Escolar Documentos
Profissional Documentos
Cultura Documentos
(/MEMBERSHIP-LOGIN)
Search Location
(/)
(HTTPS://BIKEPACKING.COM/AUTHOR/NEZA-PETERCA)
COMPOR NEŽA PETERCA (HTTPS://BIKEPACKING.COM/AUTHOR/NEZA-PETERCA)
TEMPO JAN 15, 2018
COMENTÁRIO 83
Seja como for que você possa chamá-los, "sacos de ração", "sacos de lanche" ou
"sacos de comida", não há dúvida de que os sacos de caule são um dos acessórios
mais úteis para guardar lanches de trilha em movimento. Eles também são
adequados para carregar uma variedade de outros itens que você pode precisar à
mão - uma garrafa de água, telefone, óculos de sol, câmera compacta, lente
sobressalente, luvas ou até mesmo uma camada de roupa.
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_29.jpg)
Ê
COISAS QUE VOCÊ VAI PRECISAR
– 0,5 metro (20") de um tecido impermeável espesso (reciclei um colchão
inflável velho)
Este será o material externo da bolsa, portanto, você precisa que seja durável. Você pode usar
tecidos como: X-Pac, Cordura, Ripstop pesado, pato de lona encerado ou reciclar alguns de
seus equipamentos de acampamento antigos.
– 0,5 metro de material de forro (recomendo usar tecido sintético mais leve, de
preferência impermeável)
– 2 x Tampa de cabo
PASSO 1
Imprima este padrão PDF para download
(https://bikepacking.com/wp-content/uploads/2018/01/DIY-
stem-bag-pattern.pdf) em papel A4 (não redimensione!) e
corte-o.
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_4.jpg)
—–
PASSO 2
Corte as peças A, B e C de tecido impermeável mais espesso e
de tecido de forro.
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_3.jpg)
—–
PASSO 3
Corte a parte D do tecido ripstop leve, refletindo o padrão
sobre a linha tracejada.
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_2.jpg)
Estas são as partes que você deve ter depois de cortar todos os padrões nas quantidades dadas.
—–
PASSO 4
Primeiro costurar A + B + A juntos em seus lados mais longos e
deixar 1 cm (0,4") para fora antes de terminar o ponto (isso
facilitará a costura no fundo).
(https://bikepacking.com/wp(https://bikepacking.com/wp(https://bikepacking.com/w
content/uploads/2018/01/macontent/uploads/2018/01/macontent/uploads/2018/01/m
your-own-stem- your-own-stem- your-own-stem-
bag_10.jpg) bag_11.jpg) bag_12.jpg)
—–
PASSO 5
Aplico a fita de nylon de 27 cm de comprimento, apenas 2cm
(0,8") por baixo.
—–
PASSO 6
Aplique uma correia de 11 cm (4,3") de comprimento na parte C
no meio e costure em laços de 2,5 cm (1") sobre ela.
—–
PASSO 7
Costurar a parte restante do padrão B para a parte A + B + A,
que você costura no início.
(https://bikepacking.com/wp-content/uploads/2018/01/DIY-stem-bag.gif)
—–
PASSO 8
Costure na parte C (parte inferior).
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_9.jpg)
—–
PASSO 9
Siga o mesmo processo com o tecido de forro, dispensando a
aplicação de fitas.
—–
STEP 10
Now comes the draw cord closing top.
Fold the fabric on half and sew it as show on the picture. Leave a hole of approx. 2 cm (0.8″)
length in the middle, this will be the hole where the draw cord will exit.
(https://bikepacking.com/wp-
(https://bikepacking.com/wp-
content/uploads/2018/01/make-your-
content/uploads/2018/01/make-your- own-stem-bag_16.jpg)
own-stem-bag_15.jpg)
—–
STEP 11
Fold the two sides of the fabric apart and top-stitch them. Now
fold the fabric on half, so you have the cord exit hole on the top.
(https://bikepacking.com/wp-
content/uploads/2018/01/make-your-own-stem-
bag_5.jpg)
—–
STEP 12
Introduce the cord with the cord stopper through the hole and
make a knot at the end (you can do this at the end as well).
