Escolar Documentos
Profissional Documentos
Cultura Documentos
ISO/CD 2398 – Rubber hoses, textile-reinforced, for compressed air – Specification. Raio de Dobragem
ISO 2398:2006 – Rubber hoses, textile-reinforced, for compressed air – Specification. Classificação de Mangueiras
ISO 3994:2014 – Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction Tipo de Aplicação
and discharge of aqueous materials – Specification.
Sector de Actividade Servido
ISO 4023:2009 – Rubber hoses and hose assemblies for steam — Test methods.
Pressão de Serviço
ISO 4080:2009 – Rubber and plastics hoses and hose assemblies — Determination of permeability to
gas. Processo de Construção
ISO 4641:2010 – Rubber hoses and hose assemblies for water suction and discharge – Specification. Tipo de Reforço
ISO 4671:2007 – Rubber and plastics hoses and hose assemblies — Methods of measurement of the Tipo de Extremidade
dimensions of hoses and the lengths of hose assemblies.
O Projecto de Mangueiras
ISO 4671:2007/Amd 1:2011 – Clarification of position at which outside diameter is measured.
Factores de Segurança
ISO/DIS 5774 – Plastics hoses — Textile-reinforced types for compressed-air applications –
Specification. O Fabrico de Mangueiras
ISO 6224:2011 – Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Voltar a Borracha
Specification.
ISO 6802:2005 – Rubber and plastics hoses and hose assemblies with wire reinforcements —
Hydraulic impulse test with flexing.
ISO/CD 6802 – Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic
impulse test with flexing.
ISO 6803:2008 – Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test
without flexing.
ISO/CD 6803 – Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test
without flexing.
ISO/CD 7233 – Rubber and plastics hoses and hose assemblies — Determination of resistance to
vacuum.
ISO 7233:2006 – Rubber and plastics hoses and hose assemblies — Determination of resistance to
vacuum.
ISO 7326:2006 – Rubber and plastics hoses — Assessment of ozone resistance under static conditions.
ISO/CD 7326 – Rubber and plastics hoses — Assessment of ozone resistance under static conditions
https://www.ctborracha.com/normas-para-mangueiras/ 1/3
04/05/2019 Normas para Mangueiras | Ciência e Tecnologia da BorrachaCiência e Tecnologia da Borracha
ISO/CD 7751 – Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to
maximum working pressure.
ISO 7751:1991 – Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure
to maximum working pressure.
ISO 8030:2014 – Rubber and plastics hoses — Method of test for flammability.
ISO 8031:2009 – Rubber and plastics hoses and hose assemblies — Determination of electrical
resistance and conductivity.
ISO 8032:1997 – Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test
(half-omega test).
ISO 8033:2006 – Rubber and plastics hoses — Determination of adhesion between components.
ISO/CD 8033 – Rubber and plastics hoses — Determination of adhesion between components.
ISO 8308:2006 – Rubber and plastics hoses and tubing — Determination of transmission of liquids
through hose and tubing walls.
ISO/DIS 8308 – Rubber and plastics hoses and tubing — Determination of transmission of liquids
through hose and tubing walls.
ISO 8330:2014 – Rubber and plastics hoses and hose assemblies – Vocabulary.
ISO 8331:2014 – Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use
and maintenance.
ISO/CD 8331 – Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use
and maintenance.
ISO 10619-1:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness
— Part 1: Bending tests at ambient temperature.
ISO 10619-2:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness
— Part 2: Bending tests at sub-ambient temperatures.
ISO 10619-3:2011 – Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness
— Part 3: Bending tests at high and low temperatures.
ISO 10960:1994 – Rubber and plastics hoses — Assessment of ozone resistance under dynamic
conditions.
ISO 12151-1:2010 – Connections for hydraulic fluid power and general use — Hose fittings — Part 1:
Hose fittings with ISO 8434-3 O-ring face seal ends.
ISO 12151-2:2003 – Connections for hydraulic fluid power and general use — Hose fittings — Part 2:
Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings.
ISO 12151-3:2010 – Connections for hydraulic fluid power and general use — Hose fittings — Part 3:
Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends.
ISO 12151-4:2007 – Connections for hydraulic fluid power and general use — Hose fittings — Part 4:
Hose fittings with ISO 6149 metric stud ends.
ISO 12151-5:2007 – Connections for hydraulic fluid power and general use — Hose fittings — Part 5:
Hose fittings with ISO 8434-2 37 degree flared ends.
ISO 12151-6:2009 – Connections for hydraulic fluid power and general use — Hose fittings — Part 6:
Hose fittings with ISO 8434-6 60 degree cone ends.
ISO 17165-1:2007 – Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and
requirements.
ISO/TS 17165-2:2013 – Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose
assemblies.
ISO/TR 17784:2003 – Rubber and plastics hoses and hose assemblies — Guide for use by purchasers,
assemblers, installers and operating personnel.
https://www.ctborracha.com/normas-para-mangueiras/ 2/3
04/05/2019 Normas para Mangueiras | Ciência e Tecnologia da BorrachaCiência e Tecnologia da Borracha
ISO 18752:2014 – Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types
for hydraulic applications – Specification.
ISO/CD 19718 – Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for
hydraulic power units used in hydraulic tool applications – Specification
ISO 28702:2008 – Rubber and plastics hoses and tubing — Textile-reinforced types — Sub-ambient
temperature crush test.
ISO 30013:2011 – Rubber and plastics hoses — Methods of exposure to laboratory light sources —
Determination of changes in colour, appearance and other physical properties.
Autor | Materiais | Borracha | Proj. Artefactos | Processos | Referências | Sabia Que... | Contacto | Sitemap
Mário Caetano ® Copyright 2010-2019 |
https://www.ctborracha.com/normas-para-mangueiras/ 3/3