Escolar Documentos
Profissional Documentos
Cultura Documentos
Atividade - 03 11 22
Atividade - 03 11 22
F.D.S. Curbelo, A.I.C. Garnica, E.A. Araújo, E.M. Paiva, A.G. Cabral, E.A. Araújo, J.C.O. Freitas
• Contextualization
• Objective
• Methodology
• Results and discussion
• Conclusion
3
Contextualization
4
Develop a pre-flush fluid :
• high efficiency;
• capability of wettability inversion
Objective • chemical properties compatible with the
drilling fluid and cement slurry;
5
Methodology
Fig 5. Wettability
Thermal Fluid compatibility inversion test
analysis test
6
Results and Discussion
Ternary phase diagram
System 1 : (50%, 45%, 5%) for (O, T80, W) System 2: (70%, 25%, 5%) for (O, NP150, W)
7
Results and Discussion
Rheological behavior Removal test for cleanup fluids
8
Results and Discussion
Wettability test
- Cleanup fluid 1 diluted: the total inversion was reached after mixing 3.0 × 10−5 m³ of the microemulsion in 2.0
× 10−4 m3 of drilling fluid, thus resulting in an apparent wettability of 15%;
- Cleanup fluid 2 diluted: the total inversion occurred after adding 7.6 × 10−5) of the microemulsion to 2.0 × 10−4
m3 of drilling fluid, thus indicating an apparent wettability of 38%.
9
Results and Discussion
The performance of cement slurries contaminated by pre-flush
The morphology of the mixed slurries is shown in Fig. 10. The compressive strengths of the cement slurries
contaminated with preflushes (system 1 and system 2) are shown in Fig. 11. 10
Results and Discussion
Compatibility test
Figs. 12 and 13 plot the viscosity as a function of shear rate for cement, mud, pure cleanup
fluid and mixtures of cement/cleanup fluid/mud for the cleanup fluids 1 and 2, respectively.
The cleanup fluids were formulated with the appropriate concentration of pine oil and
surfactant mixture. 11
Results and Discussion
Thermogravimetric analysis
Fig. 15 Thermal stability for glycerin, vegetable oil, nonionic surfactants: systems 1 and 2.
12
Conclusion
An oil vegetable-based microemulsion was formulated from pine oil and nonionic surfactants to be used as
cleanup (pre-flush) fluid.
its use was effective in the drilling fluid removal test, besides achieving fair thermal stability at reservoir
temperatures.
The two microemulsion systems were found to be very effective in inversion testing, water-wetting capacity,
as well as in compatibility with drilling fluid and cement slurry when exhibiting excellent cleaning power and
good compressive strength when additional pre-flushes in cement slurries.
13
References
14
THANK YOU!
evanice.medeiros@hotmaill.com
15