Escolar Documentos
Profissional Documentos
Cultura Documentos
CONFIDENCIAL
ANÁLISE TÉRMICA
ASTM A367-60
Medidas da cunha
Região
coquilhada
Altura de
coquilhamento
THERMAL ANALYSIS is a classical method of determining phase diagrams. By melting and cooling an alloy of k
composition and registering the temperature-time curves, the liquidus temperature for the respective alloy c
Análise Térmica determined. Figure 1 shows an idealized view of the relationship between the cooling curves and the phase diagram
alloy A-B. The starting point for solidification is given by a change in the slope of the cooling curve due to the evo
of the heat of solidification. This starting point is normally used to define the liquidus temperature. The met
described more fully in Ref 1.
Análise Térmica
no with with Te
Fig. 3(b) Deviation of the cooling shown in Fig. 2 resulting from equilibrium solidification condi
line).
Análise Térmica
Análise
correlation wasTérmica
also found between EGA and the tensile strength, as follows:
TS = (180∙EGA + 170)∙(4.4 - CE) + 160 Eq. 5
where TS is the tensile strength.
Análise Térmica
Análise Térmica
Análise Térmica
Análise Térmica
Análise Térmica