(https://bikepacking.com/wp-
content/uploads/2018/01/make-your-own-stem-
bag_6.jpg)
Insert the drawcord with the cord stopper through the hole. Make a knot at the end.
—–
STEP 13
Sew the D part on the outer part of the bag, facing downwards.
(https://bikepacking.com/wp-
content/uploads/2018/01/make-your-own-stem-
bag_7.jpg)
Sew on the drawcord closing part onto the outer body of the bag.
—–
STEP 14
Turn the lining inside out, and sew it on the outer body of the
bag and the drawcord part.
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_8.jpg)
The outer parts of body and lining should face each other before sewn together at the top.
—–
STEP 15
Turn the lining inside out, through that 5 cm (2″) hole you’ve
left open.
—–
STEP 16
Sew up the small hole.
(https://bikepacking.com/wp-
(https://bikepacking.com/wp-
content/uploads/2018/01/make-your-
content/uploads/2018/01/make-your- own-stem-bag_18.jpg)
own-stem-bag_17.jpg)
—–
STEP 17
Sew on a draw cord puller (you can skip it, but it’s handy
especially when riding with gloves).
(https://bikepacking.com/wp- (https://bikepacking.com/wp-
content/uploads/2018/01/make-your- content/uploads/2018/01/make-your-
own-stem-bag_19.jpg) own-stem-bag_20.jpg)
—–
STEP 18
Make 3 x velcro straps by cutting 3 x 8 cm (hook) and 3 x 8 cm
(loop) and face them together on the surface of 2 cm. Sew that
part with a ‘safety square’.
(https://bikepacking.com/wp- (https://bikepacking.com/wp-
content/uploads/2018/01/make-your- content/uploads/2018/01/make-your-
own-stem-bag_21.jpg) own-stem-bag_22.jpg)
NOTE: Length of the velcro straps depends on your stem and handlebar circumference.
—–
STEP 19
Make a safety draw cord for attaching the bag through the
loops of the D part onto the bike frame.
(https://bikepacking.com/wp- (https://bikepacking.com/wp-
content/uploads/2018/01/make-your- content/uploads/2018/01/make-your-
own-stem-bag_23.jpg) own-stem-bag_24.jpg)
—–
STEP 20
Voila! Now strap on the bag on your bike and you are ready to
go!
(https://bikepacking.com/wp-content/uploads/2018/01/make-your-own-stem-
bag_28.jpg)
(https://bikepacking.com/wp- (https://bikepacking.com/wp-
content/uploads/2018/01/make-your- content/uploads/2018/01/make-your-
own-stem-bag_26.jpg) own-stem-bag_25.jpg)
—–
If you have any questions about this tutorial feel free to ask!
Again, find more DIY articles at the MYOBG tag here (/tag/myobg/). In addition check
out our stem bag roundup (/gear/bikepacking-stem-bags/) from a couple years ago… and
check out a couple stem bag reviews such as the Revelate Mountain Feedbag and others at
the tag here (/tag/bikepacking-stem-bags/).
(/tag/myobg)
Please keep the conversation civil, constructive, and inclusive, or your comment will be removed.
82 Comments
1 Login
Name
Robert Tadlock − ⚑
6 years ago
Hi, thanks for this great pattern and tutorial! I made one of for myself using 1680 denier
ballistic nylon and ripstop:
⛺ View — uploads.disquscdn.com
1. In Step 4, you say "First sew together A + B + A together...", but your picture shows B +
A + B. I used the pictures, so no issue there, but I just wanted to share that.
2. For those needing a bit more clarity on steps 10 and 11, I took some pictures during
the process that might help. First, fold the fabric in half on the long side, then mark your
opening in the seam allowance. Sew till the first line and finish your stitch. Start at the
next mark and sew till the end of the fabric and then finish your stitch. It should look like
this after that step:
⛺ View — uploads.disquscdn.com
Next, press your seam open (I used an iron set for synthetic). Once you do that you're
going to sew your open seam down on either side of the first stitch Here's how it'll look
see more
9 0 Reply • Share ›
V
vanessa ditto > Robert Tadlock
− ⚑
2 years ago
Thank you!!! I was staring at the instructions trying to figure it out. This is super
helpful!
