Escolar Documentos
Profissional Documentos
Cultura Documentos
Folha 1
300 N
250 N
1. Considere que o bloco da Figura 1 se encontra 20º
Consider the block shown in Figure 1 suspended from three cables that are subjected to the represented
tensile forces. Under these conditions, determine the value of the angle that the lateral cables should make
with the horizontal direction so that the resultant force is vertical. In addition, determine the magnitude of this
resultant force.
Página 1 de 3
3. A torre [AO] ilustrada na Figura 3 apoia-se no terreno no
ponto O e é sustentada por três cabos ligados no topo da torre
(ponto A) e ancorados no terreno nos pontos B, C e D. Admita
que a ação do vento sobre a torre exerce no ponto A uma força
vertical ascendente de 20kN. Nestas condições, determine as
forças FB, FC e FD exercidas em cada cabo que garantem que o
sistema esteja em equilíbrio.
força T1, que garantem que este sistema se mantém ainda assim em Figura 4
equilíbrio com o cabo [AO] horizontal.
The system represented in Figure 4 is in equilibrium and involves blocks B and C suspended from the
cables [AO] (horizontal), [OB] (vertical) and [ORC] that converge at point O. By knowing that the cable
[ORC] goes through a small frictionless pulley R and that the masses of B and C are 20kg and 40kg,
respectively, determine the tensile force developed by the 3 cables (T1, T2 and T3) and the angle that
guarantees the equilibrium of the system. In addition, determine the maximum mass of block B, and the
corresponding values of the angle and the tensile force T1 that ensure that this system remains in
equilibrium with the horizontal cable [AO].
Soluções
Solutions
1. = 66.1º; ||R|| = 802.27N
2. = 78.7º; ||T|| = 980.58N
3. FB = 9.43kN; FC = 6.85kN; FD = 7.21kN
4. T1 = 339.8N; T2 = 196.2N; T3 = 392.4N; = 30o
(mB)max = 40kg; T1 = 0 N; = 90o
Página 2 de 3
EXERCÍCIOS ADICIONAIS
Este conjunto de exercícios deverá ser resolvido desenvolvendo programas em Octave/Matlab, ou utilizando
o Excel.
This set of practice problems must be solved by developing programmes in Octave/Matlab, or by using
Excel.
5. Considere o bloco da Figura 1 suspenso pelos três cabos representados. Admitindo que o valor da força
do meio pode variar de 10N até 1000N, faça um gráfico que represente a evolução do valor do ângulo em
função do valor da força do meio, de modo a que a resultante das forças nos três cabos seja vertical.
Consider the block shown in Figure 1 suspended from the three cables that are represented. Assuming that
the value of the middle force can vary from 10N to 1000N, create a plot representing the evolution of the
value of the angle as a function of the value of the middle force, ensuring that the resultant force is vertical.
6. Considere o bloco representado na Figura 2, suspenso pelo cabo [CD] e pelo cabo [ACB] que atravessa
a roldana de dimensões reduzidas sem atrito em C. Admitindo que o ângulo que o troço [CB] do cabo faz
com a direção vertical pode variar entre 0º e 90º, faça um gráfico que represente a evolução da amplitude
da força T transmitida pelo cabo [CD] e do ângulo que esse cabo terá de fazer com a horizontal de forma
a assegurar o equilíbrio do sistema.
The block shown in Figure 2 is suspended from cables [CD] and [ACB], and the latter passes through a
small frictionless pulley. Assuming that the angle of segment [CB] of the cable with respect to the vertical
direction can vary between 0º and 90º, create a plot representing the evolution of the magnitude of the
tensile force T applied by the cable [CD] as a function of the angle the cable makes with the horizontal
direction in order to ensure the equilibrium condition.
7. Considere a torre [AO] ilustrada na Figura 3 sustentada pelos três cabos indicados. Admita que a ação
do vento sobre a torre exerce no ponto A uma força no plano oxz de 20kN, cuja direção faz um ângulo
com o eixo ox que pode variar entre 0º (força horizontal com o sentido positivo do eixo ox) e 180º (força
horizontal com o sentido negativo do eixo ox). Assuma que a coordenada da força no eixo oz é sempre
não negativa. Nestas condições, faça um gráfico que represente a evolução das forças FB, FC e FD em
função do ângulo da força do vento.
The tower [AO] shown in Figure 3 is stabilised by the three cables that are represented. Assume that the
wind action on the tower exerts a force of 20kN at point A whose direction along the plane oxz can have an
angle with the horizontal direction that can vary from 0º (in this case the force is horizontal and positive
according to axis ox) to 180º (in this case the force is horizontal and negative according to axis ox). Assume
also that the force component along axis oz is always non-negative. Under these conditions, create a plot
representing the evolution of the forces FB, FC and FD as a function of the angle of the wind force.
Página 3 de 3