Escolar Documentos
Profissional Documentos
Cultura Documentos
Parâmetros de soldadura
Welding Parameters
Passe de soldadura 1 2
Weld Run
Processo de Soldadura 141 - Mecanizado
Welding Process
Eletrodo de tugnsténio EN ISO 6848: WTh20 - Ø 3,2mm
Tungsten electrode
Material de Adição EN ISO 14343-A: G 19 12 2 L Si
Filler Material
Diâmetro (mm) 1,0 / 1,2
Diameter (mm)
Fluxo/Gás Proteção / Protection: EN ISO 14175 - I1
Flux / Gas
Débito (l/min) Proteção / Protection: 10 – 20
Flow rate (l/min)
Tipo de corrente (Polaridade) DCEN
Type of current (Polarity)
Intensidade de Corrente (A) 170 - 210 180 - 220
Current (A)
Tensão (V) 13,5 - 16,5 14,4 - 17,6
Tension (V)
Velocidade de Avanço (cm/min) 22,5 - 27,5 18,0 - 22,0
Welding velocity (cm/min)
Entrega Térmica (KJ/mm) 0,41 - 0,68 0,57 - 0,96
Heat-input (KJ/mm)
Modo de transferência --- ---
Transfer mode
Pré-aquecimento (oC) ≥ 10
Pre-heat temperature (oC)
Tempreratura de interpasse ( C) o
--- ≤ 150
Interpass temperature (oC)
Os valores da entrega térmica indicados correspondem a uma variação entre menos e mais 25% dos valores provenientes do provete de teste de qualificação.
The values of heat input indicated correspond to a variation between less and more than 25% of the values coming from the qualification.