0 0 Reply • Share ›
B
Bnaya Livne > Robert Tadlock
− ⚑
5 years ago
l Sh
0 0 Reply • Share ›
0 0 Reply • Share ›
Josh Rizzo − ⚑
4 years ago
Just finished making a few of these for some friends. I took the above plan and made a
few modifications:
⛺ View — uploads.disquscdn.com
⛺ View — uploads.disquscdn.com
5 0 Reply • Share ›
JC
Joseph Charlton > Josh Rizzo − ⚑
3 years ago
1 0 Reply • Share ›
M
Max > Josh Rizzo
− ⚑
4 years ago
0 0 Reply • Share ›
Hey Max! Prior to sewing any of the panels together, I just cut out a
rectangular piece of mesh, sew some grosgrain ribbon to the top,
attach it to the panel along the sides and bottom panels (not the top
edge obviously), and then continue with sewing the panels together.
0 0 Reply • Share ›
really lovely! you can also use the spongy stuff you
sometimes get with packaging to make the bag sturdy. I
used one for a base when I copied this Tom Bihn bag
https://www.tombihn.com/col...
0 0 Reply • Share ›
M
Max > Josh Rizzo − ⚑
4 years ago
0 0 Reply • Share ›
Hey there! Where did you find the one hand open/close?
0 0 Reply • Share ›
Hey Andrea - It's called the Ravenox Cyberian Cord Lock and can be
found here: https://www.amazon.com/Cybe...
1 0 Reply • Share ›
Thanks so much!
0 0 Reply • Share ›
nagasaki45 − ⚑
4 years ago
Thanks so much for the pattern and tutorial! Also, some of the comments here were
also super useful. Here's my attempt, from a recycled academic paper :-)
First time sewing BTW.
⛺ View — uploads.disquscdn.com
3 0 Reply • Share ›
M
Mark − ⚑
4 years ago
I’m addicted to making these now and an old thermarest has seen new life on lots of
peoples bikes! Thank you so much for the inspiration and encouraging us to make rather
than just buy things
2 0 Reply • Share ›
Jay Waldon − ⚑
4 years ago
Thanks for this tutorial, gave me the confidence to try it out whilst the UK is on
lockdown. Managed to make it all out of old bags I no longer needed. Having never used
a sewing machine it was a steep learning curve. Here’s the results out on it’s maiden
voyage. ⛺ View — uploads.disquscdn.com
2 0 Reply • Share ›
Ross Davidson − ⚑
6 years ago
2 0 Reply • Share ›
0 0 Reply • Share ›
K
Kenzie − ⚑
2 years ago
I'll make another one with my liner fabric on the outer and my outer fabric as the liner. :)
1 0 Reply • Share ›
J
JO > Kenzie
− ⚑
7 months ago
Hi! Can you give some guidende on part 10-12. The folding is so confusing and
no matter how I fold the fabric is dosent look as the pictures. I just dont get it
haha
0 0 Reply • Share ›
AM
Audrey Michniak − ⚑
3 years ago
I am confused from steps 10-11. The pattern piece for D says 1 X 1/2 and after looking
at the picture I am confused on how much fabric to cut. Any advice is appreciated!
1 0 Reply • Share ›
F
Fabio − ⚑
3 years ago
Thanks a lot for the tutorial, I made a few cylindrical stem bags but they don't fit very
well on my bike. This model is much better! Next time I'll try to use nicer fabrics and add
a piece of mesh like Josh did.
Just a tip: I think an additional picture between step 11 and 12 (the top stitching from
the inside before folding up the fabric) would be really helpful It took me a while to
the inside before folding up the fabric) would be really helpful. It took me a while to
figure out what was going on there;)
1 0 Reply • Share ›
Jibzz − ⚑
4 years ago edited
Hi, thanks for the tutorial, and thanks for all the helpful tips in the comments section :)
Here is our piece of work, after spending roughly 3 hours cutting, sewing and thinking :
→ DIY stem bag — disq.us
1 0 Reply • Share ›
talesontyres − ⚑
5 years ago
I just made two of these. Super grateful for the free pattern and the great instructions.
