Escolar Documentos
Profissional Documentos
Cultura Documentos
www.ims.ind.br
ims@ims.ind.br
Ateno
Voc est utilizando um equipamento que trabalha com tenses
elevadas, a ateno total primordial para a sua segurana. antes
de iniciar a instalao do equipamento, leia atentamente todas as
instrues contidas neste manual. em caso de dvida favor entrar
em contato conosco.
IMS Solues em Energia Ltda.
www.ims.ind.br
ims@ims.ind.br
Fone: (51) 3382.2300
INDICE
1. APRESENTAO DO SMART CAP 485..................................6
2. Caractersticas Tcnicas................................................................6
3. DESCRIO FSICA..................................................................7
3.1. Painel Frontal.........................................................................7
3.2. Painel Traseiro.......................................................................8
4. INSTALAO...........................................................................10
4.1. Alimentao.........................................................................10
4.2. Esquema de Ligao das Entradas.......................................11
4.3. Esquema de Ligao das Sadas...........................................14
5. SIMBOLOGIA............................................................................15
6. BLOQUEIO DO TECLADO......................................................15
7. PROGRAMAO.....................................................................16
8. MODO DE OPERAO............................................................17
8.1. Modo automtico ( Default )................................................17
8.2. Modo Manual.......................................................................17
8.3. Utilizao das Teclas de Programao.................................18
9. MENU PROGRAMAO.........................................................19
9.1. TP/TC, Tipo de Ligao e N de Elementos........................19
9.2. Modo de Controle................................................................20
9.3.Acionamento Manual dos Bancos de Capacitores................20
9.4. Zerando os Registros de Nmeros de Comutaes..............21
9.5.Programao da Faixa de Controle.......................................21
9.6. Programao de Parametro de Controle dos Bancos...........21
9.7.Habilitao das Sadas..........................................................24
9.8.Configurao do Banco de Capacitores................................24
9.9.Alarmes.................................................................................24
9.10. Comunicao Serial...........................................................25
9.11. Harmnicas........................................................................25
9.12. Habilitao do Filtro de THD............................................25
10. SUPERVISO / MONITORAO.........................................25
10.1. Fator de Potncia...............................................................26
10.2. Tenses...............................................................................27
SMART CAP 485
10.3. Correntes............................................................................27
10.4. Valores Totais (Trifsicos).................................................27
10.5. Potncias............................................................................27
10.6. Thd e Harmnicas..............................................................28
10.7. Freqncia:.........................................................................28
10.8. Nmero de Comutaes ....................................................28
11. SOLUO DE PROBLEMAS................................................29
TERMO DE GARANTIA..............................................................30
TERMO DE VALIDADE DE CALIBRAO IMS.....................31
RELATRIO ASSISTNCIA TCNICA.................................32
ENGLISH........................................................................................33
1. PRESENTATION OF THE SMART CAP 485.........................34
2. TECHNICAL CHARACTERISTICS.........................................34
3. PHYSICAL DESCRIPTION......................................................35
3.1. FRONT PANEL...................................................................35
3.2. BACK PANEL.....................................................................36
4. INSTALLATION........................................................................38
4.1. FEEDING.............................................................................38
TN...............................................................................................39
4.2. INPUTS CONNECTION SCHEME...................................39
4.3. OUTPUTS CONNECTION SCHEME...............................42
NT...................................................................................................43
5. SYMBOLOGY...........................................................................43
6. KEYBOARD BLOCKADE........................................................44
7. PROGRAMMING.....................................................................44
8. OPERATION MODE ............................................................45
8.1. AUTOMATIC MODE ( Default ).......................................45
8.2. MANUAL MODE...............................................................46
8.3. PROGRAMMING KEYS UTILIZATION.........................46
9. PROGRAMMING MENU.........................................................47
9.1. PT/CT, CONNECTION TYPE AND N OF ELEMENTS. 47
9.2. CONTROL MODE..............................................................48
9.3. MANUAL ACTUATION OF THE CAPACITORS BANKS
.....................................................................................................48
SMART CAP 485
2. CARACTERSTICAS TCNICAS
- Controlador de fator de potncia monofsico (1 elemento de medio) ou trifsico (2
ou 3 elementos de medio) ligao delta ou estrela;
- Modo de Operao: automtico ou manual;
- Medidor para ligao direta:
1. Entrada de corrente: 0,05 a 5A, atravs de TC interno;
2. Entrada de tenso da medio: 50 a 500Vca, alta impedncia;
- Medio trifsica de V, I, W, VA, Var, THD de tenso e Fator de Potncia
- Velocidade de Comunicao programvel em 9600, 19200 e 38400 bits por segundo;
- Uma porta serial RS485;
- Protocolo de comunicao serial MODBUS RTU;
- Caixa em material noryl resistente ao calor,
- Dimenses (AxLxP): 144x144x86mm
- Recorte do Painel (AxL): 1x1mm
- Grau de Proteo Frontal: IP40 como padro e IP54 sob consulta.
