/050- 1,33 120-0075/050- 1,48
121-0075/075- 120-0075/075-
Sob encomenda, podemos fornecer em outras espessuras de chapa.
075x075x3000 20 1,71 1,76
Upon request, we can offer the plate in other widths.
Emenda Interna - Internal Connector 100x050x3000 20 121-0100/050- 1,52 120-0100/050- 1,68
Dim. LxA - Size (WxH) Referncia - Ref. N 100x075x3000 20 121-0100/075- 1,90 120-0100/075- 2,05
17
100 050x050 139-07-0050/050- 100x100x3000 18 121-0100/100- 2,66 120-0100/100- 2,84
139-07-0075- 121-0150/050- 120-0150/050-
0
50 24 126-050- 0,39
Divisor L Perfurado 75 24 126-075- 0,52
L Perforated Divider
126-100- 0,65
Height
Height
100 24
lt./Widht Referncia/Ref. N
A Kg/m
150 24 126-150- 0,91
50 139-08-050- 0,55
Width Width 200 24 126-200- 1,17
75 139-08-075- 0,73
300 24 126-300- 1,69
Eletrocalha Perfurada Tipo U (sem abas) Tipo C (com abas) 100 139-08-100- 0,92
Perforated Cable Tray Model U (without flaps) Model C (with flaps) Para fixao, utilizar 4 parafusos cabea lentilha 400 22 126-400- 2,72
Dimenses LxAxC Chapa Referncia Peso Kg/m Referncia Peso Kg/m auto-travante 1/4x1/2, com arruela lisa e porca sex- 500 22 126-500- 3,36
Dimension WxHxL Plate Ref. N Weight Kg/m Ref. N Weight Kg/m tavada. Itens no inclusos. consultar a pgina 41.
600 22 126-600- 4,00
050x050x3000 22 131-0050/050- 0,79 For fixing, use Carriage Head Screw Self-Locking
1/4x1/2 with hex nut and flat washer. Items not 700 22 126-700- 4,64
075x050x3000 20 131-0075/050- 1,09 130-0075/050- 1,21 included. See page 41.
700x100x3000 16 131-0700/100- 9,22 130-0700/100- 9,74 Tampa 126-01-Larg- Tampa 126-00-Larg- Tampa 126-02-Larg-
Cover Width Cover Width Cover Width
PERFORT
Curva Vert. Int. 45 Curva Vert. Ext. 90 Curva Vert. Ext. 45 Reduo Concntrica Reduo Esquerda Reduo Direita
45 Internal Vertical Bend 90 Internal Vertical Bend 45 External Vertical Bend Concentric Reduction Left Concentric Reduction Right Concentric Reduction
Base 121-03-Larg/Alt- Base 121-04-Larg/Alt- Base 121-05-Larg/Alt- Base 121-14-... Base 121-16-... Base 121-15-...
Width/Height Width/Height Width/Height Larg1/Alt1-Larg2/Alt2- Larg1/Alt1-Larg2/Alt2- Larg1/ Alt1-Larg2/Alt2-
Width1/Height1-W. 2/H. 2- Width1/Height1-W. 2/H. 2- Width1/Height1-W. 2/H. 2-
Tampa 126-03-Larg- Tampa 126-04-Larg- Tampa 126-05-Larg- Tampa 126-14-Larg1/Larg2- Tampa 126-16-Larg1/Larg2- Tampa 126-15-Larg1/Larg2-
Cover Width Cover Width Cover Width
Cover 126-14-Width1/W.2- Cover 126-16-Width1/W.2- Cover 126-15-Width1/W.2-
19
Curva de Inverso T Horizontal 90 T Vert. Desc. Lateral Desvio Direita Desvio Esquerda Para especificar para-
Reversal Bend 45 Horizontal Tee Side Go Down Vertical Tee Deviation to the Right/Elbow Deviation to the Left/Elbow fusos, porcas, arruelas
Base 121-06-Larg/Alt- 121-07-Larg/Alt- Base 121-08-Larg/Alt- e elementos de fixao,
Base Base 121-13-Larg/Alt- Base 121-12-Larg/Alt-
Width/Height Width/Height Width/Height
consultar a pgina 41.
Width/Height Width/Height
To order bolts, nuts, washers
Tampa 126-06-Larg- Tampa 126-07-Larg- Tampa 126-08-Larg- Tampa 126-13-Larg- Tampa 126-12-Larg- and fixing elements please see
Cover Width Cover Width Cover Width Cover Width Cover Width
page 41.
RECRAVAMENTO
- Elimina o processo de solda.
RE-CRIMPING
- Eliminates welding process.
20 30
TAMPAS 00
- Podem ser instaladas com o auxlio de presilhas;
- Podem ser intaladas na vertical.
COVERS
- It can be installed using cover clamps;
- It can be installed vertically.
FURAO
- Furao para fixao de aces-
srios e talas a cada 250mm.
DRILLING
ARESTAS NO CORTANTES
- Holes to secure accessories and
- Dobras 180 ;
splices every 250mm.
- Proporciona maior capacidade de carga;
- 100% de segurana integridade dos
cabos e usurios; Travessas lisas e perfuradas de
- Evita acidentes de trabalho. PERFORT 38x38, para LEITOFORT
NO SHARP EDGES tipo pesado, ou 38x19 para tipo mdio, so
- 180 Folds ; dispostas alternadamente, lisas com a
- Provides higher load capacity; abertura para baixo e perfuradas para cima, a cada 250mm.
