Escolar Documentos
Profissional Documentos
Cultura Documentos
I
República de Angola
Grupo nº2
SALA: 8
12ªCLASSE
TURMA: A
PERIÓDO VESPERTINO
Docente
II
Resumo
III
fogo, para um mesmo maciço rochoso, com o objetivo de se obter parâmetros de
avaliação de sua granulometria e analisar a melhor fragmentação possível para a
situação de produção de agregados. Em um segundo momento, para o plano de fogo
com melhor resultado, segundo sua fragmentação ideal, foram alterados os tipos de
explosivos usados e analisadas as variações na fragmentação final. Os resultados
esperados foram confirmados após a análise, onde se pode observar que menores
espaçamentos e afastamentos (malhas mais “apertadas”) geram um resultado melhor na
fragmentação do maciço e consequentemente atingindo o objetivo principal que é a
otimização dos custos para o processo de transporte e britagem do material e por fim
analisou-se também um dos metodós usados actualmente no estudo de pega de fogo de
forma ímprica de um modo geral.
Abstract
The present work the safe and economy mode of performing a fire handle
shows that an assessment of the variation of safety standards, vibration patterns of the
fire plan parameters for the open-air-to-the-goal parameters for the production of
aggregates for construction and exercises evaluated from Hematitta ore. A conditioning
that interferes directly in the dimensioning and cost of the fire plane is the
fragmentation, detonation, the rock according to its final destination. To obtain a quality
fragmentation, with characteristics that meet the aggregate production method, as well
as compatible with the equipment used by the company, the fire plan used in the
primary disassemble of the massive should be well defined. The mass of fussing was
IV
studied according to the Kuz-RAM model, where he initially sought to analyze the
results of the mass of fussing of the mass of the fire, for a rich rock mass, with the
objective of obtaining parameters of evaluation of its granulometry and analyze the best
possible fragmentation for the production situation of aggregates. In a second moment,
for the Foreground Plan with the best result, according to its ideal fragmentation, the
types of explosives used and analyzed the variations in the final fragmentation. The
expected results were confirmed after the analysis, where it can be observed that lower
spaces and more "tight" mechanles) generate a better result in the fragmentation of the
mass and consequently reaching the main objective that is the optimization of costs for
the process of transporting and crushing of the material and finally analyzed also of the
methods used in the study of fire handle in an optimally manner.
Lista de figuras
V
Figura 6- figura 1.6- Dados de entrada da fragmentação da rocha
VI
Figura 11- figura 1.11curva granulométrica e parâmetros do plano de fogo - situação de
cálculo 4
Índice
Introdução..........................................................................................................................1
Problema............................................................................................................................
Objectivos(geral e específico)..........................................................................................2
Metodologias....................................................................................................................2
VII
Métodos.............................................................................................................................2
Materiais............................................................................................................................2
Hipóteses...........................................................................................................................2
Justificativa........................................................................................................................2
Diâmetro de perfuração........................................................................................7
Malha de perfuração(S).............................................................................................7
Afastamento(A)............................................................................................................8
Esperamento ...........................................................................................................9
Malha alongada........................................................................................9
Subrefuração..........................................................................................9
Profundidade de perfuração(P)....................................................................10
Tampão (T).........................................................................................................11
VIII
Razão de Carga (RC) .............................................................................................12
Sequência de fogo.................................................................................................13
Introdução ................................................................................................... 17
Exercícios avaliativos......................................................................................................44
CONCLUSÕES .............................................................................................................51
REFERÊNCIAS ............................................................................................................53.
IX