- Peso: 940g
- Temperatura de Operao: 0 a 55C
- Temperatura limite para armazenamento e transporte: -25 a 75C
- Mostrador digital: display de cristal lquido de 20 colunas por 2 linhas com "backlight"
(40 caracteres);
- Entrada de tenso de Alimentao: 90 a 270Vca;
- Freqncia: 45 a 65Hz;
- Nmero de estgios: at 12 acionamentos;
- Capacidade de acionamento de cada estgio: 105VA, 250V.
- Alarme: 1 sada com capacidade para 105VA, 250V;
- Consumo: 10VA
SMART CAP 485
3. DESCRIO FSICA
Este captulo apresenta a descrio do Smart Cap 485 em suas caractersticas fsicas
com todos os componentes, bem como suas funes.
PO WE R FA CTOR CO NTROLLE R
f1
f4
VV
W
W
A
A
PF
PF
THD
THD
f2
f3
f0
0 1 60 03 7 E
Para mudar de tela pressione a tecla desejada, para ativar a segunda funo pressione
a tecla seguida da tecla de funo desejada.
f1
f2
V
V
Visualizar corrente.
PF
PF
f4
f3
W
W
THD
THD
f0
IMPORTANTE:
Tenso Mxima de Alimentao: 270Vca.
3.2.2. CONECTOR DA COMUNICAO SERIAL RS485
Nos bornes indicados por D+ e D- feita a conexo com a rede de equipamentos
(RS485). Verificar a polaridade correta do cabo, quando for feita a ligao. A conexo do
borne do aterramento (GND) geralmente no necessria.
IMPORTANTE:
A corrente, neste conector, no deve ultrapassar 5A.
IMPORTANTE:
A tenso entre fases, neste conector, no deve ultrapassar a 500Vca.
4. INSTALAO
Antes de instalar o Smart Cap 485, certifique-se de que todos os requisitos para sua
instalao esto atendidos.
- Tipo de ligao a ser utilizada;
- TPs ou TCs necessrios;
- Banco de capacitores adequados;
- Fases do sistema eltrico corretamente identificadas, instalaes eltricas e
aterramento do sistema em perfeitas condies.
O Smart Cap 485 deve ser instalado em uma caixa ou painel que possua vedao
completa contra poeira e respingos de gua. Esta caixa ou painel tambm deve proteg-lo
contra choques mecnicos, vibraes e altas temperaturas.
4.1. ALIMENTAO
O conector da entrada de alimentao permite a ligao com uma tenso de 90 a
270Vca a freqncia de 45 a 65Hz. Esta ligao somente para a alimentao do
equipamento. O aterramento do equipamento tambm feito neste conector.
O Smart Cap 485 no possui um boto POWER ON, ligado no momento em que
alimentado.
Evite ligar as bobinas de acionamento das contatoras na mesma fase de alimentao,
isto evita interferncias sobre o circuito do equipamento.
10
11
12
13
14
5. SIMBOLOGIA
On:
Off:
Disabled:
F1,...,F6:
FP:
V:
A:
W:
VA:
VAr:
Hz:
i:
c:
%:
N:
AC e AC:
V1,V2 e V3:
I1, I2 e I3:
A:
C:
1 a 12:
:
6. BLOQUEIO DO TECLADO
Esta opo bloqueia o uso do teclado.
Para bloquear ou desbloquear o teclado pressione a tecla F0 seguida da tecla F4.
Enquanto o teclado estiver bloqueado exibido o smbolo de uma chave no canto
superior direito do display, e pressionando qualquer tecla diferente da tecla F0 ser exibida
a mensagem de teclado protegido.