- 100% safety to the integrity both of the cabling and users; Perforated and Solid Rungs 38 x 38 channel for heavy ladder tray, or 38 x 19
- It prevents accidents. for medium ladder tray, in alternate arrangement every 250mm
PERFORT
Acabamentos e materiais do LEITOFORT e seus acessrios:
Finishing and materials of the Ladder Tray and its accessories:
Z - Pr Zincado Fogo NBR 7008 - Hot Dip Pre-Gavanized NBR 7008
G - Galvalume ASTM A792 - Galvalume ASTM A792
F - Galvanizado Fogo segundo Norma NBR 6323 - Hot Dip Galvanized
P - Pintura Eletrosttica vrias cores - Customized electrostatic painting in several colors
A - Alumnio liga 1100 H14 - Aluminum alloy 1100 H14
I - Inox - Stainless Steel
As letras acima devem ser mencionadas no final de cada cdigo, veja exemplo:
The above letters shall be mentioned at the end of each code. Example:
Como especificar:
How to specify:
154-0500-Z
T
ipo - Type Dimenso - Dimension Acabamento - Finishing
(Mdio ou Pesado) (Largura ) (Z-G-F-P-A-I) LEITOFORT
(Medium or Heavy) (Width) (Z or G or F or P or A or I) Altura Largura Descrio Ref Peso Dist. Apoios 2m 2,5m 3m
Detalhe em corte do LEITOFORT nos trs tipos disponveis: Height Width Description Ref. N. Weight Distance Support
Kg/m Flecha (mm) 8,33 10,4 12,5
MDIO/Medium
Arrow
75 mm
21
Ref. 154
200 Longarina 154-0200- 3,45 123 85 53
300 75x19x3000 #18, 154-0300- 3,79 123 85 53
400 Travessas Perfort 154-0400- 4,12 Carga Kgf/m 123 85 53
500 38x19 #18, 154-0500- 4,46 123 85 53
600 a cada 250mm 154-0600- 4,80 123 85 53
200 155-0200- 3,95 315 181 106
300 155-0300- 4,29 315 181 106
MDIO/Medium
400 Longarina 155-0400- 4,62 302 192 106
100 mm
155-0500-
Ref. 155
500 100x19x3000 #18, 4,96 302 192 106
600 Travessas Perfort 155-0600- 5,30 218 150 93
700 38x19 #18, 155-0700- 5,64 Carga Kgf/m 218 150 93
800 Distnciadas a 155-0800- 5,98 149 117 90
900 cada 250mm 155-0900- 6,31 149 117 90
1000 155-1000- 6,65 128 106 75
1200 155-1200- 7,33 128 106 75
400 156-0400- 5,28 522 181 96
PESADO/Heavy
100 mm
Presilha de fixao de tampas, no inclusas. Altura 75 159-24- Altura 75 159-12- Altura 75 159-18-
22 Cover Clamp not included. Height 75 Height 75 Height75
Tampa de Encaixe Plana Tampa de Encaixe Duas guas Altura 100 159-25- Altura 100 159-13- Altura 100 159-19-
Height 100 Height100 Height 100
Flat Fit Cover Peacked Fit Cover
Trecho reto 158-Larg- Trecho reto 157-Larg-
Straight Section Width Straight Section Width
Acessrios 158-Tipo Acess.-Larg-
Acessrios 158-Tipo Acess.-Larg-
Accessory type accessory-Width Accessory type accessory-Width
154 75 50 Height 100 It can be used over the strut bracket, channel support, or directly on the
30
L 200 300 400 500 600 700 800 900 1000 1200
F 376 476 576 676 776 876 976 1076 1176 1376
J 553 653 453 853 953 1053 1153 1253 1353 1553
As Curvas Verticais e os T Verticais, so fornecidos em Kits, possibilitando que
um mesmo Kit aplique-se a Curva Vertical Interna e Externa de qualquer ngulo,
de Inverso e desnvel, ou T de Subida ou Descida. Os Kits so fornecidos com
segmento de montagem, talas articuladas, parafusos, porcas e arruelas.
Vertical Bends and Vertical Tee, are provided in sets, allowing to the same set to be applied
both to the External and Internal Vertical Bend from any angle, Inversion and gap, or Ascending
and DescendingT. Sets supplied with assembling segment, articulated splints, screws, nuts
Reduo Direita Reduo Esquerda Reduo Concntrica and washers.
Right Offset Reducers Left Offset Reducers Straight Reducers
Tipo-28-Larg1/Larg2- Tipo-29-Larg1/Larg2- Tipo-30-Larg1/Larg2-
Type Width1/Width2 Type Width1/Width2 Type Width1/Width2
24
TRAVESSAS
- De perfilado #14 perfuradas e lisas;
- Dispostas alternadamente, perfuradas
com abertura para cima e lisas para baixo;
- 250mm de distncia entre as travessas. 25
RUNGS
- Perforated or solid channel #14 ;
- Alternate arrangement with perforated opening
upwards and solid downwards;
- 250mm distance between channels.
LONGARINA
- 75x19 ou 100x19 #12
OUTRAS ESPECIFICAES Poderemos Outros desenhos e medidas podero
Travessas lisas e perfuradas de perfilado 38 x 38 fornecer com outras espessuras, tipos de ser desenvolvidos sob consulta.
chapa e/ou acabamentos. Consulte-nos. SIDE RAIL
para o leito tipo pesado ou 38 x 19 para o leito tipo
mdio, so dispostas alternadamente. OTHER SPECIFICATIONS - 75x19 ou 100x19 #12
We can supply ladder trays of different thin- Other designs and measures can be
Perforated and Solid Rungs from 38 x 38 channel for heavy
ckness, types of plate and finising. Please, developed upon request.
ladder tray or 38 x 19 for medium ladder tray in alternate
contact us.
layers.
Acabamentos e materiais do Leito para Cabos e seus acessrios:
Finishing and materials of Ladder Tray and its accessories:
F - Galvanizado Fogo segundo Norma NBR 6323 - Hot Dip Galvanized
P - Pintura Eletrosttica vrias cores - Customized electrostatic Painting in several colors
A - Alumnio liga 1100 H14 - Aluminum alloy 1100 H14
I - Inox - Stainless Steel
As letras acima devem ser mencionadas no final de cada cdigo, veja exemplo:
The above letters shall be mentioned at the end of each code. Example:
Como especificar:
How to specify: 152-0500-F
T
ipo - Type Dimenso - Dimension Acabamento - Finishing
(Mdio ou Pesado) (Largura ) (F-P-A-I) Leito Tradicional
(Medium or Heavy) (Width) (F or P or A or I) Ladder Tray
Detalhe em corte do LEITO PARA CABOS nos trs tipos disponveis:
Altura Largura Descrio R
eferncia Peso (Kg/m)
MDIO/Medium
Cross-sectional ladder Tray Detail available in three types: Height Width Description Ref. N. Weight
151-0200-
75 mm
Ref. 151
200 Longarina 5,32
300 75x19x3000 #12, 151-0300- 5,81
400 Travessas Perfilado 151-0400- 6,30
26 500 38x19 #14, 151-0500- 6,78
600 a cada 250mm 151-0600- 7,27
200 152-0200- 6,38
300 152-0300- 6,87
MDIO/Medium
400 Longarina 152-0400- 7,36
100 mm
Ref. 152
500 100x19x3000 #12, 152-0500- 7,84
600 Travessas Perfilado 152-0600- 8,33
700 38x19 #14, 152-0700- 8,82
800 Distnciadas a 152-0800- 9,31
900 cada 250mm 152-0900- 9,80
1000 152-1000- 10,29
1200 152-1200- 11,26
400 153-0400- 8,30
PESADO/Heavy
9,76
700 Travessas Perfilado 153-0700- 10,48
800 38x38 #14, 153-0800- 11,21
900 Distnciadas a 153-0900- 11,93
1000 cada 250mm 153-1000- 12,66
1200 153-1200- 14,11
PERFORT
ACESSRIOS PADRO Standard Fittings
Os acessrios seguem o mesmo padro construtivo do respectivo trecho reto.
Por padro os acessrios so fornecidos com raio seccionado. Sob consulta, para os aces-
srios de Leito Tradicional, poderemos fornecer com raio curvilneo. Utilizar: 04 ps de parafuso cab.
Accessories follow the same pattern of the related construction of the straight section. By default the Juno Articulada Juno lentilha auto travante 5/16x3/4,
accessories are supplied with sectioned radius. We can provide curved radius upon request. com porca e arruela, por tala.
Articulated Joining Plate Joining Connector (no inclusos)
Como especificar: Altura 75 159-26- Altura 75 159-04- Consultar a pgina 41.
151-01-0500-Z Height 75 Use 04 sets of carriage head
How to specify: Height 75
screws self-locking 5/16x3/4,
Altura 100 159-27- Altura 100 159-07- nuts and washers for splice.
Tipo - Type Ref. do Acessrio Acabamento Height 100 Height 100 Items not included. See page 41.
