Escolar Documentos
Profissional Documentos
Cultura Documentos
Parâmetros de soldadura
Welding Parameters
Passe de soldadura 1 n
Weld Run
Processo de Soldadura 141 - Manual
Welding Process
Eletrodo de tugnsténio EN ISO 6848: WTh20 - Ø 2,4mm
Tungsten electrode
Material de Adição EN ISO 14343-A: W 19 12 3 L
Filler Material
Diâmetro (mm) 1,6 / 2,0
Diameter (mm)
Fluxo/Gás Proteção / Protection: EN ISO 14175 - I1
Flux / Gas Purga / Backing: EN ISO 14175 N1
Débito (l/min) Proteção / Protection: 8 – 16
Flow rate (l/min) Purga / Backing: 8 – 16
Tipo de corrente (Polaridade) DCEN
Type of current (Polarity)
Intensidade de Corrente (A) 50 - 60 50 - 60
Current (A)
Tensão (V) 10,4 - 12,7 10,4 – 12,7
Tension (V)
Velocidade de Avanço (cm/min) 5,4 - 6,6 5,9 - 7,2
Welding velocity (cm/min)
Entrega Térmica (KJ/mm) 0,38 - 0,63 0,35 - 0,58
Heat-input (KJ/mm)
Modo de transferência --- ---
Transfer mode
Pré-aquecimento ( C) o
> 10 ---
Pre-heat temperature (oC)
Tempreratura de interpasse ( C) o
--- < 150
Interpass temperature (oC)
Os valores da entrega térmica indicados correspondem a uma variação entre menos e mais 25% dos valores provenientes do provete de teste de qualificação.
The values of heat input indicated correspond to a variation between less and more than 25% of the values coming from the qualification.