15
7. PROGRAMAO
Quando o Smart Cap 485 estiver devidamente instalado no painel, e antes de
permitir que os bancos de capacitores sejam acionados, deve ser feita a sua programao
para configurar os parmetros da rede eltrica em que ele deve corrigir o fator de potncia,
e tambm os parmetros dos bancos de capacitores instalados. Estes dados devem ser
corretamente configurados no equipamento, pois todos os clculos que o Smart Cap 485
faz so baseados neles, logo uma especificao incorreta pode ocasionar um mal
funcionamento do equipamento acarretando em multas.
Existem 3 etapas de programao:
Parmetros da rede eltrica e alarmes (ver item 9.1 e 9.9);
Parmetros dos bancos de capacitores (ver item 9.8);
Habilitao do clculo de harmnicas (ver item 9.11).
O Smart Cap 485 sai de fbrica com os seguintes parmetros programados (default):
PARMETRO
PROGRAMAO
DE FBRICA
LIMITE MNIMO
LIMITE MXIMO
PRIMRIO DO TP
127 Volts
50 Volts
500000 Volts
SEC. DO TP
127 Volts
50 Volts
500 Volts
PRIMRIO DO TC
5A
1A
65000 A
SEC. DO TC
5A
1A
5A
FAIXA DE FP
0,92i a 0,80c
0,50i
0,50c
TEMPO DE
ENTRADA DOS
CAPACITORES
10s
1s
1200s
TEMPO DE SADA
DOS
CAPACITORES
10s
1s
1200s
KVAr Imin
999,9kVAr
CAPACITORES
CORRENTE
MINIMA
6 ou 12
12
0,5A
50% do Primrio do TC
PARMETRO
HABILITA ALARMES
ALARME DE TENSO MXIMA NO SECUNDRIO
ALARME DE TENSO MNIMA NO SECUNDRIO
ALARME DE CORRENTE MXIMA NO SECUNDRIO
ALARME DE CORRENTE MNIMA NO SECUNDRIO
SMART CAP 485
PROGRAMAO DE
FBRI
CA
off
sem alarme
sem alarme
sem alarme
sem alarme
16
sem alarme
sem alarme
sem alarme
automtico
estrela
trs
19200 bps
1
total
off
off
8. MODO DE OPERAO
Logo que ligado o Smart Cap 485 entra em operao mostrando o modelo do
equipamento e a verso de software. A tela inicial mostra o fator de potncia da fase de
controle e o modo de controle Auto ou Manual. Neste ponto o equipamento fica em
contnuo processo de medio e clculo.
17
18
9. MENU PROGRAMAO
Neste modo so programados os parmetros de funcionamento do equipamento.
A forma de programao de todos os itens como descrita no item 8.3. salvo
especificados.
Neste modo, se nenhuma tecla for pressionada o equipamento retorna ao modo
supervisor aps 20 segundos.
A programao pode ser feita diretamente pressionando F0 e F1 e selecionando o
menor que deseja alterar, ou seqencialmente, conforme a seguir.
A tecla "F4" retorna ao modo supervisor.
19
20
21
IMPORTANTE: o valor de potncia reativa mnima deve ser configurado com um valor
igual potncia reativa de um dos bancos de capacitores, ou a um valor igual a soma das
potncias de alguns dos bancos.
Pressione as setas para ajustar o valor da potncia reativa para a corrente mnima e
pressione F1 para confirmar a alterao.
22
23
9.9.ALARMES
Para programar os alarmes:
Tecle (On) e confirme teclando F1 e ir aparecer a tela abaixo
24
9.11. HARMNICAS
V para a tela abaixo utilizando a tecla F1 e as setas
Ento use as setas para habilitar (On) ou desabilitar (Off) o clculo de harmnicas de
tenso e pressione F1 para confirmar.
Desabilitando o clculo de harmnicas a velocidade do Smart Cap 485 aumenta. Este
procedimento pode ser til quando deseja-se atualizaes mais rpidas dos valores
medidos e no h necessidade de medies das harmnicas.
Utilize as teclas para habilitar (On) ou para desabilitar (Off) e pressione a tecla F1
para confirmar
Existem instalaes em que recomendado utilizar um filtro de harmnicas. Est
anlise feita por uma pessoa com capacidade tcnica e com equipamentos dedicados a
verificao
da
qualidade
da
energia
eltrica
disponvel
na
rede.