152 100 75 139-08-075- Curva Vert. Articulada Para especificar Sada para perfi-
Articulated Vertical Bend lado e Sada vertical e horizontal p/
153 100 50 139-08-050- eletroduto, consultar a pgina 13.
Para fixar o divisor ao leito, utilizar 04 parafusos cabea sextavada 1/4x3/4, com porca losangular com Tipo-45-Larg- To order Channel Output and the
mola e arruela lisa. Itens no inclusos. Consultar a pgina 41. To fix the Divider, use 04 hex bolt 1/4 x3 / Type Width Eletronic Trunking Output (vertical
4, lozenged nut with spring and flat washer. Items not included. See page 41. and horizontal), see page 13.
Curva Horiz. 90 Curva Horiz. 45 Cruzeta 90 T Horizontal T Reto Cruzeta Reta
90 Horizontal Bend 45 Horizontal Bend 90 Crosshead Horizontal Tee Straight Tee Straight Crosshead
Tipo-01-Larg- Tipo-02-Larg- Tipo-12-Larg- Tipo-13-Larg- Tipo-26-Larg- Tipo-27-Larg-
28 Type Width Type Width Type Width Type Width Type Width Type Width
Cotovelo Reto 90 Reduo Direita Reduo Esquerda Reduo Concntrica Juno 45 Direita Juno 45 Esquerda
90 Straight Elbow Right Offset Reducers Left Offset Reducers Straight Reducers 45 Right Joining 45 Left Joining
Tipo-31-Larg- Tipo-28-Larg1/Larg2- Tipo-29-Larg1/Larg2- Tipo-30-Larg1/Larg2- Tipo-11-Larg- Tipo-09-Larg-
Type Width Type Width1/Width2 Type Width1/Width2 Type Width1/Width2 Type Width Type Width
PERFORT
Juno 90 Direita Juno 90 Esquerda Curva Vert. Int. 45 Curva Vert. Ext. 45 T vertical de Subida T vertical de Descida
90 Right Joining 90 Left Joining 45 Internal Vertical Bend 45 External Vertical Bend Vertical Asceding Tee Vertical Descending Tee
Tipo-10-Larg- Tipo-08-Larg- Tipo-04-Larg- Tipo-06-Larg- Tipo-16-Larg- Tipo-17-Larg-
Type Width Type Width Type Width Type Width Type Width Type Width 29
Dimenses dos acessrios de Leito Tradicional
Dimensions of the Ladder accessories
L C D E K M P Q F J
Mdio altura/Height 75 e 100 mm
200 1093 646 823 441 324 691 491 376 553
medium (R) Raio Radius = 320
300 1193 746 923 512 424 832 662 476 653
400 1293 846 1023 583 524 974 833 576 753
500 1393 946 1123 654 624 1115 1004 676 853
600 1493 1046 1223 724 724 1257 1174 776 953
700 1593 1146 1323 795 824 1398 1345 876 1053
800 1693 1246 1423 866 924 1539 1516 976 1153 Curva de Inverso Curva Vertical Ext. 90 Curva Vertical Int. 90
900 1793 1346 1523 936 1024 1681 1686 1076 1253 Reversal Bend 90 External Vertical Bend 90 Internal Vertical Bend
1000 1893 1446 1623 1007 1124 1822 1857 1176 1353 Tipo-07-Larg- Tipo-05-Larg- Tipo-03-Larg-
1200 2093 1646 1823 1149 1324 2105 2199 1376 1553
Type Width Type Width Type Width
Pesado altura/Height 100 mm
400 1940 1171 1347 583 524 1109 867 576 753
500 2040 1271 1447 654 624 1250 1038 676 853 Dimenses do T Vertical de Subida e Descida Curva Vert. e de Inverso
600 2140 1371 1547 724 724 1392 1208 776 953 Dimensions: Ascend and Descend Vertical Tee Vertical and Reversal Bend
700 2240 1471 1647 795 824 1533 1379 876 1053 R S T R V W Z
800 2340 1571 1747 866 924 1674 1550 976 1153 Leito Mdio alt. 75mm - Medium Ladder Height 75mm 320 520 965 320 520 257 493
900 2440 1671 1847 936 1024 1816 1720 1076 1253 320 545 282 510
Leito Mdio alt. 100mm - Medium Ladder Height 100mm 320 545 990
1000 2540 1771 1947 1007 1124 1957 1891 1176 1353
1200 2740 1971 2147 1149 1324 2240 2233 1376 1353 Leito Pesado alt. 100mm - Heavy Ladder Height 100mm 675 870 1640 645 870 377 739
O leito para cabos denominado LEITO NAVAL um sistema para sustentao, conduo e
distribuio de fios e cabos, destinados a indstria de embarcaes e offshore.
Os modelos apresentados so resultado de vasta pesquisa de mercado e foram projetados
para atender as diversas necessidades e exigncias levantadas. Porm, a MOPA tambm
atende a projetos especficos de cada cliente, fabricando e fornecendo o melhor e mais ad-
equado produto que cada projeto exige.
The MARINE LADDER TRAY is a system to support and distribute wiring and cabling aimed to the vessel
manufacturing industry and the offshore market.
The models presented are the outcome of a wide market research, and they are designed to comply with OPES DE ACABAMENTO
several demands and requirements. But MOPA also complies with specific designs for each client by - Pintura Eletrosttica - P
manufacturing the best and most adequate product demanded by each design. - Galvanizao a fogo - F
FINISHING OPTIONS
- Electrostatic Painted - P
- Hot Dip Galvanized - F
OUTRAS ESPECIFICAES
Sob consulta poderemos fornecer
em outras dimenses e mate-
riais. Consulte-nos.
OTHER SPECIFICATIONS
Upon request, we can supply ladder
30 trays of different dimentions and
materials. Please, contact us.
MATERIA PRIMA
- Ao carbono SAE 1008 /1010
- Sob consulta tambm produzido em ao inoxidvel ou alumnio
RAW MATERIAL
- SAE 1008 /1010 carbon steel
- Uppon request, also produced in stainless steel or aluminum
MODELOS COMPONENTES
- Bilateral com travessas em Z - longarina 38 x 3 mm ou 38 x 4,75 mm (altura x espessura)
- Unilateral com travessas em perfil V - travessas 2 mm (espessura)
MODELS COMPONENTS
- Bilateral with Z channel rungs - Stringer 38 x 3 mm or 38 x 4,75 mm(height x thickness)
- Unilateral with V channel rungs - Rungs 2 mm (thickness)
PERFORT
Acabamentos e materiais do Leito Naval e seus acessrios:
Finishing and materials of Naval Ladder Tray and its accessories:
31
Obs: Substituir o ?
pela espessura da longa-
rina: 3 ou 4,75.
Note: Replace the ? for the
stinger thickness: 3 or 4,75..
TRAVESAS - em perfil V
Rungs in V profile
Curva Horizontal 90
90 Horizontal Bend
Larg./Width Referncia/Ref. N
100 162-02-100-?-
150 162-02-150-?-
200 162-02-200-?-
300 162-02-300-?-
162-02-400-?-
Leito Naval Unilateral Especial
400
Special Unilateral Marine Ladder Tray
500 162-02-500-?-
Larg./Width Referncia/Ref. N
Obs: Substituir o ? pelo raio desejado: 400 ou 600. 162-02-600-?-
162-0100-
600
100 Note: Replace the ? for the desired radius: 400 or 600 .
162-02-800-?-
162-0150-
800
150
200 162-0200-
300 162-0300-
400 162-0400-
500 162-0500-
600 162-0600- 33
800 162-0800-
TRAVESAS - em perfil V
Sob consulta poderemos fornecer em outras
especificaes. Consulte-nos.
