Escolar Documentos
Profissional Documentos
Cultura Documentos
The clamp coupling is originaly from America and is also available in the Type and codes
sizes en specifications according the EN 10357-A (DIN 11850-R2) range. Weld ferrule
This is described in the DIN 32676. Clamp
Ra value < 0,8µm
Dimension range and material Connection: weld (S). Other connections don’t meet a norm:
According EN 10357-A and DIN 11850-R2. Blind, hose connector, screw
According the norm you have to use forged materials
Seal
Tolerances and specifications &1%.
',. 7JUPO
)/#3
.72 TJMJDPOF
15'& 5FnPO
PS
DIN 405-1 and 2, DIN ISO 2768-1, ISO 48, FDA and BGA Envelope PTFE/EPDM.
52
SKS EN 10357-A (DIN 11850-R2)
54
SKS EN 10357-A (DIN 11850-R2)
55
SKS EN 10357-A (DIN 11850-R2)
56
SKS EN 10357-D (INCHES, SMS, BS)
The clamp coupling is an often applied coupling within the hygienic Ra surface
industry. But they are available in many different norms and tube sizes. H3: Ra < 0.8μm, standard W.St. 1.4404, optional is 1.4435 deliverable.
They all belong to other norm families.The most common norms are
represented in this documentation. The selected versions suit on the tube Connection
sizes mentioned in norm EN-10357 series D. (Inches) Butt-weld ferrule (S). Other connection types are not normalized: Blind,
hose ferrule, inside threaded and outside threaded.
ISO-2852 : based on the SMS sizes (ISO2037)
BS-4825-3 : based on the British Standard Seals
DIN-32676 : Inch sizes as in the ASME BPE (A-270) &1%.
',. 7JUPO
.72 TJMJDPOF
15'& 5FnPO
PS&OWFMPQF15'&&1%.
ASME BPE (A-270) : American inches as known in the pharmaceutical PTFE/FKM. 2 Types : Type A with lip and Type B without lip
industry.
Dutch inches : Inch sizes with 1.5mm wall thickness Certificates
The clamp couplings can deviate in flange diameter, tube diameter, gasket 3.1 certificate according EN 10204. The 2.1 of 2.2 are available for the Ra
groove diameter or angle of the flange. value or the composition of the stainless steel.
56
SKS EN 10357-D (INCHES, SMS, BS)
Q-Plus
WELDING FERRULE DIN 32676 KL SERIE C Superior range that fitts
Q-Plus
CLAMP FERRULE ASME 3A L14AM Superior range that fitts
57
SKS EN 10357-D (INCHES, SMS, BS)
GASKET CLAMPUNION
Inch A B C D E Kg NBR EPDM MVQ (Siliconen) FPM (Viton) PTFE (Teflon)
0,5" 10,6 21,8 0,005 18400599 18400574 18400524 18400549 18400499
0,75" 16,0 21,8 0,005 18400600 18400575 18400525 18400550 18400500
1" 23,1 50,5 0,005 18400604 18400579 18400529 18400554 18400504
1,5" 35,3 50,5 0,004 18400608 18400583 18400533 18400558 18400508
2" 48,0 64,0 0,005 18400610 18400585 18400535 18400560 18400510
2,5" 60,7 77,5 0,007 18400612 18400587 18400537 18400562 18400512
3" 72,3 91,0 0,009 18400614 18400589 18400539 18400564 18400514
4" 97,8 119,0 0,012 18400618 18400593 18400543 18400568 18400518
58
SKS EN 10357-D (INCHES, SMS, BS)
59