O filtro de harmnicas acionado apenas quando for necessrio fazer algum ajuste no fator
de potncia atravs de bancos de capacitores. Para atender esta eventual necessidade o
Smart Cap 485 possu a configurao "Prog. Filtro THD" que aps habilitado (On)
possibilita que a sada do acionamento de nmero 1 seja disponibilizada para acionamento
do filtro de harmnicas. Nesta configurao o filtro de harmnicas sempre vai ser instalado
utilizando a sada de acionamento 1, a qual ser o primeiro a ser acionado quando
necessrio (fator de potncia indutivo e fora da faixa programada de controle) e o ltimo a
ser retirado (fator de potncia capacitivo e fora da faixa programada de controle).
25
26
10.2. TENSES
Pressionando V ser mostrado a tela com as medies de tenso por fase e tambm o
tipo de ligao (delta ou estrela).
Esta tela mostra os valores monofsicos da tenso, corrente e fator de potncia quando
programado com 1 TC.
10.3. CORRENTES
Pressionando A ser mostrado a tela com as medies de corrente por fase.
Esta tela mostra os valores monofsicos da tenso, corrente e fator de potncia quando
for programado 1 TC.
10.5. POTNCIAS
Pressionando W ser mostrado a tela com as medies trifsicas de potncia (Wt),
potncia aparente total (VAt) e potncia reativa total (VArt).
Pressionando as setas e sero exibidas as telas com as medies de potncia por
fase.
27
10.7. FREQNCIA:
Pressionando THD novamente mostrado o valor da freqncia eltrica da rede.
28
29
TERMO DE GARANTIA
Prezado cliente,
Ao adquirir equipamentos da IMS voc tem a garantia por um ano, a partir da data da
emisso da nota fiscal, contra defeitos de fabricao.
Esta garantia compreende o conserto, incluindo peas e mo de obra, do equipamento.
Para utilizar nossa assistncia tcnica, o equipamento deve ser enviado para nossa
fbrica localizada no seguinte endereo:
IMS- Solues em Energia Ltda.
Assistncia Tcnica
Av. Bernardino Silveira Pastoriza, 720 Sarand
Porto Alegre RS CEP.: 91160-310
O equipamento dever ser enviado a IMS acompanhados de nota fiscal e do
RELATRIO ASSISTNCIA TCNICA. Para evitar danos de transporte sugerimos que o
equipamento seja cuidadosamente embalado, aconselhamos o uso da embalagem
fornecida pela IMS.
Nossa garantia no cobre despesas de transporte do equipamento.
Caso voc ache necessrio um atendimento em campo as despesas provenientes
desse atendimento sero debitadas ao usurio.
A IMS no se responsabiliza por problemas verificados em instalaes de clientes.
Sendo assim no sero cobertos valores referente a multas e penalizaes independentes
da origem das mesmas.
A garantia perde seu efeito quando:
Pelo decurso normal do prazo de validade.
Os equipamentos forem violados ou sofrerem alteraes sem autorizao por escrito
pela IMS.
O equipamento no for instalado seguindo as instrues deste manual.
Defeitos provocados por mau uso ou instalao inadequada dos equipamentos.
Danos ocasionados por agentes externos, tais como: inundaes, terremotos,
tempestades eltricas, problemas de rede eltrica de alimentao, vibraes excessivas,
altas temperaturas e quaisquer outros que estejam fora das condies de armazenamento,
transporte e uso deste equipamento.
A garantia no vlida para danos ocasionados a mquinas, processos e pessoal por
mau funcionamento deste equipamento.
A IMS no se responsabiliza por quaisquer outros termos de garantia que no os
expressos aqui.
No caso de dvida durante a instalao deste equipamento consulte nosso suporte
tcnico atravs:
E-mail: ims@ims.ind.br
Fone: (51) 3382.2300
Fax: (51) 3382.2301
30
31
UF:
)
FAX: (
E-MAIL:
CONTATO:
TRANSPORTADORA:
DADOS DO EQUIPAMENTO
EQUIPAMENTO:
NMERO DE SRIE:
DEFEITOS APRESENTADOS:
CAUSAS POSSVEIS:
32
ENGLISH
ATTENTION!