Upon request, Rungs insupply
we can V profile
ladder trays of
different specifications.Contact us.
Arruela Adaptadora Suspensor p/ Cabo de Ao 1/8 Sada Final 3/4 Sada Superior 3/4 Sada Lateral Dupla 3/4
Square Washer Suspender For 1/8 Steel Cable 3/4 Final Outlet 3/4 Upper Outlet 3/4 Side Double Outlet
114-32- 114-33- 114-28- 114-29- 114-31-
PERFORT
137
137
Incluso parafuso cab. sext. 3/8x2
87
87
Carga Mxima 100Kgf.
Hex bolt 3/8x2, Hex nut 3/8 included. For
Gancho Curto Gancho Longo Gancho Curto Gancho Longo balance hanger: maximum Load: 100Kgf.
38
38
165 38
37
Caixa com Tomada Caixa com Tomada
10A- 250V e fixao 20A- 250V e fixao
165
Socket Box For Channel Socket Box For Channel
20A-250V and fixing 20A-250V and fixing
Curva Vertical Interna 90 Curva de Inverso Curva vertical Externa 90
90 Vertical External Bend
114-70-G 114-71-G
90 Vertical Internal Bend Reversal Bend
38
A caixa de tomada p/ PERFORT utiliza apenas um conjunto de porca
113-06- 113-08- 113-07- losangular com pino de 1/4, c/ porca sextavada e arruela lisa. Itens
inclusos. O outro lado da caixa se fixa por encaixe.
Curva vertical Interna 45 Curva Vertical Externa 45
45 Vertical Internal Bend 45 Vertical External Bend The outlet box for Perfort uses only a set of lozanged nut with 1/4 pin and hexagonal
nut with plain washer. Items included. The other side of the box is fixed by fitting.
113-09- 113-10-
10
0
53
0
10
Mo Francesa Dupla
Double Strut Bracket
Dim. A Referncia Carga Dist.(kg)
Size(A) Ref. N Distributed Load
300 113-04-0300- 98 Cantoneira Perfurada
400 113-04-0400-
Perforated Angle
98
Dimenso Chapa Referncia Peso
500 113-04-0500- 64 Dimension Plate Ref. N Kg/m
A 600 113-04-0600- 64
38x3000 16 113-02-16-Z 0,90
700 113-04-0700- 54
800 113-04-0800- 46
900 113-04-0900- 45
PERFORT
3/16x32mm
29 45 29 103
3/16x32mm
1/4x38mm
1/4x38mm
Dimenses F
3 115-01-3-F 91 94 F Dimension 3 115-02-3-F 91 152
3 1/2 115-01-3 1/2-F 104 97 1/2 2 = 11mm 3 1/2 115-02-3 1/2-F 104 160
2 1/2 4 = 14mm
4 115-01-4-F 117 105 4 115-02-4-F 117 168
Braadeira D Braadeira D Com Cunha
D Pipe Clamp D Pipe Clamp with Wedge
Descrio Referncia Dimenso Descrio Referncia Dimenso
Descrition Ref. N Dimension Descrition Ref. N Dimension
A C A C
3/8 115-04-3/8- 17,5 22 12 315-04-1/2- 22 25
1/2 115-04-1/2- 22 25 1 315-04-1- 34 33
3/4 115-04-3/4- 27,5 27 1 1/4 315-04-1 1/4- 43 40
1 115-04-1- 34 33 1 1/2 315-04-1 1/2- 49 43
Acabamentos
disponveis 1 1/4 115-04-1 1/4- 43 40 2 315-04-2- 61 50
(Z-F-P-I) 1 1/2 115-04-1 1/2- 49 43 2 1/2 315-04-2 1/2- 75 55
Available
Finishing 2 115-04-2- 61 50 3/4 315-04-3/4- 90 65
115-04-2 1/2- 315-04-3-
(Z-F-P-I) Acabamentos
2 1/2 75 55 3 90 65
disponveis
3 115-04-3- 90 65 (Z-F-P-I) 3 1/2 315-04-3 1/2- 102 75
Incluso: paraf. cab. red. 1/4 e 3 1/2 115-04-3 1/2- 102 75 Available
4 315-04-4- 114 85
porca sext. 1/4 Finishing
4 115-04-4- 114 85 (Z-F-P-I)
1/4 Hex nuts and 1/4 round head
screw included.
40
Braadeira Simples Braadeira U p/ Perfilado
Simple Pipe Clamp U Pipe Clamp for Channel
Descrio Referncia Dimenso Descrio Referncia Dimenso
Descrition Ref. N Dimension Descrition Ref. N Dimension
A C A
1/2 115-05-1/2- 22 11 3/8 115-06-3/8- 17,5
3/4 115-05-3/4- 27,5 13,7 1/2 115-06-1/2- 22
Acabamentos disponveis
(Z-F-P-I) 1 115-05-1- 34 17 3/4 115-06-3/4- 27,5
Available Finishing
1 1/4 115-05-1 1/4- 43 21,5 1 115-06-1- 34
(Z-F-P-I)
1 1/2 115-05-1 1/2- 49 24,5 1 1/4 115-06-1 1/4- 43
115-05-2- 115-06-1 1/2-
Acabamentos
2 61 30,5 1 1/2 49
disponveis
2 1/2 115-05-2 1/2- 75 37,5 (Z-F-P-I) 2 115-06-2- 61
115-05-3- 115-06-2 1/2-
Available Finishing
3 90 45 (Z-F-P-I) 2 1/2 75
Dimenses F 3 1/2 115-05-3 1/2- 102 51 3 115-06-3- 90
Incluso: paraf. cab. red.
F Dimension
4 115-05-4- 114 57 1/4 e porca sext. 1/4 3 1/2 115-06-3 1/2- 102
1/2 1 = 8mm
1 1/4 4 = 11mm
1/4 Hex nuts and 1/4
round head screw included.
4 115-06-4- 114
PERFORT
Os materiais e acabamentos dos elementos roscados devem acompanhar a espe-
cificao do bandejamento, segundo a correspondncia da tabela abaixo.
Materials and finishing of the threaded elements shall follow the tray specification according
to the below chart.
Especificao do Sistema Especificao p/ materiais roscados
System Specification Specification for threaded materials
Z - Pr Zincado - Hot Dip Pre-Galvanized B - bicromatizado - Bichromated
F - Galvanizado fogo - Hot Dip Galvanized B - bicromatizado - Bichromated Prolongador Sextavada Vergalho Rosca Total
ou/or I - Inox - Stainless Steel Hex Coupling Nut Continuous Threaded Rod
G - Galvalume - Galvalume B - bicromatizado - Bichromated Descrio/Description Ref. - Ref. N Descrio Referncia Carga Kgf
P - Pintura eletrosttica - Eletrostatic Pinted B - bicromatizado - Bichromated
A - Alumnio - Aluminum I - Inox - Stainless Steel 1/4x50mm 114-39-1/4- Description Ref. N Load Kgf
I - Inox - Stainless Steel I - Inox - Stainless Steel 5/16x50mm 114-39-5/16- 1/4x3000 114-40-1/4- 230
As letras que designam os acabamentos e materiais da segunda coluna, devem ser mencio- 3/8"x50mm 114-39-3/8- 5/16x3000 114-40-5/16- 390
nadas no final de cada cdigo.
