Escolar Documentos
Profissional Documentos
Cultura Documentos
3
Objetivos
(3 anos de IC – EM)
- sementes de alfa-SiC
- propriedades mecânica de SiC SFL
5
Breve histórico / formação acadêmica
- sementes de alfa-SiC
- propriedades mecânica de SiC SFL
6
Breve histórico / formação acadêmica
8
Breve histórico / formação acadêmica
9
Breve histórico / formação acadêmica
doi:10.1016/j.msea.2006.10.083
10
Breve histórico / formação acadêmica
11
Breve histórico / formação acadêmica
13
Breve histórico / formação acadêmica
14
Breve histórico / formação acadêmica
15
Breve histórico / formação acadêmica
16
Breve histórico / formação acadêmica
17
Breve histórico da formação acadêmica
18
Breve histórico da formação acadêmica
doi:10.1016/j.surfcoat.2011.01.053 19
Breve histórico da formação acadêmica
doi:10.1016/j.surfcoat.2011.01.053 20
Breve histórico / formação acadêmica
21
Breve histórico / formação acadêmica
24
Breve histórico / formação acadêmica
25
Breve histórico / formação acadêmica
26
Breve histórico / formação acadêmica
Parcerias: UNA, PY; UC, Pt; INT, RJ
Fonte:
Sim Implants
Fonte:
Formedica
Fonte: Micromedsystem
Fonte:
Cultura Mix
Fonte: BIOEDTECH
Fonte: Odontologiaimioni
Classificação:
• BENTO, C. A. S., Estudo da Interface Ti-6Al-4V/TiO2 por Microscopia Eletrônica de Varredura. 2000. 83 f. Dissertação (Mestrado em
Ciência e Engenharia de Materiais) - Universidade de São Paulo, São Carlos, 2000.
• BIGI, A.; BOANINI, E.; GAZZANO, M., Ion substitution in biological and synthetic apatites. In: APARICIO, C.; GINEBRA, M.-P.,
Biomineralization and Biomaterials, Woodhead Publishing, Boston, 2016, pp. 235-266.
• Biguetti, C. C. et al., Oral implant osseointegration model in C57Bl/6 mice: microtomographic, histological, histomorphometric and
molecular characterization. Journal of Applied Oral Science, v. 26, 2018.
• BRAM, M., et. al., High-porosity titanium, stainless steel, and superalloy parts. Advanced Engineering Materials, v. 2, pp. 196–199,
2000.
• BREME, J.; EISENBARTH, E.; BIEHL, V., Titanium and its Alloys for Medical Applications. In: Leyens, C.; Peters, M. Titanium an
Titanium Alloys: Fundamentals and Applications. Wiley-VCH. 2003. p. 423-451.
• de ANDRADE, M. C.; FILGUEIRAS, M. R. T.; OGASAWARA, T., Hydrothermal nucleation of hydroxyapatite on titanium surface. Journal
of the European Ceramic Society, v. 22, pp. 505-510, 2002.
• FOJT, J., et al., Corrosion behaviour of porous Ti–39Nb alloy for biomedical applications. Corrosion Science, v. 71, pp. 78–83, 2013.
• GRIZA, S. et al., Microstructure and mechanical properties of hot rolled TiNbSn alloys. Materials & Design, v. 56, pp. 200–208, 2014.
• GUO, Y. et al., On the mechanical properties of Ti-Nb based alloys. Journal of Alloys and Compounds, v. 571, pp. 25-30, 2013.
• HUANG, H.-H. et al., Surface nanoporosity of β-type Ti-25Nb-25Zr alloy for the enhancement of protein adsorption and cell
response. Surface and Coatings Technology, v. 259, pp. 206-212, 2014.
• JAYESH R. S.; DHINAKARSAMY V., Osseointegration. Journal of Pharmacy and Bioallied Sciences, v. 7, pp. S226-S229, 2015.
• KARAGEORGIOU, V., et al., Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials, v. 26, pp. 5474–5491, 2005.
• KAUSCHKE, V. et al., Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and
nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors. PLoS ONE, v. 13, pp. 1-19, 2018.