YOU ARE USING AN EQUIPMENT THAT WORKS WITH HIGH
VOLTAGES AND CURRENTS, THE TOTAL ATTENTION IS
PRIMORDIAL FOR YOUR SAFETY. BEFORE INITIATING THE
EQUIPMENT INSTALLATION, READ WITH ATTENTION ALL
THE INSTRUCTIONS CONTAINED IN THIS MANUAL. IN CASE
OF DOUBT PLEASE GET IN CONTACT.
IMS Solues em Energia Ltda
www.ims.ind.br
ims@ims.ind.br
Phone: +55 51 3382.2300
33
34
PO WE R FA CTOR CO NTROLLE R
f1
f4
VV
W
W
A
A
PF
PF
THD
THD
f2
f3
f0
0 1 60 03 7 E
To change the screen press the wished key, to enable the second function press the key
followed by the wished function key.
35
f1
f4
f4
f3
V
V
PF
PF
Visualize current.
W
W
W
W
Visualize powers
THD
THD
f0
36
IMPORTANT:
Feeding Maximum Voltage: 270Vca.
3.2.2. SERIAL COMMUNICATION CONNECTOR RS485
In terminals indicated by D+ and D- it is made the connection with the equipments net
(RS485). Verify the correct cable polarity, when the connection is made. The connection of
the earthing terminal (GND) generally is not necessary.
IMPORTANT:
The current, in this connector, should not surpass
5A.
37
IMPORTANT:
The voltage between phases, in this connector, should not
surpass 500Vca.
4. INSTALLATION
Before installing the Smart Cap 485, certify yourself that all the requisites for its
installation are attended.
- Type of connection to be used;
- Necessaries PTs or CTs;
- Adequates capacitors bank;
- Phases of the electric system correctly identified, electric facilities and earthing of the
system in perfect conditions.
The Smart Cap 485 should be installed in a box or panel that has complete sealing
against dust and water sprinkles. This box or panel also should protect it against mechanical
shocks, vibrations and high temperatures.
4.1. FEEDING
The feeding input connector allows the connection with a voltage from 90 to 270Vca the
frequency from 45 to 65Hz. This connection is only for equipment feeding. The equipment
earthing also is done in this connector.
The Smart Cap 485 does not have a button POWER ON, it is connected at the
moment in which it is fed.
Avoid connecting the contactors activating coils on the same feeding phase, this avoids
interferences on the equipment circuit.
38
TN
Alimentao 90 270 V AC = Feeding 90 to 270 V ac
TN
CORRENTE 0-5 A = CURRENT 0 5 A, BORNES = TERMINALS, TERRA = EARTH,
REDE = NET.
4.2.1. CURRENT SENSOR
Make sure that the CT's polarity is not inverted and its common is not connected for other
application. Also it is compulsory the connection in the correct order of the phase R (V1),
phase S (V2) and phase T (V3). Connect CTs to terminals as the side illustration.
Connection to three CT's:
SMART CAP 485
39
TN:
TENSO 50-500VAC = (Voltage 50-500Vac)
Bornes = Terminals
Rede = Net
Fase Neutro S/TP. Ligao estrela = Phase-Neutral w/PT. Star connection
4.2.2.2. PHASE NEUTRAL VOLTAGE SENSOR WITH PT
40
TN:
TENSO 50-500VAC = (Voltage 50-500Vac)
Bornes = Terminals
Rede = Net
Fase Neutro S/TP. Ligao estrela = Phase-Neutral w/PT. Star connection
4.2.2.4. PHASE PHASE VOLTAGE SENSOR WITH PT
TN:
TENSO 50-500VAC = (Voltage 50-500Vac)
Bornes = Terminals
Rede = Net
Fase Neutro S/TP. Ligao estrela = Phase-Neutral w/PT. Star connection
SMART CAP 485
41
TN:
TENSO 50-500VAC = (Voltage 50-500Vac)
Bornes = Terminals
Rede = Net
Fase Neutro S/TP. Ligao estrela = Phase-Neutral w/PT. Star connection
TN
Acionamento = Actuation, Comum = Common, Fase = Phase, Neutro = Neutral.
If possible, do not use the same phase for the device feeding and for contactors feeding
and install noise suppressors in contactors coils. The noise suppressor should be done as
contactor manufacturer specification, or in the case of not existing it can be a series RC
circuit (R=100ohm and C=0,1uF).
42
NT
Acionamentos = Actuations, Bornes = Terminals, Estagio n = Step, Alarme = Alarm, Comum
= Common.