3/8x3000 114-40-3/8- 540
The above letters designate the finishing and materials in the second column, and they shall be men-
tioned at the end of each code.
Parafuso Cab. Sextavada Parafuso Cab. Sext. Rosca Soberba Bucha de Nylon
Hex Bolt Hex Head Screw With Conical Thread Nylon Cinch Anchor
Utilizado em obras novas ou reformas, com ou sem forro, onde especialmente FCIL INSTALAO E REINSTALAO
interessante, pois no exige nenhuma obra civil para sua instalao, sua fixao - Permite mudana rpida de lay-out, pois basta desconectar
feita sob presso, sem necessidade de buchas ou parafusos, o que mantm pisos os cabos e eletrodutos superiores, soltar a sapata de fixao, e
e acabamentos intactos. intercambiar a placa de forro e o MOPOST para outra posio.
Used in new works or refurbishing with or without lining when it is especially interesting, as it EASY TO INSTALL AND RE-INSTALL
does not require any civil work to be installed, since its attachment is performed under pressure - It allows a fast layout change, since it is enough to disconnect the
without needing any bishing or screws, and this keeps both the floor and the finishing intact. cables and upper electrodutes, release the attachment floor support,
and interchange the lining plate and the MOPOST in other position.
PERFORT
Sapata de Fixao / Attachment clamp
190mm para p direito / high = 2800mm MOPOST
390mm para p direito / high = 3000mm Descrio/Description Referncia/Ref. N
MOPOST 129x44x2650mm 190-01
Box no inclusos Composto por: Tampa superior, Tampa inferior, arremate, base, 01 suporte com 6 furos
Box not included
Composed by: Upper cover, lower cover, tailpiece, base, 01 support with 02 holes
Furo para eletro- Sapata de fixao 190mm Attachment clamp 191-01-E
duto 1/2 Gs Sapata de fixao 390mm Attachment clamp 191-02-E
1/2 Hole for elec- Notas:
trodute of gas - O MOPOST fabricado em chapa Pr Zincada Fogo, com pintura eletrosttica texturizada
na cor bege (WEG 215A 1408) em sua parte externa.
- Sob consulta poderemos fornecer em outros comprimentos e cores.
Notes:
- Mopost is manufactured in hot-dip pre-galvanized plate with texturized electrostatic
painting in beige (WEG 215A 1408) on the outside.
- Upon request, we can supply in other lenghts and colors.
Arremate
Tailpiece
Um divisor fixado a base, separa os
cabos de energia dos demais sistemas,
garantindo maior proteo contra
interferncias eletromagnticas.
A fixed divider to the base separetes the
power cabling from the other systems
45
assuring a higher protection against
electromagnetic interferences.
Tampa superior
Upper cover
Carpete/ Carpet
TAMPAS EM ALUMNIO
Todos os modelos de tampas so
confeccionados em alumnio com a superfcie
superior polida, sendo que o seu desenho
permite um perfeito acabamento, ocultando
possveis imperfeies no recorte do
revestimento do piso.
ALUMINUM COVER
Every model of Lids and trims are manufactured Paviflex/Paviflex
in aluminum with its upper surface polished. The
design allows a perfect finishing concealing possible
imperfections in the cutting of the floor coating. Para o encaminhamento de
cabos, a Mopa disponibiliza o
46 MOPADUTO para os sistemas
de contra piso.
To direct the cabling, Mopa makes
Contra piso available the MOPADUTO for
the duct trunking system.
Porcelanato/ Porcelain
A s c a i x a s d e t o m a d a s m o d e l o S T D , s o
disponibilizadas em 3 tamanhos, permitindo assim,
diferentes quantidades de pontos de energia, voz,
dados e imagem, atendendo as mais diversas
necessidades de projeto.
The STD floor boxes are available in 2 sizes thus allowing
As caixas de tomadas modelo LUME, so fornecidas para duas alturas de contra piso: 76 e 56mm. different quantities of power, voice, data, and image points to
The LUME floor boxes are supplied for 76 and 56m height floor trunking. comply with the most diversified design requirements. Carpete Madeira/ Wooden Carpet
Cx. de Tomada LUME 3x70 Alt. 76mm p/ Contrapiso
LUME Screed Floor Box 3x70 height 76mm
Placa de regulagem do Sada de cabos c/ escova de nylon.
revestimento. Cabling exit with nylon brush.
76
Coating adjustment plate.
21 5
Suporte de tomadas em Quadro/Tampa de alumnio LUME 5 23
chapa pr galvanizada a LUME Frame and Cover in Aluminium
fogo, com pintura Dim. Externa 241 x 241 mm Cx de Tomada LUME 3x70
eletrosttica na cor preta. External dim. Alt 76mm p/ Contrapiso
Quadro/
Tampa Outlet Plate in hot-dip Dim. Revestimento 184 x 150 mm LUME Screed Floor Box
galvanized plate in black Coating dim. 3x70 mm Height 76mm
Frame and
electrostatic painting.
Cover 165-22-TB 165-102
Suportes Pintados p/ Caixas de Tomada LUME 3x70 Alt. 76mm
Painted Outlet Plates for LUME 3x70 hgt. 76mm Floor Boxes
47
Os divisores das caixas possuem rasgos
destacveis, que permitem o intercmbio
dos fios para outros suportes de tomadas. P/ 2 Tomadas de Energia P/ 3 Tomadas de Energia P/ 6 Tomadas Tipo RJ
Box dividers with removable tears to allow the 2 Power Outlet Plate 3 Power Outlet Plate 6 Data Outlet Plate
interchanging of the wiring to other socket support.
149-0285-76-PR 149-0385-76-PR 149-112-76-PR
Uso na parte central da caixa Uso na extremidade da caixa 3 6 furos 14,7x19,3mm -
2 furos s/ tomadas (vazio) furos s/ tomadas (vazio) sem tomadas (vazio)
Used at the central of the box 2 outlets Used at the edge of the box 6 Outlets 14,7x19,3mm without
without sockets (empty) 3 outlets without sockets (empty) sockets (empty)
Tomadas de Energia
Power Socket
Referncia/Ref. N Descrio/Description Cor /Color
149-123-BR 10A-250V Branca/White
149-123-VM 10A-250V Vermelha/Red
149-124-BR 20A-250V Branca/White
Detalhe em corte com suportes de tomada. 149-124-VM 20A-250V Vermelha/Red
Cross-sectional detail with power outlet plates. Tampes para Suportes de Tomadas
Obs: A tampa de Alumnio, a caixa com tampa provisria, os suportes de tomadas, Power and Data Outlet Cover
tomadas e tampes, devem ser especificados separadamente. Referncia/Ref. N Descrio/Description Furo (mm)/Hole
149-21 P/ tomada RJ/ Data Outlet Cover 14,7 x 19,3
Note: The aluminum lid, the box with provisional lid, the outlet plates, sockets and outlet covers must
be specified separately. 149-141 P/ 1 md. de tom./ Power Outlet Cover
Cx. de Tomada LUME 2x70 Alt. 56mm p/ Contrapiso
LUME Screed Floor Box 2x70 mm Height 56mm
Quadro/Tampa Sada de Cabos com
Frame and Cover escova de nylon.
