Escolar Documentos
Profissional Documentos
Cultura Documentos
Atividade Extensionista I
João Lucas Cerqueira Otto
IMPERATRIZ
2022
2
RESUMO
ABSTRACT
Garbage disposal is a growing and latent global problem, mainly of slowly degrading
materials. In recent decades, concerns about environmental impacts have become a
target of alert. In addition to economic growth, which has a direct impact on the
3
increase in the accumulation of garbage and waste, which in turn starts a cycle that
directly affects the Earth's Ecosystem, therefore, human life and health. When
evaluating the little knowledge of society and companies in knowing how to dispose
of garbage correctly, it was necessary to present companies such as Recimar
Ambiental, which operate in the collection and recycling market, and work specifically
with reverse logistics. Reverse Logistics is a tool developed by the National Solid
Waste Policy (PNRS), to guide post-consumer packaging to reuse or obtain energy.
In this report, a field research was carried out with the objective of presenting the
functioning of reverse logistics and how it occurs within the chosen company, which
is based on the collection, weighing, pressing and assembly to be taken by a carrier
to specialized points. in recycling each material. The work is divided into six sections,
the first being an introduction, the second the report of the methodology used in the
development of the work, the third the step by step of the development and the fourth
a presentation of the results obtained, the fifth the conclusion, the sixth are the
bibliographic references used in the research and development.
1 INTRODUÇÃO
2 METODOLOGIA
3 DESENVOLVIMENTO
Os tipos de materiais que são coletados na unidade são: metais ferrosos e não
ferrosos, alumínio (embalagens de desodorante vazias, latas e etc.) , bateria e cobre.
O local possui por volta de 20 contratados que participam do processo, sem
necessidade de formação, e é composto por duas áreas, a menor e que recepciona
as entregas por pessoas locais e de cidades próximas, sendo este um processo
conhecido como “pinga pinga”, que normalmente chegam em menor quantidade,
então ocorre o momento da triagem, onde há a separação e classificação desses
materiais.
Após a triagem, é feito a pesagem de cada material, pois cada tipo de material
possui o seu preço por kg, que definirá o valor que o cliente receberá em troca. Depois
desse processo, os materiais são levados para a outra área, o galpão. Quando
chegam em maior quantidade (atacado), esse processo ocorre diretamente no galpão,
e são pesados em uma balança de 12m.
4 RESULTADOS
5 CONCLUSÃO
Neste estudo o fluxo estudado foi o fluxo reverso das embalagens, que traz o
produto do seu destino final para o correto local de tratamento, que neste caso
especificamente, foi a empresa privada de reciclagem; Recimar Ambiental. Este
relatório apresentou e buscou esclarecer e demonstrar a contribuição que a logística
reversa traz quanto a preservação do meio ambiente através da reciclagem de
embalagens.
6 REFERÊNCIAS
SILVA, André Luiz Emmel; MORAES, Jorge André Ribas; MACHADO, Ênio
Leandro. Proposta de produção mais limpa voltada às práticas de ecodesign e
logística reversa. Engenharia Sanitária e Ambiental, v. 20, p. 29-37, 2015.