However, it took me a loooong time to get the bottom sewn in.....I just couldn't figure out
how......Am I the only one? Argh
1 0 Reply • Share ›
NO! the bottom is really hard. (I'm a novice sewer), it took me 4 tries and it
looks good, but it's not great. This project required a bit of skill building which I
am thankful for. Thanks for the pattern and the step by step. AND your link to
the cord video. it was much easier than I thought getting that right.
0 0 Reply • Share ›
You're not the only one...I'm trying to figure it out now, haha.
0 0 Reply • Share ›
E
Ekaterina Mintel > Ephy Wheeler
− ⚑
4 years ago
Hey guys, did you figure it out?:) Could someone please explain the
step 8??? Many thanks!!!
0 0 Reply • Share ›
0 0 Reply • Share ›
Robert Tadlock − ⚑
5 years ago edited
I've made a few of these bags now using your pattern, but decided to come up with my
own pattern that has the same assembly instructions. The liner and shell are one piece
the bag has a square bottom. I also added a one handed open and close.
⛺ View — uploads.disquscdn.com
⛺ View — uploads.disquscdn.com
⛺ View — uploads.disquscdn.com
1 0 Reply • Share ›
P
Peter > Robert Tadlock − ⚑
3 years ago
Hey, looks like there is a Nalgene in there? I was wondering if the pattern will fit
these.
0 0 Reply • Share ›
0 0 Reply • Share ›
P
Peter > Robert Tadlock − ⚑
3 years ago
0 0 Reply • Share ›
Rapscallyvin − ⚑
6 years ago
1 0 Reply • Share ›
magunkutjan − ⚑
6 years ago
Nice bag! Nice work! It's good to know that somebody else is reading bikepacking.com
from Hungary. ;)
1 0 Reply • Share ›
G
Gregory Newland − ⚑
G 6 years ago
Can I get additional info on steps 10-12? I thought it was making sense as I read it buy
the picture on Step 12 really confuses me. Just directions of folds would help me out.
1 0 Reply • Share ›
1 0 Reply • Share ›
This made it clear, and in the actual process of sewing it was quite
simple
0 0 Reply • Share ›
J
JO − ⚑
7 months ago
Someone that can point me in the right direction or maybe update the guide a bit for
part 10-12, the text is so confusing and no matter how I fold the fabric, it just dosent
make sense or look right.
0 0 Reply • Share ›
0 0 Reply • Share ›
B
Bianca Anderson − ⚑
2 years ago
0 0 Reply • Share ›
Ryan Boeding − ⚑
2 years ago
y g
well well well, I see I am late the discussion! So, does sewing these types of fabrics
require a heavy duty sewing machine or does the basic machine suffice? I saw one at
the Goodwill for $20 I thought about grabbing.
0 0 Reply • Share ›
I
Issy Whit > Ryan Boeding
− ⚑
2 years ago
0 0 Reply • Share ›
0 0 Reply • Share ›
JK
John Kopp − ⚑
3 years ago
Quick question (I don't see anyone else having asked it). Can someone check the proper
dimensions of piece "A" for me? I have a standard U.S. printer and printed this on letter-
sized paper, both with the printer set to "A4" and to "letter." I just want to make a bag
that's not off by half an inch. Thanks!
0 0 Reply • Share ›
A
AmyS − ⚑
3 years ago
Loved this! Made a bag from used fabric, made it a bit bigger than the pattern, and
added mesh side pockets and a piece of plastic in the bottom to give it more structure
(b/c I made it bigger). Instructions a little hard to follow but love it!
0 0 Reply • Share ›
Very nice -- would love to see a photo if you have one handy...
0 0 Reply • Share ›
P
Peter − ⚑
3 years ago
Thank you! Done with 600d Nylon and Ripstop. It was super helpful to read through the
comments though.
0 0 Reply • Share ›
C O M PA R T I L H E I S S O
383
Obrigado antecipadamente por espalhar a palavra!
Like
(/join)
(http://www.instagram.com/bikepackingcom)
(http://www.facebook.com/bikepackingcom)
(https://youtube.com/bikepackingcom?
(http://www.twitter.com/bikepack
(https://bikepac
sub_confirmation=1)
© Copyright 2012-2023 BIKEPACKING.com LLC / all designs, photos & articles are
property of BIKEPACKING.com