Cabling exit with nylon
Sada de Cabos com brush.
escova de nylon.
Cabling exit with nylon
brush.
Placa de regulagem do
revestimento.
Suporte de tomadas em Coating adjustment plate.
Quadro/Tampa de alumnio LUME
chapa pr galvanizada LUME Frame and Cover in Aluminium
a fogo, com pintura Cx de Tomada LUME 2x70
eletrosttica na cor preta. Dim. Externa 241 x 241 mm Alt 56mm p/ Contrapiso
External dim. LUME Screed Floor Box
Outlet Plate in hot-dip
Dim. Revestimento 184 x 150 mm 2x70 mm Height 56mm
galvanized plate in black
electrostatic painting. Coating dim.
Base em chapa 165-22-TB 166-101
Encaixe para duto galvanizada.
25x70mm. Eles penetram Base in galvani- Suportes Pintados p/ Caixas de Tomada LUME 2x70 Alt. 56mm
10mm na caixa. zed plate. Painted Outlet Plates for LUME 2x70 hgt. 56mm Floor Boxes
48 Fitting for 25x70mm duct.
They penetrate 10mm into
the box.
Esta caixa possui entradas para 02 dutos 25x70 em suas extremidades.
This box has entries for 2 (25x70) ducts in its edges.
P/ 3 Tomadas de Energia P/ 6 Tomadas Tipo RJ
3 Power Outlet Plate 6 Data Outlet Plate
149-0395-56-PR 149-212-56-PR
3 furos - sem tomada (vazio) 6 furos 14,7x19,3mm - sem tomadas (vazio)
3 outlets without sockets (empty) 6 Outlets 14,7x19,3mm without sockets (empty)
Tomadas de Energia
Power Socket
Referncia/Ref.N Descrio/Description Cor /Color
149-123-BR 10A-250V Branca/White
149-123-VM 10A-250V Vermelha/Red
Obs: A tampa de Alumnio, a caixa 149-124-BR 20A-250V Branca/White
Na caixa de tomada de altura 56mm, a sada de com tampa provisria, os suportes de 149-124-VM 20A-250V Vermelha/Red
cabos deve ficar obrigatoriamente transversal tomadas, tomadas e tampes, devem ser Tampes para Suportes de Tomadas
aos dutos, conforme figuras abaixo. especificados separadamente. Power and Data Outlet Cover
In the Screed Floor Box 56m m height, the exit of the N ote: The aluminum cover, the box with Referncia/Ref. N Descrio/Description Furo (mm)/Hole
cabling shall mandatorily be transversal to the ducts provisional lid, the outlet plates, sockets and 149-21 P/ tomada RJ/ Data Outlet Cover 14,7 x 19,3
as it is seen in the below figures. outlet covers must be specified separately.
149-141 P/ 1 md. de tom. / Power Outlet Cover
Cx. de Tomada STD para Contrapiso Suportes Pintados p/ Caixas de Tomada STD 2x70
Painted Outlet Plates for STD 2x70 Floor Boxes
STD Screed Floor Box
Quadro com tampa
Escova de Nylon.
basculante em
Nylon Brush.
alumnio polido com
rebaixo de 3mm.
Frame with sliding
Suporte de tomadas em P/ 3 Tomadas de Energia P/ 4 Tomadas Tipo RJ
cover in polished 3 Power Outlet Plate 4 Data Outlet Plate
aluminum with a 3mm
chapa pr galvanizada
recess. a fogo, com pintura 149-0355-PR 149-12-PR
eletrosttica na cor preta. 3 furos - sem tomada (vazio) 4 furos 14,7x19,3mm - sem tomadas (vazio)
Os dutos penetram 3 outlets without sockets (empty) 4 Outlets 14,7x19,3mm w/out sockets (empty)
Outlet Plate in hot-dip
10mm na caixa. galvanized plate in black Suportes Pintados p/ Caixas de Tomada STD 3x70
Ducts penetrate electrostatic painting. Painted Outlet Plates for STD 3x70 and 4x70 Floor Boxes
76
10mm into the box.
Base em chapa
galvanizada.
Base in galvanized
6
plate
17 P/ 2 Tomadas de Energia P/ 3 Tomadas de Energia P/ 4 Tomadas Tipo RJ
2 Power Outlet Plate 3 Power Outlet Plate 4 Data Outlet Plate
Quadro / Tampa de Alumnio STD 149-0255-PR 149-0355-PR 149-12-PR
STD Frame and Cover in Aluminium Uso na parte central da caixa Uso na extremidade da caixa 4 furos 14,7x19,3mm - 49
Caixa Referncia Dim. Externa Dim. Revest. 2 furos s/ tomadas (vazio) 3 furos s/ tomadas (vazio) sem tomadas (vazio)
Used at the central of the box 2 outlets Used at the edge of the box 3 outlets 4 Outlets 14,7x19,3mm without
Box Ref. External Dim. Coating Dim
without sockets (empty) without sockets (empty) sockets (empty)
2x70 145-21-TB 173x197 110x158 Utilizar 2 tampas
Suportes Pintados p/ Caixas de Tomada STD 4x70
3x70 145-22-TB 243x197 181x158 2x70 - 145-21-TB Painted Outlet Plates for STD 3x70 and 4x70 Floor Boxes
Caixa 3x70 Alt. 76mm 210x210 Caixa 3x70 Alt. 76mm 12x25x70
3x70hgt. 76mm 210x210 Junction Box 3x70hgt. 76mm 12x25x70 Junction Box
163-110 163-107
Caixa 2x70 Alt. 76mm 8x25x70
2x70 Hgt. 76mm 8x25x70 Junction Box As caixas de pas-
163-102 sagem esto aqui
representadas
sem suas tam-
Tampa de Alumnio LUME p/ Caixa 2x70 pas, para facilitar
LUME Aluminum Cover for 2x70 Junction box o entendimento
Dim. Externa 171 x 171 mm das pontes. Caixa 3x70 Alt. 76mm
External dim. The junction Boxes 4x25x70+4x25x140
Dim. Revestimento 125 x 125 mm represented here is 3x70 Hgt. 76mm
Coating dim. without its covers to
4x25x70+4x25x140 Junction Box
help to understand
163-22-A the bridges. 163-103
Caixa de Passagem 4x70 As caixas de passagem esto aqui representadas sem suas tampas,
para facilitar o entendimento das pontes.
Junction Box 4x70 The junction Boxes represented here is without its covers to help
Deve-se especificar separadamente a tampa e a caixa. to understand the bridges.
Cover and box specified separately.
