Escolar Documentos
Profissional Documentos
Cultura Documentos
https://www.youtube.com/watch?v=FeMZV1e8rG0
I have no project
but if you want to do
if you can subscribe to my channel and share my videos I really appreciate it
try to mount following the video
- use distilled water
- today use electrolyte RCM is already self-cleaning, has on the free market, used
30ml for 1 liter of distilled water
- I used 316 stainless steel plates of 7.5cm by 1mm thickness for both poles and
neutral plates
- poles plates cut only from one side 6mm, the uncut side will be drilled a hole to
pass the 6mm screw rod
- neutral plates cut on both sides 6mm
- 6mm bolt-on rod and 316 stainless steel nuts
- 10 mm acrylic plates, the measurement is equal to the neutral plates, the
remaining part will make a hole on each side to pass the screw rod, and in the
center a 15mm hole to pass the hot water pipe.
- 10 inch water filter housing
- oring rings 2mm high, at the time of tightening reaches 1mm
- 28x15mm reduction bushing
- 15mm hot water pipe
Motor de esteira
Carregar bateria
Roda dagua motor Alterima gerador de energia eletrica