5. SYMBOLOGY
On:
Off:
Disabled:
F1,...,F6:
FP:
V:
A:
W:
VA:
VAr:
Hz:
i:
c:
%:
N:
AC e AC:
V1,V2 e V3:
I1, I2 e I3:
A:
C:
1 a 12:
:
Arrows that indicate more screens inside a menu.
43
6. KEYBOARD BLOCKADE
This option blocks the keyboard use. To block or unblock the keyboard press the F0 key
followed by the F4 key.
While the keyboard is blocked it is exhibited the symbol of a key in the displays right
upper corner and pressing any different key from the key F0, it will be exhibited the message
of protected keyboard.
7. PROGRAMMING
When Smart Cap 485 is properly installed in the panel and before allowing that
capacitors banks are activated, it should be made its programming to setup the parameters
of the electric net in which it should correct the power factor and also the parameters of
installed capacitors banks. These data should be correctly setup in the equipment, because
all the calculations that Smart Cap 485 does are based in them, so an incorrect
specification can cause a bad equipment operation giving fines.
There are 3 programming stages:
Electric net and alarms parameters (see item 9.1 and 9.9);
Capacitors banks parameters (see item 9.8);
Harmonics calculation enabling (see item 9.11).
The Smart Cap 485 comes out of factory with the following programmed parameters
(default):
PARAMETER
FACTORY
PROGRAMMING
MINIMUM LIMIT
MAXIMUM LIMIT
PT PRIMARY
127 Volts
50 Volts
500000 Volts
PT SECONDARY
127 Volts
50 Volts
500 Volts
CT PRIMARY
5A
1A
65000 A
CT SECONDARY
5A
1A
5A
PF RANGE
0,92i to 0,80c
0,50i
0,50c
INPUT TIME OF
THE
CAPACITORS
10s
1s
1200s
OUTPUT TIME OF
THE
CAPACITORS
10s
1s
1200s
KVAr Imin
999,9kVAr
CAPACITORS
6 or 12
12
44
0,5A
PARAMETER
ENABLES ALARMS
MAXIMUM VOLTAGE IN THE SECONDARY ALARM
MINIMUM VOLTAGE IN THE SECONDARY ALARM
MAXIMUM CURRENT IN THE SECONDARY ALARM
MINIMUM CURRENT IN THE SECONDARY ALARM
ALARM OF PF max
ALARM OF PF min
ALARM OF Thd (V)
CONTROL MODE
TYPE OF CONNECTION
NUMBER OF MEASURING ELEMENTS
SERIAL COMMUNICATION SPEED
NET ADDRESS
CONTROL PHASE
HARMONICS CALCULATION
THD FILTER
50% of CT Primary
FACTORY
PROGR
AMMIN
G
off
without alarm
without alarm
without alarm
without alarm
without alarm
without alarm
without alarm
automatic
star
three
19200 bps
1
total
off
off
8. OPERATION MODE
As soon as connected the Smart Cap 485 gets in operation showing the equipment type
and the software version. The initial screen shows the power factor of the control phase and
the control mode Auto or Manual. At this point the equipment stays in continuous
measurement and calculation process.
45
46
TN
(Prog. PT/CT, Ligao = Connection , Confirmar = Confirm, Sair = Out)
These parameters show the voltage transformation relation. Value, max. 500kV and
min.50V.
TN
SMART CAP 485
47
TN
(Primario TC = Primary CT , Secund. TC = Secundary CT)
Program according to the equipment installation.
Type for connection in Delta and for star.
Type F1 to confirm and setup the connection type.
Using the keys and change the number of elements according to connection type, 3
or 2 CTs for the three phase facilities and 1 CT in case your facility is one phase. Type F1
to confirm.
TN
(Ligao: Estrela = Connection : Star , Elementos: 3TCs = Elements: 3 TCs)
48
TN
(Zerar Comutaes? = Zero Commutations ?, Confirma = Confirm, Sair = Out)
TN
(Prog. Faixa Controle = Prog. Control Range)
Setup PF's maximum value, after this type F1 to setup PF's minimum value and type F1
to confirm the values.
This control range setup is the used by Smart Cap 485 to put or withdraw capacitors
banks in the net, when it is working in automatic mode.
