Escolar Documentos
Profissional Documentos
Cultura Documentos
2) A cylindrical rod of steel (E= 30X106 psi) having a yield strength of 310 MPa is
to be subjected to a load of (2500 lbf). If the length of the rod is 500 mm, what
must be the diameter (mm) to allow an elongation of 0.38 mm?
4) The following data were obtained during the stress-strain test of nicked
specimen:
a) Determine the following: (1) true stress at maximum load; (2) true fracture
stress; (3) true fracture strain; (4) true uniform strain;
(5) true necking strain; (6) ultimate tensile strength; Carga (N) Diâmetro (mm)
(7) strain-hardening coefficient. 0 6,4008
15301,88 6,35
15924,63 6,223
16324,97 6,096
5) Analise o gráfico abaixo. Sabendo-se que algumas 16502,9 5,969
propriedades 16547,38 5,842
mecânicas são importantes para especificação e 15880,15 5,1054
seleção de materiais 15568,78 5,08
e que AR >AQ>AP, onde AR , AQ e AP representam 14901,54 4,826
as áreas sob cada 14011,9 4,572
curva. Dessa forma, os materiais que possuem a 13122,25 4,318
maior tensão de ruptura, 12455,02 3,7846
o maior módulo de elasticidade, o maior limite de
escoamento e a melhor
tenacidade, respectivamente, são:
A) Q; P; R e Q.
B) Q; R; P e R.
C) Q; P; P e R.
D) R; P; P e Q.