Caixa 4x70 Alt. 76mm Caixa 4x70 Alt. 76mm Caixa 4x70 Alt. 76mm Caixa 4x70 Alt. 76mm
280x280 16x25x70 4x25x70+2x25x140+2x25x210 2x25x70+6x25x140
4x70 hgt. 76mm 4x70 hgt. 76mm 4x70 hgt. 76mm 4x70 hgt. 76mm
280x280 Junction Box 16x25x70 Junction Box 4x25x70+2x25x140+2x25x210 Junction Box 2x25x70+6x25x140 Junction Box
163-130 163-108 163-135 163-136
Caixa de Passagem 6x70
Junction Box 6x70
Deve-se especificar separadamente a tampa e a caixa.
Covers and box specified separately.
Caixa 6x70 Alt. 76mm Caixa 6x70 Alt. 76mm Caixa 6x70 Alt. 76mm Caixa 6x70 Alt. 76mm 2x25x70 Caixa 6x70 Alt. 76mm
420x420 12x25x140 4x25x140+2x25x210+2x25x280 +2x25x140+2x25x210 +2x25x350 2x25x140+6x25x210
6x70 hgt. 76mm 6x70 hgt. 76mm 6x70 hgt. 76mm 4x25x140 6x70 hgt. 76mm 2x25x70 +2x25x140 6x70 hgt. 76mm 2x25x140
420x420 junction Box 12x25x140 junction Box +2x25x210+2x25x280 junction Box +2x25x210+2x25x350 junction Box +6x25x210 junction Box
163-120 163-133 163-149 163-150 163-151
O MOPADUTO fabricado em chapa pr zincada fogo. Os dutos so formados por Caractersticas das Curvas:
perfis U corrugados, que do maior resistncia mecnica e aderncia ao concreto, Para formao de curvas
e unem-se sob presso, impedindo a entrada de argamassa durante a concretagem. verticais 90 e horizontais 45
Permitem o remanejamento de seus perfis, para a formao de outros dutos, onde se com 02 ou mais vias, deve-
se combinar as peas lado a
pode por exemplo, com as partes inferiores do duto 2x25x70, formar o duto 25x70. lado. necessrio o uso de
MOPADUTO is a underfloor ducting system manufactured in hot-dip pre-galvanized plate. junes na unio entre dutos
The ducts are formed with corrugated U-channel that provide a higher mechanical resistance e curvas (fig.1 e fig.2).
and adherence to the concrete, and they are united under pressure preventing the entry of No utiliza-se curvas horizon-
mortar during the concrete pouring. They allow to move the profile to form other ducts, where tais 90, pois nestes pontos
it can be formed, for instance, the lower parts of the 2x25x70 duct to form the25x70 duct. Fig. 01
devem ser previstas caixas
Curva Vertical/Vertical Bend
de passagem. Em casos ex-
cepcionais onde isto no seja
Reforos transversais
possvel, proceder a monta-
(maior aderncia ao concreto).
gem como o detalhe (fig. 3).
Transverse reinforcements
Para formao de desnveis
(higher adherence to the concrete)
paralelos, utilizam-se os des-
nveis lineares (fig.4).
Features of the Curves:
To form 90 vertical curves and 45
horizontal curves w/ 02 or more
ways,it is required to combine the
54 parts side by side. It is required Fig. 02
junctions between the joint of Curva Horizontal/Horizontal Bend
ducts and curves (fig.1 and 2).
It is not recommended the use
Encaixe de presso. of 90 horizontal curves , it is
Snap-in fitting. foreseen for the junction boxes.
In special cases when this is not
possible, to make the assembling
as shown in the detail of the fig. 3.
Reforos estruturais longitudinais. To form parallel drops, it is used
linear drops (fig. 4). Fig. 03
Longitudinal structural reinforcement. Curva Horizontal 90
90 horizontal Bend
Utilizar apenas em casos
excepcionais
5 vias/ways
To use in special cases
4 vias/ways
mm
50
00
00
40
40
Tampo para Caixa Tampo para Duto Desnvel Linear
passagem/tomada Duct End Stop Simples
25x140 Junction Box End Stop Plain Lineal Drop
25x70 Duto/Duct Ref./Ref. N Duto/Duct Ref./Ref. N Duto/Duct Ref./Ref. N
25 x 35 142-05-035 25 x 70 142-04-070 25 x 70 142-11-1/070
Mopadutos
Duct Length 25 x 70 142-05-070 25 x 140 142-04-140 25 x 140 142-11-1/140
Duto/Duct Ref./Ref. N Peso/Weight 25 x 105 142-05-105 25 x 210 142-04-210 Comprimento total = 127mm
mm
25 x 70 140-1/070 1,2
40
44,5
25 x 420 142-05-420
63
44
,5
70
Curva Horizontal 45 Curva Vertical 90
70
Juno Suporte de Fixao Luva de Arremate 45 Horizontal Bend 90 Vertical Bend
Joint Component Saddle Clamp Trunking Adaptor Duto/Duct Ref./Ref. N Duto/Duct Ref./Ref. N
Duto/Duct Ref./Ref. N Duto/Duct Ref./Ref. N Duto/Duct Ref./Ref. N 25 x 70 142-10-1/070 25 x 70 142-08-1/070
25 x 70 142-01-070 25 x 70 142-02-070 25 x 70 142-03-070 25 x 140 142-10-1/140 25 x 140 142-08-1/140
25 x 140 142-01-140 25 x 140 142-02-140 25 x 140 142-03-140 Conector p/ Eletroduto com Furo Descartvel 3/4 e 1
25 x 210 142-01-210 25 x 210 142-02-210 25 x 210 142-03-210 Connector for Electroduct w/ D isposable 3/4 and 1 Hole
25 x 280 142-01-280 25 x 280 142-02-280 25 x 280 142-03-280 Duto/Duct Ref./Ref. N Quant. Furos/Holes
25 x 350 142-01-350 25 x 350 142-02-350 25 x 350 142-03-350 25 x 70 142-06-070 01
25 x 420 142-01-420 25 x 420 142-02-420 25 x 420 142-03-420 25 x 140 142-06-140 02
Incluso 04 paraf. cab. red. 25 x 210 142-06-210 03
3/16x3/8 c/ porca.
Included: 04 round head screw w/ nut. 25 x 280 142-06-280 04
Os SISTEMAS DE PISO ELEVADO so caracterizados pela facilidade na passagem A Mopa desenvolveu diversos
de fios e cabos sob os mesmos, permitindo grande flexibilidade nas mudanas de modelos de caixas de tomada
com caractersticas prprias para
lay-out, por sua forma de construo e instalao. utilizao em pisos elevados. So
RAISEDTRUNKING SYSTEMS are characterized by the easy passage of the wiring and ca- apresentadas em vrios modelos:
bling under them, granting a higher flexibility to change the layout, due to both its construction Mopa developed several models of floor
and installation. boxes with own features to be used in
raised floors, and they are presented in
several models:
Tomadas de Energia
Power Socket
Referncia/Ref. N Descrio/Description Cor /Color
149-123-BR 10A-250V Branca/White
149-123-VM 10A-250V Vermelha/Red
149-124-BR 20A-250V Branca/White
149-124-VM 20A-250V Vermelha/Red
Tampes para Suportes de Tomadas
Power and Data Outlet Cover
Referncia/Ref. N Descrio/Description Furo (mm)/Hole
149-21 P/ tomada RJ/ Data Outlet Cover 14,7 x 19,3
Corte da caixa 3x70, instalada em placa de piso elevado com paviflex, carpete e granito.