• KOKUBO, T., Apatite formation on surfaces of ceramics, metals and polymers in body environment. Acta Materialia, v. 46, pp. 2519-
2527, 1998.
• KUHN, L., Biomaterials. In: ENDERLE, J. e BRONZINO, J., Introduction to Biomedical Engineering. Elsevier. 2012. p. 219-271.
• LEYENS, C.; PETERS, M., Titanium an Titanium Alloys: Fundamentals and Applications. Wiley-VCH, 2003.
• LIU, Y.; HUNZIKER, E.B., Biomimetic coatings and their biological functionalization. In: LEÓN, B.; JANSEN, J.A., Thin calcium
phosphate coatings for medical implants. Springer Science + Business Media, New York, 2009.
• MARTINS, D. Q. et al., Solute segregation and its influence on the microstructure and electrochemical behavior of Ti-Nb-Zr alloys.
Journal of Alloys and Compounds, v. 478, pp. 111-116, 2009.
• MEDIASWANTI, K., et al., Powder metallurgy: a promising route for bone implants fabrication. High Temperature Processing
Symposium (Annals), Hawthorn, Austrália, 2012.
• METIKOS-HUKOVIC, M., et al., An in vitro study of Ti and Ti-alloys coated with sol-gel derived hydroxyapatite coatings. Surface and
Coatings Technology, v. 165, pp. 40-50, 2003.
• OH, I.H. et al., Mechanical properties of porous titanium compacts prepared by powder sintering. Scripta Materialia, v. 49, pp. 1197,
2003.
• OLIVEIRA, C. S. S. et al., Study of the porous Ti35Nb alloy processing parameters for implant applications. Powder Technology, v.
281, pp. 91-98, 2015.
• OLIVEIRA, Marize Varella. Processo para desenvolver revestimento de fosfato de cálcio em substratos de titânio. Depositante:
Instituto Nacional de Tecnologia. BR 10 2012 018314-5 A2. Depósito: 24 jul. 2012. Concessão: 02 set. 2014.
• OZAKI, T. et al., Beta Ti Alloys with Low Young’s Modulus. Materials Transactions, v. 45, pp. 2776-2779, 2004.
• PIERRE, C., Elaboration, caractérisation et étude des propriétés de revêtements bioactifs à la surface d'implants dentaires. 2018. 256
f. Tese (Doutorado em Ciências e Engenharia de Materiais) - Institut National Polytechnique de Toulouse, Toulouse, 2018.
• REY, C., et al., Physico-Chemical Properties of Nanocrystalline Apatites: Implications for Biominerals and Biomaterials. Materials
Science and Engineering C, v. 27, pp. 198-205, 2007.
• RIBEIRO, A. A. et al., Dense and porous titanium substrates with a biomimetic calcium phosphate coating. Applied Surface Science,
v. 265, pp. 250-256, 2013.
• ROCHA, M. N., Estudo de Revestimento de Fosfato de Cálcio em Substratos de Titânio Denso e Poroso. 2010. 114 f. Dissertação
(Mestrado em Engenharia Metalúrgica e de Materiais) - Universidade Federal do Rio de Janeiro, Rio de Janeiro, 2010.
• SHI, J. et al., Design and fabrication of graduated porous Ti-based alloy implants for biomedical applications. Journal of Alloys and
Compounds, v. 728, pp. 1043-1048, 2017.
• SILVA, L. M., Influence of heat treatment and oxygen doping on the mechanical properties and biocompatibility of titanium–
niobium binary alloys. Artificial Organs, v. 35, pp. 516–521, 2011.
• TOBIN, E. J., Recent coating developments for combination devices in orthopedic and dental applications: A literature review.
Advanced Drug Delivery Reviews, v. 112, pp. 88-100, 2017.
• TRUJILLO-DOMÍNGUES, C. et al., Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications.
Surface and Coatings Technology, v. 333, pp. 158-162.
• WILLIAMS, D. F., On the nature of biomaterials. Biomaterials, v. 30, pp. 5897-5909, 2009.
• XIONG, J. et al., Nanohydroxyapatite coating on a titanium–niobium alloy by a hydrothermal process. Acta Biomaterialia, v. 6, pp.
1584-1590, 2010.