49
Control Parameter)
TN
Entrada = Input
The next screen setups input time of capacitors bank. This time is a delay in capacitors
bank activation when the value of the measured power factor is below the programmed
minimum value. It can be setup between 1 and 1200 seconds.
Press the arrows to adjust the input time value and press F1 to confirm the alteration.
OUTPUT TIME OF CAPACITORS BANK
TN
Saida = Out
Output time is a delay in capacitors bank disconnection when the measured value of the
power factor is above of programmed maximum value. It can be setup between 1 and 1200
seconds.
Press the arrows to adjust the input time value and press F1 to confirm the alteration.
The times of output and input of capacitors bank are useful parameters for the protection
and extending of the useful life of capacitors bank. These parameters affect only capacitors
banks activation when Smart Cap 485 is working on Automatic Mode.
MINIMUM REACTIVE POWER (KVAR IMIN):
The minimum reactive power (kVAr Imin) is a setup parameter that specifies which is the
reactive power that is going to be activated when the net current is very low (below the setup
minimum current value).
50
IMPORTANT: the value of minimum reactive power should be setup with a value equal
to the reactive power of one of the capacitors banks, or to a value equal to the sum of
powers of some of the banks.
Press the arrows to adjust the value of reactive power for the minimum current and press
F1 to confirm the alteration.
51
Press the arrows to adjust the value of the minimum current and press F1 to confirm the
alteration.
IMPORTANT: From firmware version 2.002 the parameter Imin is not any more
programmed from the secondary of CT and yes by the Primary, therefore, when changing
the primary of CT it will be automatically adjusted Imin.
This value of minimum current shown in the screen varies according to CT's relation and
its maximum value is equivalent to 50% of the CT primary.
CONTROL PHASE
The control phase setup establishes for Smart Cap 485 about witch power factor
measurement it should do the control, it could be by phase 1, 2, 3 or by the medium value of
the three phases.
TN
Fase Contrl.: = Control Phase
Press the arrows to establish the control phase and press F1 to confirm the alteration.
- control
- control
- control
- control
The possibility to do the power factor control through a pre-established phase is very
useful in not equilibrated electric facilities, causing a worse power factor in one of the three
phases. In this case the power factor control can be done on it.
52
TN
Prog. Saidas Capacit = Prog. Capacitors Outputs
Press the key to enable the wished output.
Press the key to disable the wished output.
Press F1 to confirm.
The number of active capacitors bank for the value alteration appears on the upper left
corner, and its respective drawing keeps blinking. Use the arrows to set the reactive power
value of respective capacitor bank, and press F1 to pass to the next bank. To change the
screen use F4.
The value of each capacitor bank can be setup in a value between range of 0,1kVAr and
999,9kVAr.
9.9. ALARMS
To program the alarms:
Key (Lig.) and confirm keying F1 and will appear in the below screen.
TN
Hab. Alarmes = Alarms enabling
The slider will be in the mx1 value.
53
TN
Ender. Rede = Net address , Vel. Serial = Serial speed
9.11. HARMONICS
Go to the screen below using the key F1 and the arrows
TN
Prog ThD Harmonicos = Prog. ThD Harmonics
Then use the arrows to enable (On) or to disable (Off) the voltage harmonics calculation
and press F1 to confirm.
Disabling the harmonics calculation the speed of Smart Cap 485 increases. This
procedure can be useful when it is wished faster updates of the measured values and there
is no need for harmonics measurements.
54
55
10.2. VOLTAGES
Pressing V it will be shown the screen with the voltage measurement per phase and also
the connection type (delta or star).
This screen shows the one phase values of the voltage, current and power factor when
programmed with 1 CT.
10.3. CURRENTS
Pressing A it will be shown the screen with the current measurements per phase.
This screen shows the one phase values of the voltages, current and power factor when
it is programmed 1 CT.
10.5. POWERS
Pressing W it will be shown the screen with the three phase measurements of power
(Wt), total apparent power (VAt) and total reactive power (VArt).
Pressing the arrows and it will be exhibited the screens with the power measurements
per phase.
56
10.7. FREQUENCY
Pressing THD again it is shown the net electric frequency value.
57
58
59
60
FU:
)
E-MAIL:
FAX: (
CONTACT:
TRANSPORTER:
EQUIPMENT DATA
EQUIPMENT:
SERIES NUMBER :
PRESENTED DEFECTS:
POSSIBLE CAUSES:
61