Cross-section of the 3x70 cavity floor box installed in a raised floor with Paviflex, carpet and granite. 149-141 P/ 1 md. de tom. / Power Outlet Cover
Cx. de Tomada LUME 2x70 p/ Piso Elevado Monoltico
LUME Cavity Floor Box 3x70 - Monolithic Raised Floor System
A caixa e os suportes de tomadas so
fabricados em chapa pr galvanizada a
fogo. A tampa confeccionada em alumnio
fundido, com acabamento superior. A caixa,
tampa e suportes, devem ser especificados
separadamente.
The socket box and sup ports are manufactured Quadro/Tampa de alumnio LUME
in hot-dip pre-galvanized plate. The cover is LUME Frame and Cover in Aluminium
manufactured in cast aluminum with high quality Dim. Externa 241 x 241 mm
finishing. The box, the cover and supports shall be External dim.
specified separately. Dim. Revestimento 184 x 150 mm Caixa de Tomada LUME
Possui furos de acesso 14mm nas laterais, Coating dim p/ Piso Monoltico
protegidos com passa cabos de borracha. Dim. Rasgo Placa 215 x 215 mm LUME Cavity Floor Box (monolithic floor)
Dim. of Plate Tear.
It has 14mm side access holes protected by rubber 168-112
cable-entry. 165-22-TB
Suportes Pintados p/ Caixas de Tomada LUME 2x70 Alt. 56mm
Painted Outlet Plates for LUME 2x70 Floor Boxes Hgt. 56mm
58
Pode ser instalada em piso monoltico de espessura mnima de 70mm, no tendo restries
P/ 3 Tomadas de Energia P/ 6 Tomadas Tipo RJ
para espessuras maiores.
3 Power Outlet Plate 6 Data Outlet Plate
It can be installed in monolithic floor with minimum width of 70mm.There is no restrictions
149-0395-56-PR 149-212-56-PR
for larger widths.
Uso na extremidade da caixa 3 6 furos 14,7x19,3mm -
furos - sem tomada (vazio) sem tomadas (vazio)
Used at the edge of the box 6 Outlets 14,7x19,3mm without
3 outlets without sockets (empty) sockets (empty)
Tomadas de Energia
Power Socket
Referncia/Ref. N Descrio/Description Cor /Color
149-123-BR 10A-250V Branca/White
149-123-VM 10A-250V Vermelha/Red
149-124-BR 20A-250V Branca/White
149-124-VM 20A-250V Vermelha/Red
Tampes para Suportes de Tomadas
Power and Data Outlet Cover
Referncia/Ref. N Descrio/Description Furo (mm)/Hole
149-21 P/ tomada RJ/ Data Outlet Cover 14,7 x 19,3
Corte da caixa 2x70, instalada em piso elevado monoltico, com paviflex / carpete e granito.
Cross-section of the 2x70 cavity floor box installed in a monolithic raised floor system w/ Paviflex, carpet and granite. 149-141 P/ 1 md. de tom. / Power Outlet Cover
Caixas de Tomadas STD p/ Piso Elevado em Placas
Quadro / Tampa de Alumnio STD
STD Cavity Floor Box - Raised Floor System
STD Frame and Cover in Aluminium
Caixa/Box Ref./Box Dim. Externa Dim. Revest. Dim. Rasgo Placa
So fabricadas em chapa pr External Dim. Coating Dim Plate Tear. Dim.
galvanizada a fogo e tampa em
alumnio polido com friso superior. 2x70 145-21-TB 173x197 110x158 151x176
As caixas, tampas e suportes, devem 3x70 145-22-TB 243x197 181x158 222x176
ser especificados separadamente.
Suportes Pintados p/ Caixas de Tomada STD 2x70
Manufactured in hot-dip pre-galvanized Painted Outlet Plates for STD 2x70 Floor Boxes
plate and cover in polished aluminum
with upper frieze. The floor boxes,
covers and supports must be specified
separately.
P/ 3 Tomadas de Energia P/ 4 Tomadas Tipo RJ
3 Power Outlet Plate 4 Data Outlet Plate
149-0355-PR 149-12-PR
3 furos - sem tomada (vazio) 4 furos 14,7x19,3mm - sem tomadas (vazio)
3 outlets without sockets (empty) 4 Outlets 14,7x19,3mm w/out sockets (empty)
Suportes Pintados p/ Caixa de Tomada STD de 3x70
Painted Outlet Plates for STD 3x70 Floor Boxes
59
Tomadas de Energia
Power Socket
Referncia/Ref. N Descrio/Description Cor /Color
149-123-BR 10A-250V Branca/White
149-123-VM 10A-250V Vermelha/Red
149-124-BR 20A-250V Branca/White
149-124-VM 20A-250V Vermelha/Red
Tampes para Suportes de Tomadas
Caixa Tomada STD 2x70 p/ Caixa Tomada STD 3x70 p/ piso Power and Data Outlet Cover
piso elevado em placas elevado em placas
2x70 STD Cavity Floor Box
3x70 STD Cavity Floor Box Referncia/Ref. N Descrio/Description Furo (mm)/Hole
149-21 P/ tomada RJ/ Data Outlet Cover 14,7 x 19,3
147-11-PR 147-12-PR 149-141 P/ 1 md. de tom. / Power Outlet Cover
Cx. de Tomada Redonda p/ Piso Elevado em Placas Caixa de Sada para Piso Elevado em Placas
Grommet Floor Box for Raiser Floor System Grommet Junction Box for Raiser Floor System
As caixas so fabricadas em Nylon preto./Boxes manufactured in black nylon. As caixas so fabricadas em Nylon preto./Boxes manufactured in black nylon.
Tampa de encaixe.
Sapata p/ fixao Snap-in Cover
Tampa de encaixe.
na placa de piso. Snap-in Cover
Permite que a caixa
seja utilizada em Corpo superior.
placas com espessura Upper body
mnima de 15 mm e
mxima de 50 mm.
Attachment shoe over the
Sapata p/ fixao
raiser floor. It allows for
the floor box to be used na placa de piso.
with plates with minimum Corpo superior. Permite que a
width of 15 mm and max. Upper body caixa seja utilizada
width of 50 mm. em placas com
espessura mnima
de 15 mm e mxi-
ma de 50 mm.
Attachment shoe
over the raiser floor.
60 It allows for the floor
box to be used with
plates with minimum
width of 15 mm and
max. width of 50 mm. Caixa de Sada Redonda
04 furos 3/4.
p/ piso elevado em placas
No incluso
Grommet Junction Box for raised floor
conectores p/
eletroduto. Corpo inferior: 148-40
Separao fsica do
04 3/4 holes.
cabeamento de lgica/
Connector for Caixa de Tomada Redonda: Caida de Sada Redonda:
electroductes telefonia e energia.
Grommet Floor Box: Grommet Junction Box:
not included. Inner body:
Physical separation of the
data and power cabling
Reservamo-nos o direito de fazer alteraes a qualquer tempo, sem prvio aviso. Direitos reservados. proibida a reproduo parcial ou total desta publicao, sem autorizao da MOPA Ind. e Com. Ltda.
We reserve the right to make changes at any time without notice. Rights reserved. Reproduction of all or part of this publication without permission of the MOPA Ind. e Com. is prohibited.